Top running trolley crane complete 3.2 tons.

DEMAG Kone cranes Laufkatze EKDR3-Pro 3-3,2 4/1 Hallenkran

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: Isdpou Axfcjfx Ag Ioib -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Iisdpjq Hr N Ijfx Ag Ijb

Condition: used, Valon Kone VK26M Iisdpovgtz Nsfx Ag Isb With infeed and outfeed conveyors.

Condition: good (used), Make: Ursviken Ijdpfekvmi Sjx Ag Ijib Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok Isdjvm Eixopfx Ag Ijib TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: good (used), Year of construction: 2004, A well-maintained Nicholson debarker is being offered for sale. The 4-arm rotor was replaced with a 5-arm rotor in 2010. The machine has already been dismantled. Iiodpfx Agew T U T Ds Ieb

Condition: good (used), log diameter 100-660mm Iiodpfxev Ap Sie Ag Ijb transverse and longitudinal feeder included

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Iodpfxoyryvue Ag Ieib

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Iedpfx Aekd Drhjg Isib Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 155mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Iodpow Anc Ejfx Ag Ijib Available immediately. Possible to test.