Three-phase synchronous motor

Baumüller SEW DSOG 100-S

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Djdjdkdi Tepfx Aahokp Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Dkodewxmb Eopfx Aahep Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm y-travel: 1000 mm z-travel: 750 mm Dedsvptmwopfx Aahjkp table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders *

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz Dedpfx Aascdi D Dehekp temperature: max. 750°C

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Djdpfxjxf Iamj Aahskp Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION Dkedpfencfd Rox Aahsp System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Dkodpfoxl S Uhex Aahjp

Condition: excellent (used), SK 50 holders (28627) Various manufacturers: Bilz Kelch Dksdpfxswl U Tco Aahjp Sandvik Clarkson Approx. 90 pieces

Condition: used, Year of construction: 1976, turning diameter over bed 600 mm turning diameter over slide rest 400 mm turning length 1000 mm turning diameter in the gap 850 mm turning speeds 15 - 810 U/min centre height 300 mm spindle bore 56 mm total power requirement 9,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 Djdpow Tdxcofx Aahokp - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Djdpfxowzvl Se Aahjkp - Capacity: up to 16,000 bph (based on 1.5L PET bottles) - Formats: 1.5L PET bottles (short neck and lid) - Bottle material: PET - Type of filler: Isobaric filler - Year of manufacture: between 1999 and 2007 (various machines) - Cap type: short neck - Type of label: OPP (Contiroll) Scope of Delivery  - 1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler - Air conveyors from blowing to labeler & filler - 1 x Labeler CONTIROLL | Krones | 2000 - 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector - 1 x Mixer for carbonated water and drinks | ca. 2000 - 1 x Inkjet printer HITACHI RXS - Conveyors between filler and tunnel - 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min - 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min - Transport of packages to palletizer - 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 - Pallet feeder with lift and transport - 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002