6 die - 6 blow transfer header

Carlo Salvi 663/TR

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: M08L/9038, Offer Number: M08L/9038 Machinetype: 6 die - 6 blow transfer header Info: bushing cut-off Make: Carlo Salvi Type: 663/TR Constr. year: 1994 diameter range: 5 mm number of dies: 6 number of stations (incl. cut off): 7 cutting length: 35 mm shaft length under head: 25 mm output - pieces/min: 400 Iedpfjw N Dmfjx Adnja dimensions: 12x35 press power: 15 to Location: In our warehouse

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm Isdsv Sva Eopfx Adnja minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Isdpfx Adow Sm U Djnea Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: reconditioned (used), functionality: fully functional, No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Ijdpfxjtvfhcj Adnoa Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Iedpfx Adour N Daensa The machine is ready for immediate use!

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024 Operational, working. Available for any test. Ijdpfetxni Njx Adnja Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: used, Year of construction: 1981, National 2-3 Hot Former Iodpfx Adewl Iw Usnja induction heater, feeder, straightener

Condition: ready for operation (used), Year of construction: 1983, BOLTMAKER SACMA SP.17 – 4 dies Fully functional with thread rolling machine up to M6. Incoterm: EXW The machine operates without any issues. Technical specifications below: Number of dies: 4 Heading tonnage: 480 kN Max. cutoff diameter at 500N/mm²: 8 mm Max. cutoff length: 65 mm Isdpfewvt Hvjx Adnoa Kickout stroke die max.: 45 mm Kickout stroke punch max.: 14 mm Max. thread 8.8/12.9: M6 Speed (pcs. per minute): 350 Main motor power: 26 kW Die diameter: 45 mm Die length: 70 mm Fixed punch diameter: 38 mm Fixed punch length: 85 mm Net weight: 10,000 kg Gross weight: 11,900 kg The machine is available for any inspection.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7593, Offer Number: M06L/7593 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP16 Constr. year: 1972 Isdpfjwi S Swex Adnsa diameter range: 8-16 mm shaft length under head: 25-180 mm max. cut-off length: 220 mm output - pieces/min: 70 Location: In our warehouse

Year of construction: 2021, condition: new, I will sell unusefd a VESPA 50/80 VGA mill. We are selling due to a change in the production profile. The cost of a new one is over 50,000 Euro. The mill is designed to recycle plastic waste and rejects, primarily from injection and blow molding processes. Year of manufacture: 2021 Capacity: up to 900 kg/h Rotor length: 800 mm Rotor diameter: 500 mm Rotor speed: 580 rpm Mobile knives: 6x400 no/mm Fixed knives: 4x400 no/mm Dimensions LxWxH: 2340x1630x3315mm Motor: 45kW Cooling: air Tank opening: manual Infeed opening: 820 x 565 mm Feed opening height: 2660 mm Diameter of sieve holes: 10 mm Sound-absorbing AEG fan motor: 7.5 kW Fan turbine diameter: 500 mm Flexible pipes: ⌀ 150 mm / ⌀ 125 mm Frame dimensions with cyclone Lx BxH: 2690 x 1440 x 4800 mm Weight with fan and cyclone: ​​4600 kg Isdpekzhfiofx Adnea Included: - A set of spare knives - Spare sieve