Crushing unit

Brown-Lenox KUE-KEN 106

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E Djdpfxjyt Iawo Akvjkr stationary with magnet + 2 pairs of new shafts Machine is without gearbox.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg Dkjdpfx Aohp S Trokver - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Dsdey T Hbbspfx Akvskr

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Djdpexn A Spsfx Akvjkr with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: new, Year of construction: 2026, Blow bars, manganese, unit weight approx. 415 kg, available immediately - subject to prior sale. (Pegson Trakpactor 1412, Hazemag AP-PH 1412, MFL 130/130, Kleemann Reiner 132.....) Dedpfjuy N R Dsx Akvokr approx. 1325 x 360 x 115 mm

Condition: used, Thread drill Pilot and finishing tap R 1 3/4 inch Dodpfxsdk Rgxo Akvekr

Condition: used, lifting height: 5,020 mm, Year of construction: 2019, operating hours: 8,470 h, Year of manufacture: 2019 Empty weight: 8.300 kg Dodpfx Aoxg I Rbekvjkr Dimensions (LxBxH): 583 x 230 x 271 cm

Condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm Dkodpjfkzbdefx Akvor -Weight: 76 kg

Condition: good (used), Profile bending machine, bending machine, pipe bending tool Dedpfx Akogrzvgsvjkr -Handover: in the current condition as viewed -Accessories: 1 damaged pressing tool: 3/4", see photos -suitable for: pipe size 1/2" to 1 1/2" -Dimensions: 630/670/H440 mm -Weight: 36 kg

Condition: used, Year of construction: 2023, Soundproof enclosure Oil drain pump Three-way valve, connectionfor e Generator / Mecc Old ECP322M4B engineAGCOPower33 DTG Manual control Fuel tank 200L / Dkjdpfx Akerxur Ujvjr