Y - Crane traverse with variable chains

CARL STAHL Y 7 T

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Ijdpfx Aeur H I Nsqusic Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed Iedpfekvmi Sjx Aqusic 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Steel construction for crane system Width: approx. 8,3 m Length: approx. 5.1 m Plant dismantled The plant is sold "as is". Iodpfx Aqobruzbsusic Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no redemption possible.

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes * jib cranes * KBK rail cranes * boat lifts All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Iedjya Ag Sspfx Aqueic Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Platform size 7100 x 2500 mm Inspection valid 11.2025 Ijdpfxjwq N Sdj Aqusic Length:7100mm Width:2500mm Height:900mm

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Isdpfehyc Nwox Aqusic Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Iijdox U Exujpfx Aqujc

Condition: used, Year of construction: 1992, x-travel 1400 mm y-travel 1200 mm z-travel 1000 mm Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t Iiodpfx Asftfczequec dimensions of the machine ca. 2 x 1,5 x 2 m

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop. Iijdpfotqwrvex Aquoc

Condition: new, functionality: fully functional, turning diameter over cross slide: 438 mm, spindle bore: 85 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 1,500 mm, quill stroke: 165 mm, quill diameter: 85 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, bed width: 400 mm, quill mount: MK 5, Equipment: rotational speed infinitely variable, Tip height: 330 mm Center distance: 1500 mm Ijdpfx Aem E Umiequjic Spindle bore: 85 mm Spindle nose according to DIN 55029: Camlock D8 Gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Features and more: Each gear stage is infinitely variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates