Lifting Aid

DOTEC

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° Rjdpfx Ajxnvq Eja Djt • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Rsdpfsqt Dmysx Aa Dot The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information Redpownidhsfx Aa Det VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Rjdoi E Trpepfx Aa Djt

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Rjdpfeh Eld Esx Aa Dst

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 3.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 35 - 40 kg/h Blower air capacity, free blowing: 9.400 m³/hour Blow-out opening: Ø 700 mm Flue pipe connection Ø 220 mm Weight: 1.950 kg Rsdpfxodlhcre Aa Dst SPS control cabinet: 380 Volt

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Redslccvmopfx Aa Dst Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 Rsdpfx Aewhw Iuea Djt - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine.

Year of construction: 2013, condition: used, Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 motorized translating roller conveyor * 1 motorized roller conveyor for panel stack unloading Technical features: * Type: KR210-2 * Number of axles: 6 * Admissible nominal load: 210 Kg * Machine weight: 1267 kg * Sound level: 75dB * Installed power: 25.8 KW * Panel dimensions - Min\max length: 300\3000 mm * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm Redper Am Sqofx Aa Dst * Max panel weight: 90 kg

Condition: ready for operation (used), Year of construction: 1993, An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible. Rjdpfxouml S Nj Aa Dot