Cranes

Demag PK 2 F

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Dodjxf Uqfepfx Ab Tjla Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: used, No. 04485 Veneer press Ott JU 2513 Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Dsdpfxow Npbzo Ab Tela Plate dimensions 2550 x 1350 mm LW BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Demag chain hoist Design PK2N-F, PK2N Lifting capacity 250(1-leg) or 500kg(2-leg), Example photo, different versions available, Djdpfxecalf Ao Ab Tola ready to use condition.

Condition: used, Electric chain hoist crane DEMAG Type PK2N-F Lifting capacity: 500 kg Hook travel: 3.5 meters Distance from suspension to load hook: 500 mm Dsdpfx Asxcbm Isb Tola Lifting speed: 5 m/min Fine lifting speed: 1.25 m/min Pendant control cable length: approx. 1 meter Motor power: 0.5 / 0.13 kW Power supply: 380 Volt, 50 Hz 2 load chains = 500 kg Net weight: 32.5 kg Good condition

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Dledpfshrkrtox Ab Tsa Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: used, Electric chain hoist crane DEMAG Type PK2-F Load capacity: 500 kg Hook travel: 2 meters Dlodpfxsxcbmzo Ab Tja Distance from suspension to load hook: 500 mm Lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: 1.7 meters Motor power: 0.5 / 0.13 kW Power supply: 380 Volt, 50 Hz 2 load strands = 500 kg Net weight: 34 kg Good condition

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Dsdpfx Abjw Nac Ae Tsla Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press Dodpfstwp Iwex Ab Tsla connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Dsdpfxog Ezarj Ab Tsla Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, No. 04488 Veneer press Ott JU 2512 Used Heating plates 2500 x 1200 mm LW The plates are heated electrically, power per plate 8.4 kW Total pressing pressure 90 tons Specific pressing pressure 3.0 - 4.0 kg/cm2 4 pressure cylinders, each 90 mm in diameter Opening width 400 mm Button control for opening - stop - closing Circumferential emergency stop rip cord Technical documentation available Transport dimensions approx. 2900 x 1450 x 2000 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse Dedsxbh Atjpfx Ab Tjla