Temperature test chamber 350 liters

CTS TS-70/350 -70°C bis 180°C

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Maximum operating pressure: 9,5 bar Test pressure: 24 bar Maximum operating temperature: 192ºC Dujdpfx Aoq Nmuwofnsl Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power: 75 kW Cassel metal detector Dusdpextif Hofx Afnsl Approx. 40 linear meters of vibratory troughs

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! For more informations please contact us! Duodpeirfb Ejfx Afnel DN 20/DN40/DN50/DN65/

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Dedpfocbukrox Afnjul Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm Dodpfxsuz Hmxo Afneul - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Separate control for main drive and film transport. Siemens S7 control system. Siemens touch display. Photoelectric control of film transport. Cross and longitudinal heat sealing. Film adhesive table. Side folding unit. The machine is now equipped with the latest Siemens S7 control system! See video: youtube: VP220 packaging machine, shorts Dusdpfx Aovk Rv Sefnel

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Dedpfx Ajtr Dinefnsul Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger - Suitable for powder and granulate - Screw diameter: 35 mm Duedpfx Afjrvxn Ienjl

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Dusdpsudvg Rsfx Afnsl Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Dusdpjrziuyefx Afnsl