Pile turner

Baumann BSW3-1000 Automatic Pile Turner

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Iedpfxsv Ipl To Ahvotd

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Itedpfet Rmhasx Ahvod Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Iedpfx Aot N R Nrshvjtd Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: used, Year of construction: 1994, functionality: fully functional, Used condition. Iodpfx Ajxbpxijhvotd

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5033977, cutting width (max.): 5,500 mm, insertion depth: 5,700 mm, Equipment: compressor, High-performance and accurate hydraulic cutter - for small and medium-sized printing houses, bookbinders, and digital printers. Equipped with programmable control, designed for small-volume orders that change frequently. Control: Option to save programs in memory Data entry via decimal keyboard Electronic digital display with 1/10 mm accuracy Electronic handwheel with gradual adjustment of rear stop speed Machine diagnostics with error indicator on display Program start with "start" button Itjdpfoxm Tu Ssx Ahvjd switching between mm and inches hydraulic drive of the cutter and pressure holder Photocells side tables air table foot pedal for pressure measurement safety guards on the rear table

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: they are suitable for any format and are used for food packaged in cans, jars and other flexible materials. AUTOCLAVE CHARACTERISTICS: - Incorporates sterilization system by means of recirculating water with heating and cooling. - Water distribution by spray. - 1 bayonet-type quick-closing door with adjustment sensors and safety lock. - Thermal insulation of 60 mm thick fiberglass blanket covered with stainless steel. -Brand new MICROPROCESSOR. - Capacity of 100 programs in memory with output for PC connection. - Safety devices for all the functions of the autoclave with acoustic warning. - Inner conveyor for entry and exit of the autoclave baskets. AUTOMATIC CHARACTERISTICS: - PC connection available. - Remote control available. - Temperature/time available or with Fo. - Incorporates product probes. EXCHANGER CHARACTERISTICS: - Brand: ALFA-LAVAL Iodpswndyksfx Ahvotd INSULATION CHARACTERISTICS: - 60 mm thick glass fiber. - Fully coated in mirror-polished stainless steel. Internal diameter: 1.40 mm AUTOCLAVE CHARACTERISTICS: - Incorporates a sterilization system using recirculating water with heating and cooling. - Water distribution via spray. - 1 quick-closing bayonet-type door with adjustment sensors and safety lock. - Thermal insulation made of 60 mm thick fiberglass blanket covered with stainless steel. - Brand new MICROPROCESSOR. - 100-program memory capacity with PC connection. - Safety features for all autoclave functions with an audible alarm. - Internal basket inlet and outlet conveyor. AUTOMATIC SYSTEM FEATURES: - PC connection available. - Remote control available. - Temperature/time or Fo available. - Product probes included. EXCHANGER FEATURES: - Brand: ALFA-LAVAL INSULATOR FEATURES: - 60 mm thick fiberglass - Fully coated in mirror-polished stainless steel. Internal diameter: 1.40 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, functionality: fully functional, machine/vehicle number: 221240, screw diameter: 40 mm, injection weight: 172 g, Here we offer, as a dealer in injection moulding machines, the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with equipment for vertical injection Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition: very well maintained Extras: - Device for vertical injection - 1 core pull circuit - Additional heating band connection - 5 freely adjustable manual cooling circuits - Air valve connection controllable via Selogica - Equipment packages: quality assurance, documentation, extended monitoring, production control, etc. - Flexible part chute - Screw highly wear-resistant - CF drive Itjdewg Tt Repfx Ahved - Complete documentation and software (on CF card) - German language - Single ownership – origin Germany - Regular maintenance by the manufacturer and previous owner Injection unit: Screw diameter: 40 mm Shot weight: 172 g/PS Injection pressure: 1,530 bar Shot volume: 188 ccm Clamping unit: Clamping force: 70 t / 700 kN Tie bar spacing: 370 x 370 mm Mounting plates: 510 x 510 mm Tool installation height: 200 mm Max. platen distance: 600 mm Ejector stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 15 kW Heating capacity: 7.7 kW – 5 zones Total connected load: 23 kW Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery within Germany (shipping costs apply) Immediately available ex our warehouse in Hanover, Germany Further images to follow Information regarding our machines and company: - We only sell machines which we have acquired from active production, available at our warehouse in Hanover - All offered machines are inspected and tested prior to dismantling - We do NOT sell insolvency goods and we are NOT brokers dealing in third-party property - All offered machines come from successful companies where maintenance and care are understood as a matter of course - All machines offered are available for inspection at our warehouse

Condition: used, Year of construction: 2007, Koppelbox für Falzmaschinen - Coupling Box for Folding Machines Heidelberg DCT-MCT-DCTYear 2007 - Serial-No. 0-01828 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Iedpfxoh Axzae Ahvjtd On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2008, operating hours: 67,848 h, clamping force: 700 kN, screw diameter: 35 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, Injection molding machine Arburg 370S-700-290 Product Code: 232 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 132 g Clamping Force: 700 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 370x370 mm Platen size: 510x510 mm Mould height min.: 200 mm Total day-light max: 600 mm Itjdpfx Ahevwcbgevod Type of controls: Selogica Language: German Power: 23,9 kW Workinghours: 67848 h Weight: 3300 kg Dimensions: 3,8x1,5 m Hopper: No Euromap: Yes Air valve: Yes

Condition: good (used), Busch SE 125 (175) Pile turner This machine is like new, fully functional, and ready to use. Manufactured in 2017. This turner is from the German manufacturer Busch. This is the current model in production. Extended stack height to 175 cm. Technical specifications: Format: 1250 x 900 mm Stack height: 1750 mm Load capacity: 1200 kg Device weight: 1000 kg 380 V power supply Itsdpfx Ajyi A Uuohved Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.