Combined machine

CORALI

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The production line is ideal for example, to produce paper and cardboard pallets. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. Facts about the line - Deck nailing unit - Leg nailing unit Ncodpfxoy Exvno Agkjw - Assembly unit - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 The buyer will be responsible for dismantling and transporting the line at the agreed schedule. The line will be sold as a single wholeness.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Wood-Mizer WB2000 Bandsaw (Year of manufacture: 2020) Offered for sale is a Wood-Mizer WB2000 from 2020, which has only been in operation since 2021. The machine has been regularly maintained, used very little, and is in excellent technical condition. Technical specifications: Njdpfxoyha Ipe Agkscw powerful 30 kW electric motor Log diameter up to approx. 1 m Cutting width up to about 90 cm Load capacity approx. 6 tons Suitable for 90–100 mm wide band saw blades Equipment (included): complete loading/infeed conveyor outfeed table with three-way material distribution (left / right / straight ahead) Camera system for cut monitoring PRO operator panel with touchscreen retrofitted quick-clamping system The machine can be inspected and tested on site; everything works perfectly.

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Ncsdpfxjyh A Iie Agksw Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Nedpfx Asv Hm T Sogkscw Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Ncodpfx Agewl Hyuokew Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Ncsdpfjtv Ivzjx Agkew Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished Nedpsdzc Rxefx Agkscw 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Nedpfxolrtnts Agkjcw Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table Ncedpoxx T Rdjfx Agkow - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Nedexq Rrcjpfx Agkscw