Miscellaneous

Berg & Schmid Toggle press for beech corners

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Ibsdev Sq S Nspfx Abnja Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Ibsdjfv Avvspfx Abnoa Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Ibjdpfxsmcw S Ss Abnoa Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm Ibedefv Av Iepfx Abnoa weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, pressure 100 t stroke 400 mm Ibedpjyv N Ngefx Abnea 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm total power requirement 6 kW Ibodpfxoyv Ntfs Abnja weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Ijdpfxehtq Dvs Abnjba Engine: 45 kW Capacity: 6.5 m³/min

Condition: used, Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104-1 Isdpfxoxlu E Ao Abneba Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, pressure 500 kN Isdpfx Ajf Nb Exjbnoba stroke 40 mm throat 73 mm Working height from to 60 - 150 mm table surface area 115 x 70 mm weight of the machine ca. 10 Kg .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BBM40MAN Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40MAN hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40MAN ensures high-quality performance while remaining simple to operate. Key Advantages Precise drilling for furniture hinges – The adjustable depth stop located at the rear of the machine allows drilling with full parameter control, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) provides comfort and safety during operation. Powerful 1.1 kW motor – A uniquely strong motor compared with competing machines, providing the necessary torque to work with Blum-type hinges and other hardware systems. Three working spindles – Enable simultaneous drilling of the main hinge cup hole and the side pilot holes. Construction and Technology The CORMAK BBM40MAN hinge boring machine is designed for simplicity, durability, and ease of use. A mechanical feed of the working head with a 110 mm range and manual control ensures full control of the working cycle. The 10 mm tool shank diameter allows the use of standard hinge-boring bits. Compact overall dimensions (370 × 500 × 600 mm) and a weight of 21.5 kg make this hinge boring machine ideal also for on-site assembly work. Precision and Work Efficiency With an optimally selected spindle speed (3000 rpm) and the ability to manually adjust the settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth allows easy adaptation to different front thicknesses and hinge systems. Stable workpiece clamping and full parameter control minimize assembly errors and increase overall process efficiency. Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, carpentry workshops and maintenance departments, service companies specializing in hardware installation, woodworking schools and training centers. Standard Equipment 3-spindle hinge boring head, mechanical fence feed (110 mm), adjustable depth stop, 350 × 300 mm worktable, powerful 1.1 kW motor (230 V), manual control and workpiece clamping, 35 mm cutter + two 2 mm bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 350 × 300 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Ijdpoxzdicsfx Abnoba Max. drilling depth 10 mm Speed 2800 rpm Workpiece clamping manual Control manual Motor 1.1 kW Power supply 230 V Overall dimensions 370 × 500 × 600 mm Weight 21.5 kg