HEPA Filter

CORMAK HEPA Filtr CF510A

Condition: excellent (used), Year of construction: 2022,

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Fedpfx Aow Ad Rrolbegg Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Fedpozp Edwsfx Albjgg Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim Fgodozb N T Uepfx Albjg

Condition: new, Year of construction: 2025, Chip extraction unit ASA 4303 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, enabling extraction from below or above Robust metal fan impeller Equipped as standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 215 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/Depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Power consumption 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Maximum negative pressure 2000 Pa Scope of supply: Fgsdpfxohk S Sle Albjg Two filter bags, two chip collection bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Year of construction: 2011, condition: good (used), Due to repowering, a complete PV system with approximately 2,500 modules rated at 90 watts/module is available. Modules: Sharp NAG 090B5 90 watt, micromorph/tandem Inverters: 2x Kaco XP 100 9x Kaco 02Xi Commissioned in 2011 The modules have already been dismantled. Fgsdpfx Ajytx Tzjlbog Partial sale at a lower price is also possible. Ideally suited for halls or similar roof surfaces. Collection only. Technical documentation available. Sale without warranty!!!

Condition: like new (used), Year of construction: 2000, functionality: fully functional, LANGZAUNER LZG-S 10/7/14 Table size 2,750 x 1,000 mm, belt length 7,300 mm Description: infinitely variable electric adjustment electric table height adjustment, sanding belt cover, central, clearly arranged control panel, workpiece lighting, clockwise / anticlockwise rotation, motor brake, adjustable workpiece stop, removable table insert, for sanding drawer fronts, Sanding table guide with hardened, and ground guide shaft, closed belt drive disk, dust-tested, CE version Fgodpfxsumq Szs Albjg ----- Technical data ----- Projection: 1,000 x 350 mm, Motor 400 V: 5.5 kW, Removable table insert: 510 x 630 mm, sanding pad: 320 x 150 mm, Table height adjustment range: 350 mm, Ball bearings on each side: 6-fold, Belt speed: 22 m/sec, Suction nozzle Ø: 180 mm, weight: 900 kg Very good condition, see pictures

Condition: new, Opportunity: Glass modules from Swiss liquidation, 96 glass modules Fedpfxeyxth Se Albogg

Condition: used, No. 3245 Fsdpfxoxpilxs Albsgg Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 9 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 Dust Collector is an industrial dust extraction system designed for efficient and reliable removal of sawdust and wood chips in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key Features Powerful 3.8 kW motor (400 V) – ensures reliable, continuous industrial operation. Airflow capacity of 4,860 m³/h – efficiently extracts large quantities of sawdust and wood chips. Fjdpfsvu Rx Iox Albegg Metal sawdust extraction fan – durable steel impeller provides quiet, vibration-free operation. Heavy-duty steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise machine positioning even on uneven surfaces. Six collection bags (200 L each) – increased waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps allow fast, tool-free bag removal. Connection for up to four machines – extraction manifold with 1 × Ø180 mm and 4 × Ø100 mm ports provides flexible installation options. Construction and Technology The FM350 is equipped with a robust steel extraction fan and a reinforced frame designed for intensive industrial use. High-quality components ensure durability, overload resistance, and reliable operation during continuous production. The modern bag mounting system allows quick and convenient maintenance, while the powder-coated steel housing provides additional protection against wear and harsh workshop conditions. Precision and Performance Thanks to its large filter surface area and high suction pressure, the CORMAK FM350 dust collector provides excellent working conditions even during intensive woodworking operations. Efficient dust separation helps maintain cleaner air, improves workplace comfort, and increases operator safety. Applications The FM350 is ideal for: Wood processing plants – extraction of chips and dust from saws, planers, and milling machines. Professional woodworking workshops – suitable for multi-station operation. Technical schools and educational workshops – efficient dust extraction for training environments. Large industrial halls – where a high-capacity sawdust extraction system is required. Standard Equipment 3 fabric filter bags 3 fabric waste collection bags Extraction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional Equipment Galvanized hose clamps 3-micron filter cartridge insert Technical Specifications Specification Value Airflow capacity 4,860 m³/h Collection bag capacity 3 × 200 L Number of bags 6 Extraction inlets 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 2,355 × 590 × 2,150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase, 400 V