Unloader Unloader

Baumann BA 3

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Cedpfx Aijyxgyho Neha Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Chjdpjg Ezarsfx Ai Nsa Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Csdedtr A Topfx Ai Nsha Inspected and tested.

Year of construction: 1988, condition: used, 480 x 325 mm; Chodpfsbnczbox Ai Nja 14,000 units/hour; 7 stations 6 feeders 279 Card gluing unit 1 folding feeder 1529 Stapling station 300 Trimmer

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor, NEW Specifications: • Condition – new • Manufacturer – Atlas Copco • Capacity – 984 l/min • Main motor power – 7.5 kW • Tank – 500 l • Maximum working pressure – 10.0 atm Cedpfxohkttpe Ai Noha • Built-in refrigerant dryer • Electronic adjustment of compressor operating parameters • Soundproofed enclosure (only 67 dB) • Complies with CE standards • Operating manual in Polish • Weight – 227 kg Additional information: • Manufacturer’s warranty available after commissioning by an authorized Atlas Copco service center • Available within 7 working days

Condition: used, Year of construction: 2007, HEIDELBERG STAHLFOLDER KH78 with pallet feeder Csdpfewpgnaox Ai Neha 6 pockets + knife + side pocket + knife + independent knife unit as well as upright sheet delivery.

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 Chedpfjd E Np Ejx Ai Nja 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: used, Three knife trimmer semi automatic Chodpfx Aodix Ntji Nea Input height max 460 x 360 mm

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Codpfskkiwxjx Ai Neha

Condition: ready for operation (used), Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Size untrimmed without lap max 440 x 290 mm Size trimmed with lap max 470 x 300 mm Size trimmed without lap max 430 x 295 mm min 148 x 75 mm Speed max 10.000 c/h Equipment Chodpfx Aisd Ir Izo Noa stitching unit • stitching unit 321 • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 890 knives • 2 sets of knives