Tampondruckmaschine / Pad Printing

ColorPrint CP

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Cjdpsrmul Dofx Aa Eepw Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Cpodpog Ezarsfx Aa Ejw Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm Cpsdpfxsulnbke Aa Esw tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS Cpodpfxetuut Us Aa Ejw INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: as good as new (ex-display), Year of construction: 2014, operating hours: 200 h, functionality: fully functional, machine/vehicle number: MTP87UK-0320, number of ink cartridges: 4, total length: 5,020 mm, total width: 1,430 mm, total height: 1,920 mm, type of input current: AC, input voltage: 230 V, overall weight: 1,041 kg, energy consumption: 12 kWh, product width (max.): 330 mm, warranty duration: 1 months, Equipment: auto duplex, documentation/manual, raster image processor, DP8700 XL Specifications - Largest format size..... 330 x 1,200 mm - Smallest format size..... 100 x 148 mm - Maximum print area ..... 318 x 1,180 mm - Output speed (sheets per hour) ..... 4,260 A4/Letter or 2,280 A3 pages/hour - Print resolu..... 95 to 270 lpi - up to 3600 dpi, 5 preset Stochastic modes - Substrates - Paper ..... 65 to 400 Gsm - Plastics ..... 100 to 400 micron - Envelopes ..... DL-C4 with or without windows Codpfx Aaor Eyx Rs Ejpw - Three (2) input trays ..... 750 sheets per tray - High capacity loader .....000 sheet max capacity - High capacity stacker .....Up to 6,000 sheets - Bypass tray ..... 250 sheet capacity - Precise registration ..... +/- 0.2 mm - Auto duplexing from 2 trays ..... Up to 300 Gsm Workflow - Fiery Command Workstation RIP .....Ad obe PS3 - JDF Complient-Print queue management-Auto trap - ICC/ICM color management-Pantone certification with spot-on - Integrated automatic calibration with eye-one spectrodensitometer - Workstation ..... Intel Pentium Dual Core - Centralized job management -Flexible previews - Cohesive tool integration - Variable data NEWLEAF, PrintSoft, Seagull Scientific Bartender, InDesign, Print Shop Mail - Substrate library ..... Storable substrate values

Condition: used, Year of construction: 2016, operating hours: 100 h, functionality: fully functional, number of ink cartridges: 4, MGI Meteor DP8700 XL Plus with iFoil and envelope feeder, very little used Cpsdpoxcup Nefx Aa Eew

Condition: excellent (used), Year of construction: 2008, Climaveneta cold machine (Schiller - water) Year 2008 Cpodpfx Aajf S A R Hj Eew Type:FOCS/LN 0751 WEEK 70,1

Condition: excellent (used), Year of construction: 2002, Tampoflex TF 150 E tampon printing machine cliché board: 400x250mm tampoprint control Cjdpfxsh Rv Sij Aa Ejpw voltage: 230v 50Hz air: 4-6 bar machine dimensions: 1200x1600x600 weight: 240 kg

Condition: excellent (used), The machine was built in 2007 and has only worked 5,000 hours. It was used exclusively to test casting molds, which explains the low operating hours. The machine can be inspected and tested under power in Germany – 64850 Schaafheim. Cedpfx Aexldtija Ejpw For further information, please contact us. In addition to the machine, plastic granulates as well as various accessories and spare parts (see photos) are also available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located fully assembled in 64850 Schaafheim (Germany). Condition: The machine can be connected to power and demonstrated. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen and tool specifications: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold height: 250 mm Maximum mold height: 700 mm Daylight: 950 mm Center bore: Ø 125 mm Main technical data Feature Description Manufacturer ENGEL AUSTRIA GmbH Machine type Victory 1050/220 Power Year of manufacture 2007 Machine no. 167023 Control system ENGEL CC control (touch panel, graphical user interface) Clamping force 2,200 kN (220 t) Screw diameter Suitable for HP 1 nozzle (Ø 50–120 mm) Injection pressure Up to 3,000 bar at 400 °C Injection volume (PS) Up to 1,600 cm³/s The machine can be inspected and tested at any time at our facility in Schaafheim by prior arrangement. Best regards

Condition: used, functionality: fully functional, In this offer you buy a used cutting plotter "Roland VersaSTUDIO GS2-24" Object of sale: 1 x Roland VersaSTUDIO GS2-24 Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has not been tested for function Packaging and dispatch: Cedpfjwymgwox Aa Eepw You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.