Rivet header

Carlo Salvi RF/635/SV

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/8324, Offer Number: M20I/8324 Machinetype: rivet header Itsdpfx Aswi Udcehbjn Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 2-6,35 mm shaft length under head: 70(65) mm cutting length: 87 mm output pieces/min: 360(320) Location: Germany

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT Itodpfx Aheuhav Deben - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Location: In our warehouse Itsdpfx Ahjx Edtcobon

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Itjdpfxohrdmxs Ahbjn Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Itjdsuz If Nspfx Ahbsn Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, ORT RP18B overhauled Ijdjuua H Rspfx Ahbotn

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine Itedpfx Ahjvffcpsben TECHNICAL DATA Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 2005, condition: ready for operation (used), - USED - 6-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 320 mm MAX TURNING DIAMETER: 32 mm SPINDLE: 200-8000 rpm; 3,7 - 7,5 kW COUNTER SPINDLE: 200-7000 rpm; 1,5 - 2,7 kW X1-AXIS TRAVEL: 108 mm X2-AXIS TRAVEL: 228 mm Y1-AXIS TRAVEL: 275 mm Z1-AXIS TRAVEL: 325 mm Z2-AXIS TRAVEL: 130 mm Z3-AXIS TRAVEL: 410 mm RAPID FEEDS X-Y-Z: 20 m/min DRIVEN TURRET HEAD: 8 POS; 200 - 5000 rpm CONTROL UNIT: CINCOM SYSTEM M6D BAR FEEDER: IEMCA Mod. BOSS 332 EVOLUTION Iedpfxovthv Io Ahbjtn WEIGHT: 2850 Kg ACCESSORIES: PARTS CATCHER

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Itjdpfx Aoya Aq Rjhbjn Power: 0.5 kW C axis indexing accuracy: 1° Tool post 1 Number of positions: 5 Driven positions: 2 Rotating tool speed: 8,000 rpm Tool post 2 Number of positions: 3 End-working attachment Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] - Number of working hours : 11500 [h] EQUIPMENT - CNC : Fanuc Oi TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece Iodpfewizt Dsx Ahbetn - Chips conveyor - Coolant tank - Bar loader : Tornos SBF 320 - Electric transformer