Coordinate measuring machine

Carl Zeiss Vista mot

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Kedpexuqv Ajfx Ad Njwt Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm Kedpfxsq Evn Eo Ad Njwt - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Kwedpfx Ajqfcvijd Not - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Ksdpfx Aeu E U Hbjd Nowt Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. Kodpfxoitcq Ts Ad Nswt They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

Condition: used, Year of construction: 1998, charge load 620 liter Outer dia. of work tank 1695 mm tank length (expanded) 3800 mm width of working tank 430 mm speeds 900 - 1485 U/min voltage 400 V total connected load 7,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap Kwedpsw Hnr Isfx Ad Not

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Kwodpfx Aeul Efmjd Njt Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Article: clamping head Manufacturer: Different For multi spindle automatic lathes, used and new Kedpfjn H Nzusx Ad Nswt Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Kwodoi Ra Tyspfx Ad Nst Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 Kedpeiuz Tgefx Ad Nowt 400 Volt power 1,8 kw