Thermal & Vibration Chamber/holding chamber

CHART USA Thermal & Vibation Chamber Chart TVC-4

Condition: excellent (used), Here we offer you Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water Cooled Working volume: 227 liters Temperature uniformity: All models 0.7°C Psdpfx Aemhfr Ijdnjgw Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx 400 kg Internal dimensions width 610 mm x depth 610 mm x height 610 mm Outer dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating power in minutes -65º to 180ºC: 43 Heating power in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full power amplifiers 220/1/50: 27 Cooling capacity in minutes 85º to -40ºC: 32 Cooling capacity in minutes 71º to -65ºC: 54 Cooling capacity in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), HALT/ HASS Espec Here we offer you a temperature chamber. Temperature -100 to + 200°C Table in lower position (WxDxH) 889 x 889 x 889 mm Table in upper position (WxDxH) 889 x 889 x 635 mm Overall dimensions (WxDxH) 1425 x 1748 x 2134 mm Work table 762 x 762 mm Max load 145 kg Acceleration 5 to 75 gRMS Pjdpfx Adeqwybgonegw Voltage 480 or 440 V / 60 A / 3F 400 or 380 V / 80 A / 3F Type: Qualmark T2.5 + compressor 99480630 Condition: used Only 147 hours Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: Podpsv Tnd Ssfx Adnogw 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), RMS Type: SW 3509 + amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power amplifier: TGD 6000 Vibration exciter: SW 3709 High-pressure fan HVM 80-100 GL 270 RMS electrodynamic vibration test system: Technical data system: Performance data Max. Vector force sine 7.5 kN Max. Vector force noise 6.75 kN Max. Vector force shock 13.1 kN Frequency range 0 - 3000 Hz Mass of the vibrating system (Dyn.) 9 kg Main resonance (unloaded) 2.5 kHz Max. Amplitude (sine) 18 mm (noise, shock) 26 mm Max. speed (sine) 1.5 m/s (noise, shock) 2.5 m/s Max. Acceleration sine vibrating system unloaded 833 m/s² Additional load 10 kg 394 m/s² Additional load 30 kg 192 m/s² Additional load 50 kg 127 m/s² Max. Acceleration noise Additional load 30 kg 173 m/s² Max. Acceleration shock vibrating system unloaded 1450 m/s² Additional load 30 kg 335 m/s² Stray field Stray field without counter field coil On the table surface 20 mT 120mm above the table surface 7 mT Stray field with counter field coil On the table surface 10 mT 120mm above the table surface 2 mT Vibration isolator Operating range vertical/ horizontal Resonant frequency 2.7 Hz Operating air pressure 5 bar Pneumatic weight compensation Max. Weight compensation 250 kg Operating air pressure 2.3 bar Cooling Vibration exciter air min. Cooling air volume 9 m/min Max. exhaust air temperature (based on room temperature 35°C) 80°C Psdju Tud Hjpfx Adnogw Power booster air Heat dissipation to room air 1.5 kw Emission: Sound pressure level 1m - distance at a height of 1.6m 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT ( 50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / insert thread 224mm / M8 Vibration exciter with integrated isolators 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier 550 x 700 x 2075 mm (W x D x H) Weight: 270 kg Cooling fan 839 x 582 x 900 mm (W x D x H) Weight: 80 kg Connection values: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load 18 KVA Power consumption (sweep mode sine wave) 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.