Board separator conveyor

Drive experts UK CA

Condition: new, Year of construction: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Gisdpfx Alewt T Unj Tjw

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Gisdpfxow Nrhko Al Tsw

Condition: new, Year of construction: 2025, Log decks for band saws Gjdpfx Alsvt Dk Is Toiw Length 4 - 10 m Height according to band saw height 2, 3 or more chainlines with heavy duty chains Hydraulic or electric gear driven Hydraulic arm with separator for log landing on band saw table Hydraulic arm length 800 - 1500 mm depending from band saw Hydraulic driven chain on hydraulic arm for log movement

Condition: used, Year of construction: 2017, Country of manufacture - Italy INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW Godjv Nkaujpfx Al Tsiw

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Giedpfxsyvz Afs Al Tew Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: good (used), Complete Resaw Line from intake to stacker with an AKE TB2B twin rebandsaw Gjdpfom Uylpsx Al Toiw

Condition: used, Board packer Almab Board feed hills Board pack feed conveyors Board pack output conveyors Gsdpoymbpfefx Al Teiw

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers chamber dimensions 6.5 x 4 x 4.1m Giodovzuutepfx Al Tjw furnace power 350kW

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-maintained HIT arc conveyor / board or panel separator, robust design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with slat carriers, 6x2, 2 pairs. Giedpfjxl Ediox Al Tow Integrated edge roller conveyor. Transfer cross conveyor, can be raised and lowered. Slab flap. Drive with SEW geared motor with brake. Arc conveyor bolted in the middle for transport. Disassembled and ready to be loaded onto a truck. Ideal for use before a double edger or stacking system.

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,090 kg, arm reach: 2,655 mm, number of axes: 6, This 6-axis FANUC R-2000iC 165F robot arm was manufactured in 2019. It features a maximum reach of 2655 mm and can handle wrist weights up to 165 kg. The robot's footprint is 771 x 610 mm, and it operates on a 380-575V, 3-phase electrical system. Consider the opportunity to buy this FANUC R-2000iC 165F robot arm. Contact us for more information about this machine. Gjdpfx Ajx D Eb Sjl Tjiw • Repeatability: 0.05 mm • Max. wrist load: 165 kg • Robot footprint: 771 x 610 mm • Electrical supply: 380–575 V, 3-phase; 50/60 Hz • Average power: 2.5 kW • Integrated upper arm signals (In/Out, stop signals): 8/8 • Integrated air supply: 2 • Sound power level: 70.5 dB • Ambient temperature: not specified • Protection rating (mechanical, standard/optional): IP54 / IP56 • Protection rating (wrist & A3 arm, standard/optional): IP67 Additional equipment • Hose assembly (dress pack): transports electricity, air, or water from axis 1 to axis 6