Sideloader

Baumann HX30-12-40

Year of construction: 1969, condition: used, Swivel bending machine Albert steel TYpABK 400 /5 Djdpfx Aboh Rkh De Tocr useful length 2530 mm Sheet thickness 5 mm

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Dsdsfzb Niepfx Ab Tocr Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Year of construction: 2025, RLA 400 VIBER Power 11300 m3 Capacity ~ 11,300 m3/h Motor power 11 kW / 15 HP Rotation speed 3000 rpm Suction speed 32 m/s Diameter of the extraction spigot 355 mm Polyester filter material Filter permeability 5 microns Djdpslkd Tfsfx Ab Tecr Filter size 160 x 935 mm Number of filters 58 Chip container size 500 x 500 x 600 mm - 3 pieces Voltage 380V Dimensions 1000 x 3000 x 2300 mm Weight 630 kg Sound level 85 dB unconnected / 70 dB connected + 850 euros for the models with fire extinguisher (Safe System) + 1350 euros for the models with inverter (speed control)

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters. Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process. Series SL Power Electricity Forced air circulation Two-channel USB temperature recorder Number of temperature sensors MTS 2+ Wall insulation thickness (mm) 240 Ceiling insulation thickness (mm) 300 Dedofy T H Iopfx Ab Tscr Number of programs 20 Max. Number of steps in the program 10 Average heating time up to 180 ° C 40min 35min 25min 25min 20min Number of door leaves 2 Diagnostics / update via the internet Media consumption meter Stainless steel ceiling elements Direct heating Explosionproof closures Silicone door seal Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff. ThPID was created to offset the effect of inertia called hysteresis. The standard solution is based on a circuit that on / off heats with constant power. ThPID is a system in which, by adjusting the voltage at the setpoint temperature, the heating power that is currently needed is selected - minimizing the effect of temperature fluctuations. The ThPID system further allows the heating power of the furnace to be cut to a specified percentage, for example in the absence of power at the moment.The MTS is designed to provide realistic reading of the temperature of the oven. The standard measurement is based on a temperature measurement which is often wrong. MTS is a system of multiple sensors localized in the extreme places of the chamber.

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, unit was well maintained Dcsdpfx Aeh Et E Nsb Ter Rest see pictures

Condition: new, functionality: fully functional, Year of construction: 2025, Box Type Electrostatic Powder Coating Oven: Length: 500cm, Width: 250cm, Height: 300cm - Powder Coating Booth with Filter: Length:300cm, Width:220cm, Height:270cm - Electrostatic Powder Coating Equipment: Model: HMK MULTICOLOR, Type of Use: Manual Dcsdpfev Nvndsx Ab Tsr

Condition: good (used), Industrial Robots Manufacturer: Kuka Dcodpfx Astuc U Rjb Tjr Model: KR6, KR6-2, KR6arc Model: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F All models with KRC2ed05 controller Kuka KR6 KRC2ed05 Year of manufacture 2006 Kuka KR6-2 KRC2ed05 Year of manufacture 2011 Kuka KR6arc KRC2ed05 Year of manufacture 2006-2007 = several in stock Kuka KR16L6 KRC2ed05 Year of manufacture 2009 Kuka KR16L6-2 KRC2ed05 Year of manufacture 2011 Kuka KR16 KRC2ed05 Year of manufacture 2007-2009 = several in stock Kuka KR16-2 KRC2ed05 Year of manufacture 2010-2012 = several in stock Kuka KR16-2 Speed KRC2ed05 Year of manufacture 2012 = several in stock Kuka KR16-2 Foundry KRC2ed05 Year of manufacture 2012

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Dodepm U U Nspfx Ab Tocr Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Dcjdpoxpw Rvsfx Ab Tjr Haas TR210 5 axis trunnion table

Condition: used, Year of construction: 1999, Press force 230 t Bending length 3060 mm Distance between uprights 2690 mm Stroke 365 mm Control DELEM DA 66 T Distance between posts 2690 mm Dodpfswn Efuox Ab Tjcr Dimensions 3660 x 2310 x 3100 mm Machine weight approx. 17,700 kg Equipment: - 2-hand foot switch - Side safety doors - Safety door behind the machine - Control renewed in Delem DA 66 T