FULLY AUTOM. INLINE M. FOR FOLDING BOXES

BOBST MIDLINE 924

Condition: used, Year of construction: 1975, max. printing speed sheets 8000 /h max. paper size 32 x 46 cm dampening system Aquatron Nedexu Nudepfx Ah Hjkt numbering unit incl N+P

Condition: good (used), Year of construction: 2018, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min COATED WEB BOPP 12 - 80 μ PETP 10 - 30 μ LDPE, LLDPE 30 - 200 μ OPA 12 - 18 μ NYLON CAST 30 - 80 μ Nkjdpju Upupjfx Ah Hot ALU (Foil) 6,3 - 40 μ PP CAST 60 - 150 μ PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ PETP 8 - 30 μ LDPE, LLDPE 20 - 200 μ OPA 12 - 18 μ NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 20 - 150 μ COEX FILM 25 - 200 μ PAPER 40 - 150 gr/m2

Condition: new, Year of construction: 2024, functionality: fully functional, 1290 is a professional laser cutter for serious manufacturing. It has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. And this model’s table has a lowering depth of 160 mm. You can give our managers a call for additional details! Wattsan 1290 Duos LT characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Nodpervimxefx Ah Hskt Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Nkodpfx Ajvwlqqjh Hst Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1979, impressions 46 Mio. max. printing speed sheets 12000 /h max. paper size 52 x 74 cm Nkodpfsx Emqmsx Ah Het dampening system Varn Kompac

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. Nkedpsu Umapsfx Ah Hot An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) Nkjdpfx Ahotvmq Ns Hst CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Nsdpfx Aswfq T Sjh Hskt Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 66000102, Pallet feeder, Vaculift, Vacubelt, DV Pump, MBO MPC Control, ASP 66 Shingle belt press delivery Machine nr: 66000102 Nksdpshqhgqsfx Ah Hjt

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Njdou Umbyspfx Ah Hekt Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.