Diesel Forklift

Bobcat D50 C-9/LSP 600

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, fuel type: diesel, empty load weight: 5,416 kg, total length: 4,540 mm, drive type: Diesel, Mast type: None Rodpfoxgkncex Ahcocf Technical condition: New Front tire type: Pneumatic Front tire size: 16/70-20 Rear tire type: Pneumatic Rear tire size: 12-16.5 CE certificate,

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Redjx Tgr Topfx Ahcjcf Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 220,000 km, power: 74 kW (100.61 HP), first registration: 10/2014, fuel type: diesel, overall weight: 2,370 kg, next inspection (TÜV): 04/2027, color: red, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: ABS, central locking, soot filter, * Maxi version * Heated seats * TÜV valid until 2027/4 Rsdpfoyvcxtjx Ahcjcf * Timing belt replaced at 144,000 km (11/2022) Special equipment: Rear parking assist, smoker’s package, heated seat front left Additional equipment: 6 speakers, passenger airbag, driver airbag, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors in vehicle color, 40 Ah battery, assistance system: brake assist, lockable glove compartment, rear wing doors without windows, body/construction: panel van, cargo partition wall, height-adjustable steering column (steering wheel), engine 1.6 L – 74 kW JTDM CAT, radio preparation, wheelbase 3105 mm, tire repair kit, low emission according to Euro 5 standard, reinforced disc brakes in front, right sliding door, side window in cargo/passenger area rear side panel (3rd row) covered, height-adjustable driver’s seat, steel wheels 6.5x16, 12V socket on dashboard, 12V socket in boot/cargo area, cargo compartment lining

Year of construction: 2000, condition: used, machine/vehicle number: 1660, Production line for sandwich panels / Lewecke loading gantry The following product was manufactured on this system (alternative products possible): Sandwich elements / sandwich panels with a polystyrene core, aluminum outer layer 0.5 - 0.8 mm thick, inner layer made of hardboard/plywood 1.8 - 2.3 mm thick. Maximum dimensions: 2500 mm x 8000 mm Maximum total thickness: 30 mm Maximum weight: 50 kg The production line consists of: 1. Conveyor belt 2. Roller press 3. Roller conveyor, infeed, panel turner 4. Roller conveyor, outfeed, panel turner Rcedpfoyztygex Ahcof 5. OMMA glue application machine (hot-melt), roller applicator HGS_H 327, year of manufacture 2020 6. Conveyor belt 7. Roller press 8. Gantry system + 2x staging areas for sheets / top layers, vacuum handling system L/W/H 20,000mm/8,000mm/4,000mm Alternatively, available together with a vertical panel buffer – see separate listing.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Rcodpfsvgh U Rox Ahcsf Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Condition: new, Year of construction: 2024, High-performance press brake AD-S 40400 from DURMA: A masterpiece of technology! The DURMA AD-S 40400 press brake combines precision, power and efficiency in a robust package designed specifically for demanding environments. This model not only offers outstanding performance and reliability, but also a wide range of high-quality standard features and options that make it an indispensable tool in your production. Technical data: ・Bending force: 400 tons ・Bending length: 4050 mm ・Clearance between the uprights: 3400 mm ・Rapid speed: 100 mm/s ・Working speed: 8 mm/s ・Return speed: 80 mm/s ・Motor power: 37 kW ・Weight: approx. 27,760 kg Features and benefits: ・Control: With the optional DELEM DA-66T touchscreen control for unsurpassed speed and ease of operation. ・Rugged construction: Reinforced frame for loads up to 200 tons ・Flexibility in use: With 2 support arms and a backgauge with two finger blocks and controlled X-axis for versatile applications. ・Advanced motor power: Equipped with AC servo motor for back gauge and ball screws, it provides fast and precise movements. ・Highly advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising on performance. Standard equipment: ・Y1, Y2, X (=650mm), R manual (2 stop fingers) ・Control DT 15 ・Manually adjustable F.AKAS II M CE safety system (on ram) (CE) ・CNC crowning ・Support arms with T-slot and spring-loaded folding stop, laterally adjustable on linear guide ・Durma tool system holder ・AC servo motor for backgauge and ball screws ・Shields at the side and rear Options: ・DELEM DA-66T touchscreen control for intuitive operation ・6 axes - Extended X/R/Z1/Z2 X=750 mm backgauge options ・Reinforced frame, designed for a load of 200 tons per 1 meter, total pressing force is maximum 400 tons Price information: ・The price quoted is for the machine only. Tools and freight costs are not included. Rcedpfx Ahjrwniqjcsf

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Rcjdpfx Aewg E Rbjhcof

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Rjdsu Nvmqopfx Ahcocf Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Distance between frames: 3600 mm Stroke: 265 mm Rjdpsyrdgqofx Ahcocf Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Dimensions: 5200 x 1900 mm Height: 2930 mm Weight: 12,750 kg

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Rcodpfx Ajydpmgohcjf Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.