Used lowboy semi-trailers / low loaders for sale (204)

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body Body: Aluminum wheel wells, floor length 1,800 mm per well, load capacity 6,200 kg, package price ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ledpfx Aoi Rqirjncjaa - .

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Ledpowx Dbiefx Ancoaa Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: Ledpfx Aoxf Silsncsaa - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: excellent (used), functionality: unexamined, empty load weight: 18,940 kg, maximum load weight: 71,630 kg, overall weight: 18,940 kg, axle configuration: > 3 axles, first registration: 12/1992, loading space width: 3,100 mm, suspension: hydraulics, tire size: 245/70R22.5, wheelbase: 1,360 mm, color: blue, Year of construction: 1993, operation weight: 90,300 kg, Noteboom OSBDAZ-66 Lasdpfxexgh Exe Ancsa 90T Machinery Transport Gondola Low-bed Front loading and unloading 4 steering axles

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Laodpfsw Tpq Dsx Ancsa Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: Lsdpfx Asxu Nnwsncjaa We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, maximum load weight: 51,870 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractors: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * At the front connection strip: yellow-red air couplings * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations * External beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the gooseneck external beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized version * On the gooseneck, 1 plug-in aluminum rear wall, approx. 400 mm high, anodized version * Approx. 40 mm thick hardwood flooring above the gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear gooseneck mounting for aluminum ramps * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Loading platform, extendable version, length approx. 8,800 mm, rear with chamfer approx. 500 mm x 10° * Recess in the platform and chamfer for accommodating the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension * 1st and 2nd axle fixed, 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Complete platform and interrupted between the axles with approx. 50 mm thick hardwood flooring (increasing the coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm * Elongated slots for insertable and repositionable bridging elements at the front of the platform * Intermediate table with set-down platform, approx. 300 mm wide, for large cross-section telescopic tube with sheet metal covering – front and rear with elongated slots for insertable and repositionable bridging elements – removable cover flush with the platform * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of flush-mounted lashing rings in the outside frame of the platform, foldable outward (LC 10,000 daN) * Additionally, 1 pair of lashing rings externally on the front cross member of the platform, approx. 90° turned inward towards the platform (LC 10,000 daN) * Extendable galvanized widening extensions by approx. 230 mm per side Laodpfxjxtc Uho Ancea * 1 pair of permanently installed wheel recesses, open up to the extension, approx. 700 x 410 mm (W x D), sheet-covered in the platform ahead of the 1st axle, wheel recesses with square climbing strips approx. 15 x 15 mm, spaced approx. 200 mm * Between the 2nd and 3rd axles, 1 pair of permanently installed wheel recesses on the platform, approx. 1,695 x 700 x 410 mm (L x W x D), covers for wheel recesses split lengthwise, with wooden overlay, outer plug-in loc

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Lodjkqmuuspfx Ancoaa Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: new, machine/vehicle number: 2428b2018baf171e60fef6740, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions, 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Mudguards in front of 1st axle and rear of each axle with anti-spray, according to EC Lsdpfx Aei Ri E Rsncsaa Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on gooseneck 11 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 x on gooseneck 9 x distributed in the low loading area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 brand of the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 LED rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with sheet steel covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 9 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK socket NW 10/3, without connecting hoses Operating instructions With 10,000 kg axle load, a special permit is required, only indivisible load possible!!! Special permit required if total train weight exceeds 40 tons! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) When applying for a special pe

Condition: new, machine/vehicle number: 364a8214fd0c4afa2b936c7db, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions (not in conjunction with forced steering) 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation Folding rear support Wheel chocks with holder Aluminum side collision protection Spray flaps in front of 1st axle and rear of each axle with anti-spray, according to EC Stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically to pass over the gooseneck, with mechanical lock when raised. Operation with radio remote control Electric cable winch, 24 volt, tractive force 8165 kg, mounted in the middle at the very front of the loading area, standing on the gooseneck, in stainless steel box with door (if technically possible, exact testing still required), operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers on gooseneck and rear inclination. Lajdpoi Ri E Uofx Ancsa Low loader lashing eyes Gooseneck:5 pairs of lashing eyes recessed in the outer frame, each with 5 to.2 pairs of lashing eyes in the middle, each with 5 to.1 pair of lashing mushrooms on the top and outside of the outer frame recessed in the neck slope, each with 10 tisch:4 pairs of lashing eyes recessed in the outer frame, each with 5 to.4 pairs of lashing eyes in the middle, each with 5 to. Pair of lashing eyes in the middle, each 5 to.1 pair of lashing mushrooms at the top and outside of the outer frame, each 10 fbett:4 pairs of lashing eyes in the outer frame, each 5 to.5 pairs of lashing eyes in the middle, each 5 to.4 pairs of lashing mushrooms at the top and outside of the outer frame, each 10 to. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve, with hold function for lowering + auto-reset function Wheels and tires 235 / 75 R 17,5 according to manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Lights completely in LED design (note! with certain towing vehicles, misdiagnosis may occur, although the function is given) 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Additional LED work light(s) at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light (light can be removed) Pair of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Gri

Condition: used, empty load weight: 6,600 kg, maximum load weight: 23,400 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 09/1991, next inspection (TÜV): 09/2021, loading space length: 10,200 mm, loading space width: 2,430 mm, loading space height: 2,900 mm, suspension: steel, tire size: 9.5R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axles, BPW axles, leaf springs, lashing eyes, hydraulic ramps, rear support, supports, twin tires Lsdpfx Anoi Rk U Hecjaa Construction: 2-axle low-loader trailer with solid walls, tarpaulin and continuous hydraulic ramp, loading height approx. 950mm! Tires approx. 40-70%! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 5,580 kg, maximum load weight: 30,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/1988, loading space length: 12,700 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, total length: 2,500 mm, total width: 4,000 mm, suspension: air, tire size: 9.5R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, pallet box, twin tires Body: Ideal showman trailer Zorzi axles, loading area over axles 9000mm loading area over pins 3700mm, 3x Zorzi axles, approx. 3.000,- EUR were recently invested in brakes and axles! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lajdpsi Rnu Usfx Ancea

Condition: used, empty load weight: 9,000 kg, maximum load weight: 25,500 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 01/1977, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 2,500 mm, total width: 1,750 mm, suspension: steel, tire size: 8.25 R 15/18 PR, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, leaf suspension, forced steering, access ramps can be attached Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering, gooseneck 4,100 mm, turning dimension from corner/slope to kingpin center 1,800 mm, drum brakes ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ledpfx Aei Rqwfsncsaa - .

Condition: new, maximum load weight: 25,000 kg, overall weight: 35,500 kg, axle configuration: 3 axles, loading space length: 8,900 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2025, Equipment: ABS, GVN 3GVN*O4*OVERSIZE PANEL*KOC*LIFT*PE ----VEHICLE HISTORY * NEW VEHICLE 04/2025 * VIDEO AVAILABLE UPON REQUEST VEHICLE SPECIFICATIONS EQUIPMENT & SPECIAL FEATURES Lsdpfowwn Uwjx Ancsaa * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FIRE EXTINGUISHER HOLDER * EXTENDABLE PANEL FOR OVERSIZE LOADS * OVERSIZE WIDTH SIDE SKIRTS * STORAGE BOXES ON BOTH SIDES * FRONT STORAGE COMPARTMENT BELOW NECK * LOADING AREA ON THE NECK * WARNING PANEL FOR OVERSIZE LOADS * OSMAN KOC AXLES – DESIGN IDENTICAL TO BPW AXLES * FIXED HYDRAULIC RAMPS * ADDITIONAL SUPPORT LEGS * LASHING POINTS * POWER CONNECTION FOR HYDRAULIC RAMPS * TRAILER LIGHTING SYSTEMS * PRESSURE GAUGE * SWIVELING REVERSE LIGHTS * DOUBLE FIFTH-WHEEL KINGPIN MOUNT AXLES & WHEELS * NUMBER OF AXLES: 3 * WHEELS: 12 * TWIN TIRES: ALL AXLES * STEERING AXLE: 3RD AXLE * LIFT AXLE: 1ST AXLE * TIRES: 235/75 R17.5 * SPARE TIRE: YES DIMENSIONS * WHEELBASE: 10,200 MM * AXLE DISTANCES: 7,360 / 1,420 / 1,420 MM * OVERALL LENGTH: 12,900 MM * WIDTH: 2,550 MM * HEIGHT: 3,000 MM * COUPLING TO END OF VEHICLE: 11,600 MM * LOADING AREA LENGTH: 8,900 MM * REAR OVERHANG: 1,400 MM * OVERALL LENGTH WITHOUT RAMPS: 12.9 M * NECK HEIGHT FROM GROUND: 1.4 M * LOADING AREA HEIGHT FROM GROUND: 0.9 M CARGO AREA DIMENSIONS * LOADING AREA: 8.8 M LENGTH / 2.55 M WIDTH / 3 M WIDTH FOR OVERSIZE * CARGO AREA OVER NECK: 1.8 M LENGTH / 2.4 M WIDTH * RAMPS: 3.23 M LENGTH / 0.75 M WIDTH WEIGHTS & LOADS * EMPTY WEIGHT: 10,500 KG * AXLE LOAD DISTRIBUTION: 2,820 KG EACH * GROSS PERMISSIBLE WEIGHT: 58,000 KG (TECHNICAL) * PERMISSIBLE AXLE LOAD PER AXLE: 12,000 KG * PERMISSIBLE AXLE GROUP: 36,000 KG * INTERNATIONAL APPROVED GROSS MASS: 35,500 KG * INTERNATIONAL AXLE LOADS EACH: 8,000 KG * INTERNATIONAL AXLE GROUP: 24,000 KG * SADDLE PLATE SUPPORT LOAD: 22,000 KG DRIVING BEHAVIOR & SUSPENSION * MAXIMUM SPEED: 80 KM/H * LIFT AXLE: 1ST AXLE * STEERING AXLE: 3RD AXLE * SUSPENSION: FULL AIR SUSPENSION ON ALL AXLES BRAKE & TECHNICAL DETAILS * BRAKE SYSTEM: WABCO T EBS-E * DRUM BRAKES * COUPLING: E20*55R-01 3753 * D-VALUE: 190 KN BODY & APPLICATION * BODY TYPE: LOWBED SEMI-TRAILER DA 29 * SPECIAL USE: SK EXTRAORDINARY ROAD TRANSPORT * EXPLOSIVE TRANSPORT (UNECE R105): NO * READY FOR IMMEDIATE USE! ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ---- EXPORT DECLARATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 30-DAY PLATES AND 17 - 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required. (For sales to the EU and third countries will be levied deposit/guarantee of at least €500.00 / €1,000.00) Subject to change, errors, and prior sale! More vehicles can be found on our homepage: Sales are made exclusively according to our terms and conditions – see homepage Important notice: Despite careful verification of all details in our offer, errors may occur. In some cases, these arise from transmission errors in the systems of various platform providers.

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos Lasdpfjwxm Ilex Ancoa * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: Lajdpfsw Tprzsx Ancsa * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Lsdpfx Anjxwa Uyjceaa Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Laodpfx Anjv Etx Escoa * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 23,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, GVN 3GVN29 OVERSIZE PLATFORM *KOC*LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT TECHNICAL DATA AND EQUIPMENT SHEET VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL TRADING DESIGNATION: * 3GVN29 ----WEIGHT SPECIFICATIONS CURB WEIGHT * 13,000 KG DISTRIBUTION OF THIS WEIGHT ON THE AXLES 1ST AXLE: 3,653 KG 2ND AXLE: 3,653 KG Ledpfxew Dlqij Anceaa 3RD AXLE: 3,653 KG ACTUAL VEHICLE WEIGHT * 13,000 KG TECHNICALLY PERMISSIBLE MAXIMUM GROSS WEIGHT * 58,000 KG TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1ST AXLE: 12,000 KG 2ND AXLE: 12,000 KG 3RD AXLE: 12,000 KG TECHNICALLY PERMISSIBLE MAXIMUM WEIGHT ON AXLE GROUPS 1ST GROUP: 36,000 KG MAXIMUM GROSS WEIGHT FOR REGISTRATION PURPOSES * 35,500 KG MAXIMUM AXLE LOADS FOR REGISTRATION PURPOSES 1ST AXLE: 8,000 KG 2ND AXLE: 8,000 KG 3RD AXLE: 8,000 KG MAXIMUM WEIGHT ON AXLE GROUPS FOR REGISTRATION PURPOSES 1ST GROUP: 24,000 KG TECHNICALLY PERMISSIBLE MAXIMUM STATIC LOAD ON COUPLING POINT * 22,000 KG TECHNICAL MAIN DIMENSIONS (COC) * OVERALL LENGTH: 13,050 MM * LOADING PLATFORM LENGTH: 9,200 MM * VEHICLE WIDTH: 2,550 MM * OVERALL HEIGHT: 3,000 MM * PLATFORM HEIGHT: APPROX. 910 MM * NUMBER OF AXLES: 3 * TIRE SIZE: 235/75 R17.5 * SUSPENSION: AIR SUSPENSION * COLOR: RAL 5011 ----EQUIPMENT LIST * EXTENDED GOOSENECK * FIXED GOOSENECK * STEEL FRONT WALL * 2 REMOVABLE SIDE DOORS MADE OF STEEL * 1 REMOVABLE REAR FLAP MADE OF STEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER NECK * LOADING PLATFORM ON THE GOOSENECK LOADING PLATFORM * HIGH-STRENGTH S355 STEEL * PLATFORM EDGES CLAD WITH WOOD * SURFACE COVERED WITH STEEL PLATE * 14 SIDE EXTENSIONS EACH +230 MM * 14 FORGED STEEL LASHING EYES, EACH 16 TONNES * EXTENDABLE PANEL FOR OVERSIZE WIDTH * OVERSIZE WIDTH MARKER * WARNING SIGN FOR OVERSIZE WIDTH * ATTACHMENT POINTS * ADDITIONAL SUPPORTS * PRESSURE GAUGE AXLES AND SUSPENSION * 3 AXLES * OSMAN KOC AXLES, IDENTICAL TO BPW * STEERED 3RD AXLE * LIFT AXLE: 1ST AXLE * TWIN TYRES ON ALL AXLES * FULL AIR SUSPENSION ON ALL AXLES * 1ST LIFT AXLE, DRUM BRAKES BRAKE SYSTEM * EBS SYSTEM WABCO ELECTRO-PNEUMATIC EC STANDARD * AUTOMATIC REVERSE ALIGNMENT OF STEERED AXLE * DRUM BRAKES ON ALL AXLES TYRES AND RIMS * TYRES 235/75 R17.5 * SPARE TYRE: YES * WHEELS: 12 * MAX. SPEED: 80 KM/H * RIMS: 6.75X17.5 STEEL SILVER-GREY * SPARE WHEEL AVAILABLE COATING * 2 COATS EPOXY PRIMER, EACH 100 MICRON * MIN. 100 MICRON 2K ACRYLIC PAINT * COLOUR: RAL 5011 ELECTRICS AND LIGHTING * 24 VOLT SYSTEM TO EC STANDARD * WATERPROOF AND FROST-PROOF CONNECTIONS * SIDE AND MARKER LIGHTS * 6 REARLIGHTS, 3-FUNCTION * 2 REVERSING AND WORK LIGHTS * 2 INDICATORS * 2 NUMBER PLATE LIGHTS * 1 BEACON * 2 TRIANGULAR REFLECTORS * REFLECTIVE STRIPS AND E-MARKING * TRAILER LIGHT SYSTEMS * ROTATABLE REAR FLOODLIGHTS RAMP * FIXED HYDRAULIC LOADING RAMPS * HYDRAULICALLY ADJUSTABLE LEFT/RIGHT * SUPPORT JACKS: 24 TONNES DYNAMIC, 50 TONNES STATIC OMS * MANUAL RAMP SUPPORTS * POWER CONNECTION FOR HYD...

Condition: used, maximum load weight: 31,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, total width: 2,550 mm, Equipment: ABS, Meusburger MPG-3 Low Loader Tarpaulin with Steering/Lift Axle Equipment: Air Suspension Laodowfwd Depfx Ancja * Axle Balancer * 1st Axle Lift Axle * 3rd Axle Steered * Hydraulic Ramp with Additional Support & Radio Remote Control * Drive-Through Ramp * Electric Cable Winch with Radio Remote Control * Edscha Roof * Storage Compartments on Both Sides * Spare Tire in Standard Tire * Additional Headlights * Extendable Wide-Width Side Panels Safety: ABS * EBS * Disc Brakes Subject to error and prior sale. Internal Vehicle Number: 8303

Condition: used, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 07/2002, loading space length: 11,900 mm, loading space width: 2,450 mm, loading space height: 3,150 mm, Equipment: ABS, * Vehicle has French papers * Floor adjustable with radio/remote control * Folding ramps with radio/remote control * Edscha soft top currently removed Lodpfev Tgv Tsx Anceaa As viewed or offered, without further services / accessories. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! The information provided in advertisements, the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. Subject to errors and prior sale.

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body Body: Aluminum wheel wells, floor length 1,350 mm per well, load capacity 6,200 kg, package price ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ljdji Rqinspfx Anceaa

Condition: new, machine/vehicle number: df15479123e15bcf265d560e1, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Telescoping Central tubular frame in neatly welded telescopic frame sections that run into each other. Extendable by max. 6,000 mm and can be arranged approx. every 1,000 mmPayload/point load is reduced when extended! Locking mechanism with mechanical bolt lock With sliding table Low loader lashing eyes 2 pairs of ring lashing eyes each 5to at the front on gooseneck 11 pairs of lashing mushrooms at the top and at the side embedded in the outer frame each 10to 2 x on gooseneck 9 x in low-loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between the lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 3 pairs of additional hinged lashing eyes embedded in the low bed, 10 to each1x at the start of the low bed, 1x in front of the 1st axle and 1x behind the 3rd axle Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last 2 axles self-steering, with automatic reversing lock via reversing light and manual locking function via hand button on the vehicle. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5 Fulda tires Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin interchangeable sockets at the front, without connecting cable Lodpfxoi Ri Hns Ancoaa Floor Gooseneck with steel / checker plate covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Drop sides 25 mm hollow aluminum profile, 400 mm high, front and side on gooseneck, pluggable Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle Hydraulic connection w

Condition: new, empty load weight: 12 kg, maximum load weight: 54,000 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 13,150 mm, loading space width: 2,950 mm, loading space height: 950 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2012, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be lifted, lifting + lowering, ABS (anti-lock braking system), can be extended to 3.50 m, lashing eyes, 2-part loading ramps, hydraulic ramps, twin tires approx. 8500mm loading length over axles, loading length over pins approx. 4650mm, 2-part hydraulic loading ramps 2500mm + 1500mm, can be extended to 3.5 m, rear axle load (kg) 48000 (3x 16,000kg), 18,000kg fifth wheel pressure for 3-semi-trailer tractor, ONLY FOR EXPORT, ONLY FOR EXPORT ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lasdpfsi Rnh Tsx Ancja - .

Condition: used, empty load weight: 7,800 kg, maximum load weight: 21,200 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 09/1968, loading space length: 12,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, leaf suspension, widenable to 3m, hydr. ramps, twin tires Body: Hydr. ramps Length over axles approx.: 8200mm, length over pivot: 3200mm ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Laodpoi Rnwwefx Ancea - .