Aggregate

BIESSE

Condition: used, machine/vehicle number: 008374, Max. panel width: 1000 mm Nwedpfx Aheyng Amjvjc Max. panel length: 2500 mm

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Nwedeyng Agspfx Ahvoc Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 80 mm No of Grippers: 8 Nwsdpfx Aoyngy Sjhvjc

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Nwodpfsv R Nk Uex Ahvjc Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, The BIESSE SAND REGAL 1350 is an industrial wide belt sander designed for calibration and fine sanding of flat components in the furniture and panel production industries. The REGAL series represents a robust production solution suitable for medium to high production volumes. Nedpfxjynb Rfs Ahvowc The machine features a modular design, allowing for a combination of calibration and finishing operations in a single pass, which significantly increases productivity.

Condition: used, machine/vehicle number: 008172, X axis working area: 6200 mm Nwodpfx Ahex A Tbqevjc Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area 2,893 x 950 mm Nsdpfx Ahoymmr Eovswc 6 traverses with 12 suction cups Milling spindle with ISO 30 tool holder, 3.6 kW, Drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, 6-position tool changer. Control unit N500 Color display Total connected load: 10 kW 400 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2010, number of axes: 5, This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. • Working Area: X=4600 mm, Y=1935 mm, Z=275 mm • Travel Speed: X-axis: 100 m/min, Y-axis: 100 m/min, Z-axis: 30 m/min • Vertical Spindles: 25 Njdpjx Tka Uefx Ahvswc • Horizontal Spindles: 6 • Tool Changer: Revolver type with 8 positions, Chain changer • 5-axis Electric Spindle: 11 kW HSK F63 • Installed Power: 35.7 kW

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails Nwedpfxex D H Hcs Ahvsc • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003524 - Manufacturer code: 2420A0716 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer refurbishment service, please contact us. 1.5KG 36X26X21 Nwjdpfx Asymfgbshvjc