Measurement system

Beko Leak Detector

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Ffedpfx Aaoiq Hxkj Eow Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm Fjdpfx Aaetvm Smo Ejfw MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: refurbished (used), Available rubber testing equipment 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) Ffsdpfxjwmnlho Aa Eew The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: used, Hardness tester, hardness measuring machine, hardness tester, impact hardness tester Ffsdpfx Aajhck U So Ejw -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Condition: used, Year of construction: 1957, brinell hardness 250 kg rockwell hardness 150 kg throat 130 mm checking height 300 mm weight of the machine ca. 0,150 t dimensions of the machine ca. 650 x 530 x 1550 m Ffedpsu T R Tkofx Aa Ejw Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: used, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx, designed for professional metal and alloy analysis. The instrument is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, and various non-ferrous alloys. This is a proven industrial device, commonly used in foundries, laboratories, and for quality assurance. Device and Maintenance Information: - The device has been covered by a maintenance contract and maintained professionally on a regular basis. - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operates without a vacuum pump – flushing is performed exclusively with argon. Regularly calibrated programs: - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of installed programs: - Fe-01-M / Fe-10 – low alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – free-cutting steel - Al-01-M / Al-10 – pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Details: - Device type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption (operation): approx. 400 VA - Power consumption (standby): approx. 180 VA - Fuse: 16 A (slow-blow) Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Stand-by: approx. 6 l/h - Continuous operation: approx. 23 l/h - Analysis operation: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Relative humidity: 20–80%, non-condensing Dimensions & Weight: - Size (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Important Note: The table shown in the photos is not included in the sale. Condition: Used Scope of delivery (see images): - SPECTRO MAXx spectrometer Ffsdpfx Aajybcfke Esw - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Subject to change and errors in technical data. For further questions, we are happy to assist you by phone.

Year of construction: 2000, condition: good (used), Residual Oxygen Meter for checking the gas content in insulating glass. Dimension: Width: 245mm, depth: 185mm, height: 95mm, Weight: about 3kg Fsdeht Evpepfx Aa Eefw

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Fjdpfxouuarys Aa Esfw

Year of construction: 2021, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SK01USCY0060, Fully functional 3D scanner. Ideal for reverse engineering. Incl. software dongle. Fodpfx Aoxvxupsa Ejfw

Condition: good (used), Hardness tester functional Ffsdpjydlf Ssfx Aa Eow