Double-sided cantilever rack

Bartels L12

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. - Abrasive belt unit (self-calibrating) Dcodpfx Aksxw Ih Ujcsg - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Dcedpewbuzfefx Akceg

Condition: new, Year of construction: 2025, machine/vehicle number: 947526697, Frumecar ECA 500 fully mobile concrete batching plant production capacity: 30 m³/h * 4 aggregate hoppers * vertical axle mixer TRH-750 with a capacity of 750 liters Dcsdpohd I Sqsfx Akceg * plant don't need any foundation and could be assembled in 1 day * 1 year guarantee from startup * ask for specific offer and technical details more machines and mixing plants on our website more information Application: Building industry, Applicable material: Concrete, General

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Dcedpfx Ajwt A Ecekceg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 33,318 h, pressing force: 87 t, total width: 1,800 mm, total height: 2,840 mm, overall weight: 8,300 kg, controller manufacturer: TRUMPF, controller model: TASC 6000, product length (max.): 3,020 mm, number of axes: 6, This 6s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details. • Operating hours: Machine 33,318 h; Hydraulics 15,786 h • Clearance: 1,750 mm • Usable installation height: 385 mm (optional increased: 615 mm) • Throat depth: 420 mm • Operating interface: Touchpoint TruBend • Max. Y-axis speed (operating step, optional): 25 mm/s Dcedoyhp Edepfx Akceg Technical Specification Bending Length 2210 mm

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Material quality: Steel and Pre-painted Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Djdpfxswvhnhe Akcjcg Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min Dcjdpotqf Rzefx Akcog X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: Dsdpfx Akeh Ek Daococg - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 1999, condition: used, ja VDI 20 number 3 Stück im Paket +++++ Dcjdjhr Sv Topfx Akceg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, functionality: fully functional, Year of construction: 2018, TRUMATIC 6000 FIBER (K06) LARGE FORMAT + SHEETMASTER + GRIPMASTER Year of manufacture: 2018 Laserpower: 3kW fiber Additional functions, MACHINE: Punching quality package Forming package MultiTool function Engraving function SoftPunch function Die spray lubrication with level monitoring Dsdpeyambaefx Akcjcg Descending die Integrated flattening function Smart punch monitoring Additional clamp 1 pc Individually opening clamp 4 pc Repositioning cylinder Vibration damping Brush tables with loading and unloading aid Warped sheet detection Wireless Operation Point MDA interface Additional functions, SHEETMASTER: SheetMaster 3000 x 1500 mm (AK04) Loading station with fanning magnet Unloading platform Loading and unloading parallel to production Peeling system including positioning aid for large-sized sheets Additional positioning aids for medium-sized sheets Additional positioning aid for small-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Additional functions, GRIPMASTER: GripMaster 3000 x 1500 mm Parts conveyor belt for punch & laser side