Second-hand machinery for sale (2,359)

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, The S2-900 provides exceptional dispensing accuracy and repeatability, and is ideal for high-volume manufacturing. The S2-900 dispenses precise small dots and consistent thin lines, coats and underfills in hard-to-reach areas, has a small footprint that maximizes floor-space, and increases throughput. The S2-900 performs with a wide range of fluids, processes, and substrates and easily integrates with jets and valves from Nordson ASYMTEK. Manual available upon request Note - 1. This is a pair of units with a custom conveyor system used to transfer cartridges between 2 systems. 2. 1 Used and 1 unused pair available 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer Dusb Ex Devm E Nrs Eket Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: refurbished (used), Year of construction: 2003, operating hours: 24,000 h, Functionality: limited functionality, bending radius: 300 mm, bending angle: 183 °, wall thickness: 8 mm, pipe diameter: 100 mm, pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR Dusb Ex D Ejtrd T Tekjt 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, Year of construction: 2003, grinding wheel diameter: 400 mm, helix angle: 45 °, Used Höfler Rapid 1500, built in 2003 Mahr measuring system Interlit oil preparation system Dsb Exev U D Tfs D Ekjut Location: Australia

Condition: ready for operation (used), Year of construction: 2013, Control Unit Brand SIEMENS Main Drive Spindle speed range 14000 rpm Dsb Esvl I S Tsx D Ekjut Number of axis 5 Movement X-Axis Movement 650mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm C-Axis Movement 360º This 5-axis DMG Mori Seiki LaserTech 65 was manufactured in 2013. A universal machining centre featuring a spindle speed of 14,000 rpm, SIEMENS control, and a travel range of 735 mm x 650 mm x 560 mm. It offers a full rotation range on the C-axis and a swiveling range on the A-axis of +120°/-120°. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki LaserTech 65 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2010, Distance spindle nose and table - 125 - 725 mm X-travel - 1100 mm Y-travel - 650 mm Z-travel - 600 mm Control 18i-MB Fanuc Max. rpm - 15.000 min/-1 Main spindel - 18,5 / 22 kW Torque - 150 Nm Dusb Ex D Ejv At Tdjkot Tool taper - BT-40 Table surface area - 1300 x 650 mm Max. table load - 1100 kg T-slots - 5x T-slot distance - 125 mm

Condition: used, Year of construction: 2012, CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 1400 run hours ! Available immediately. Deb Exoc S S Spj D Ekeut

Condition: as good as new (ex-display), Year of construction: 2020, Modular high throughput printing device with environmental control (single cell only) with 4 liquid channels with the ability to scale to 8 liquid channels that deliver reagents ability to deliver 10pl to 800pl in a single drop depending on the Piezo dispense capillary (consumable) used. The unit offers consistent and highly reproducible reagent delivery with a mechanical precision of the gantry movement is less than 3 µm, and the spot positioning accuracy is typically less than 6 µm. Dueb Eevmktpsx D Ekot Notes - 1. Scienion will be needed to complete setup/programming IP of resonators still on the equipment (find resonator image) 2. 2 Units available for sale - 1 used; 1 unused 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, drum coater, mixing tank, control system. 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more. Dueb Eewhx Txjx D Ekot

Condition: used, Year of construction: 2002, TOSHIBA-SHIBAURA MPC-2500 Dsb Ex D Eswicyfjkeut Y.O.M=2002 TABLE: 2,000×6,400 C TO C: 2600 HEIGHT : 1800 TRAVEL : 2600× 6500 FANUC-18imb. ATC-60EA AUTO ANGLE HEAD 3EA CHIP CONVEYOR(LIFT UP BOTH SIDE)

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, ANCA MX7 LINEAR Year: 2016 Type: CNC Tool & Cutter Grinder Specifications: Max Tool Diameter: 7.8″ (200 mm) Max Tool Length: 12″ (305 mm) Max Tool Weight: 44 lbs (20 kg) Travel (X/Y/Z): 21.1″ / 16.1″ / 8.4″ C-Axis Rotation: 264° A-Axis Rotation: 360° Grinding Wheel Size: 8″ x 1.25″ Spindle Power: 51 HP Spindle Speed: 10,000 RPM Equipped With: ANCA AMC5 G2 High Performance CNC Control Dob Ex Dewh Iv As Eksut Renishaw Probe System EBBCO Package Filtration System

Condition: good (used), Year of construction: 2020, X-axis(mm) - 1020 Y-axis(mm) - 520 Z-axis(mm) - 640 Distance from spindle nose to table surface(mm) - 100-740 Distance from spindle center to the track surface of Z-axis(mm) - 580(*550) Table Dimension(mm) - 1150X520 Max. loading capacity(kgs) - 600 Rapid travel rate(X/Y/Z)(m/min) - 36/36/36 (*48/48/48) Width(mm) - 2600 Dsbowhwtke Ex D Ekout Length(mm) - 2800 Height(mm) - 2890 Net weight(kgs) - 5500 CNC Controller - Fanuc Oi-MF Plus

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,572 h, General Data Machine weight 5000 Main Drive Spindle speed range 1000 Additional Equipment Cucchi Giovanni DBM.821 (2009) loader included This Schütte SG18 multi-spindle turning machine was manufactured in 2009. It features a largest rod diameter of 18mm, spindle circle diameter of 180mm, and bar feed of 60mm. Includes a Cucchi Giovanni DBM.821 loader. With a total weight of approximately 5000kg and a spindle speed max of 1000 1/min, the Schütte SG18 machine we have for sale is robust. Contact us for further details regarding this multi-spindle turning machine. Application Types Turning Dueb Ex D Ejwb Ilwokjt

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, Functionality: limited functionality, machine/vehicle number: 3201, total length: 3,251 mm, total height: 1,626 mm, total width: 1,168 mm, overall weight: 1,200 kg, The Fuji FW3400CXII/B horizontal flow wrapper is an advanced packaging machine designed for efficient and high-speed wrapping of various products. It uses a single roll of film to encase products, with top film feed and adjustable formers for flexibility. The machine features induction heated sealing rollers for precise temperature control and energy efficiency, along with box-motion end sealers to accommodate a range of product sizes. Capable of up to 300 packs per minute, it ensures consistent, reliable packaging with easy operation via a user-friendly HMI. Ideal for food, pharmaceutical, and other industries, it provides robust, hygienic wrapping solutions. Manual available upon request. Duob Ex Dovmcghj Eket Note - Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Duob Ex Dou Eviws Eket Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Edgebanders STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm Dsb Eov Ehbbjx D Ekjut (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: good (used), Year of construction: 1991, Accessories: 1)Ladle 2)Sprayer Specifications: Locking Force: 650 tons Distance Between Tie Bars (W × H): 750 × 750 mm (29.5" × 29.5") Tie Bar Diameter: 160 mm (6.3") Stationary Platen (W × H): 480 × 1290 mm (18.9" × 50.8") Movable Platen (W × H): 480 × 1200 mm (18.9" × 47.2") Back Platen (W × H): 650 × 1200 mm (25.6" × 47.2") Die Height (Min-Max): 350 - 900 mm (13.8" - 35.4") Dujb Exoum Rd De D Eket Die Stroke: 550 mm (21.7") Die Injection Force (Min-Max): 25 - 52 tons Injection Speed: 0.1 - 5 m/sec (3.9 inch) Shot Position (below center): 0 - 175 mm (0" - 6.9") Plunger Stroke: 500 mm (19.7") Plunger Tip Diameter: 75 - 95 mm (3" - 3.7") Ejection Force: 25 tons Ejection Stroke: 125 - 0 mm (4.9" - 0") Dry Cycle Speed (max, load): 4.5 sec

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, 6-axis articulated Robot & Controller - 9 units available Max Reach: 650mm Max Payload: 5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Dusb Esvzv N Ejx D Ekot Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Dsbou Evkhs Ex D Eksut

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Feed radial axis from - to 1 - 3750 mm/min Dusbovfwuqo Ex D Ekst angle adjustable from - to - 0,5 / + 0,5 Grad Accessories: - Various tool holders - Various clamping devices - Documentation

Condition: good (used), Year of construction: 2006, X Axis Travel: 850 mm Y Axis Travel: 550 mm Z Axis Travel: 580 mm Deb Eewhcxfox D Ekjut Distance from Table Surface to Spindle Nose: 120–700 mm Table Area: 1020 × 550 mm Max. Load of Table: 600 kg Fanuc : Oi-MC

Condition: good (used), Year of construction: 2019, operating hours: 1,960 h, machine/vehicle number: 594-02462, 4-axis Scara Robot & Controller Max Reach: 600mm Max Payload: 5.5kg Voltage: 1Phase 200-240VAC Frequency: 50/60Hz Dusb Exevzv Hqj D Eket Max Current: 10Amp Short Circuit Rating: 1.5kA Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual Dusb Exoul Efme D Eket knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 1994, MAX TURNING DIAMETER-340MM MAX TURNING LENGTH-530MM Dueb Exourqm Ne D Ekot SWING-520MM DISTANCE BETWEEN CENTERS-625MM CHUCK EQUIPPED-200MM GUIDEWAYS-BOX MAX ROTATION SPEED-3500 RPM SPINDLE NOSE-A2-6 SPINDLE BORE-78MM TAILSTOCK-YES

Year of construction: 2020, operating hours: 1,960 h, Condition: good (used), Functionality: limited functionality, Precision Weighing Modules - 22 units available Max Capacity: 220g Readability: 0.1mg Deb Ex D Eovzl A Uskout Interface: EtherNet/IP, TCP/IP Dimensions(LxHxW): 200mm x 100mm x 25mm Power: Power Over Ethernet Configuration Software: APW-Link Version2.7.2 Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, Functionality: limited functionality, machine/vehicle number: P10642-A, Enmin electromagnetic vibratory bowl feeder - 2 units available Voltage: 1Phase 240VAC Frequency: 50Hz Full load current: 2Amp Deb Ex D Eovzlu Dokout Note - Price mentioned is Ex works. Any expenditures incurred for packaging, handling and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.