Second-hand machinery for sale (2,359)

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, Moving column machine - ideal for automatic loading TECHNICAL DETAILS Control: Siemens 840D sl Sinumerik Grinding range: Module 0.1 - 22 / cut and special profiles, special pitches Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 rpm Grinding wheel holder: 100 mm H5 Programmable cutting speed: constant 10-80 m/s Grinding wheel: ceramic or resin-bonded Grinding wheel width: max. 101 mm Grinding wheel diameter: 210 - 400 mm Bore diameter of grinding wheel: 152.4 mm (6 inches) Dujlq Tifotwn Iijist X-axis (longitudinal): 2200 (2500) mm Y-axis (transverse): 500 mm Z-axis (vertical): 410 mm C-axis: ± 30° B-axis: ± 20° B2 axis: ± 20° U-axis: 105 mm W-axis: 125 mm Work table: 390 x 3,750 mm Table load: max. 4000 kg Feed speed X-axis: 21 m/min Feed speed Y-axis: 10 m/min Feed speed Z-axis: 6 m/min Feed speed C-axis: 2 m/min Feed rate B-axis: 6 m/min Feed rate U-axis: 4 m/min Feed rate W-axis: 4 m/min Feed rate B2 axis: 6 m/min MACHINE DETAILS Weight: 20,000 kg Space requirement: approx. 5,200 x 3,000 x 2,600 mm Coolant system: approx. 4,000 l, with integrated deep-bed filter Total connected load: 100 kVA EQUIPMENT - Hybrid clamping device / plates - Complete documentation

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2004, operating hours: 14,911 h, load capacity: 8,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: standard, construction height: 4,000 mm, fuel: electricity, TECHNICAL DETAILS Lifting height: 4,000 mm Fork carriage width: 2,000 mm Load capacity: 8,000 kg Load center of gravity: 600 mm Djlstwc Hmeq Tifisut Fork positioner: 425 / 1 960 mm Forks: 150 x 65 x 1 400 mm Motor: Electric Mast: Standard Battery: 80 V; 1 550 Ah; 2015 MACHINE DETAILS Tires: SE 8.25-15 Dimensions: 4,000 x 2,050 x 2,860 mm Mast height: 3,150 mm Weight: 12,174 kg EQUIPMENT - Sideshift - Cabin - Heater

Condition: good (used), Year of construction: 2008, operating hours: 25,662 h, Functionality: fully functional, machine/vehicle number: 17951, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) for 3-axis simultaneous machining X-axis travel: 660 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Speed range: 40 - 12,000 rpm B-axis: 360° Indexing increment: 0.001° Distance table surface - spindle nose: 80 to 680 mm Distance pallet surface - spindle center: 80 - 680 mm Djlq Tiotwcvzefijut Distance pallet table center - spindle head: 120 - 720 mm Pallet size: 500 x 500 mm max. table load: 400 kg Max. workpiece size: Ø 650 mm x 750 mm Table surface: 40 holes â M16 x 2 mm pitch Pallet change time: 7.5 s Pallet change time (pallet to pallet): 15 s Number of pallets: 2 Number of magazine positions: 120 Tool diameter: with full occupancy Ø90 mm Tool diameter: with free neighboring stations Ø150 mm Tool length: 350 mm Tool change time (tool weight < 5 kg): 1.3 s Tool change time (tool weight > 5 kg): 2 s Chip-to-chip time (tool weight < 5 kg): 2.9 s Spindle holder with face contact: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Inner diameter of the spindle bearing: 80 mm Spindle motor power (30%/100% ED): 22 / 15 kW Max. Torque (FANUC motor): 187 Nm up to 1,120 rpm Rapid traverse X-, Y- and Z-axis: 50 m/min Feed X-, Y- and Z-axis: 1 - 50,000 mm/min Stepless manual feed: 0 - 4,000 mm/min Positioning accuracy over the entire X-, Y- and Z-axis travel: ± 0.006 mm Repeat accuracy X-, Y- and Z-axis: ± 0.001 mm Changeover accuracy of different pallets in Y-axis: 0.01 mm Repeat accuracy of pallet clamping in X, Y and Z direction: 0.003 mm Indexing accuracy: 5" Repeatability of indexing: ± 2" Torque on table with FANUC drive: 380 Nm MACHINE DETAILS Dimensions: 3,340 x 6,740 x 2,533 mm Machine weight: 7,500 kg Total connected load: 51 kVA Supply voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 400 l/min Axle guides: Roller guides Lubrication: permanent grease lubrication X-, Y- and Z-axis power: 5.5/5.5/4.5 kW Axial force X-, Y- and Z-axis: FANUC motor 9.1/5.0/6.0 kN Acceleration/deceleration: 0.7 G EQUIPMENT - Preparation for magazine with 240 slots - Optical measuring system - Renishaw NC4 - RENISHAW OMP 60 measuring probe (EASY PROBE SOFTWARE included) - Measuring probe - Chip conveyor - Knoll high-pressure system - Extraction unit

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, TECHNICAL DETAILS Dolqotwcpbo Tifijut Control: FANUC 32i turning diameter: 365 mm Bar diameter: max. 65 mm Speed: max. 5,000 1/min Bar loader: TOP-Automazioni XF 475 Bar length: max. 4,200 mm EQUIPMENT Turret with 12 stations (not driven) Tailstock Chip conveyor without air filter

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Tube laser cutting system for laser processing of steel, stainless steel and aluminum tubes TECHNICAL DETAILS Control: SIEMENS CNC control for 8 axes Round tube diameter: 12 - 140 mm Square tube: 12 x 12 - 120 x 120 mm Rectangular flat oval tube: 10 - 140 mm (110 mm maximum side difference in 170 mm diameter) Cutting head holder: Precitec AK-HP Bundle storage: automatic, for pipes with a length of 3200 to 6500 mm Loading capacity: 4000 kg Duolq Tstwby Sjifiot Loading equipment for sensitive tubes: up to 6500 mm Laser source: ROFIN SINAR DC 025 Compact Profibus, diffusion-cooled (Integration of the ROFIN SINAR DC 015-020-025 Compact laser source with the LT tube laser cutting system) Year of manufacture laser source: 2009 MACHINE DETAILS Operating voltage: 400 V/50 Hz Total power requirement: 26 kW Fuse protection: 100 kA Control voltage: 24 V Space requirement: 15 x 5 m Machine weight: 9000 kg EQUIPMENT - LT main system module - Shortened length version of the system layout - Support unloader main module - Unloading device main module with short parts conveyor, with plastic belt - Unloader additional module for unloading parts up to 3500 mm long on the front side and up to 3000 mm long on the rear side - Cooling unit with closed circuit and connection system for ROFIN DC 020-025 - Fine dust filter and extraction system - PRECITEC AK-HP focusing head (year of manufacture 2009) - PRECITEC AK-HP 3.75" exchangeable cassette - PRECITEC AK-HP 5" interchangeable cassette - High-pressure lens ZN-SE 3.75" - High-pressure lens ZN-SE 5" - Remote Diagnosis Host Software for remote diagnosis - Optical weld seam detection and pipe positioning device - Laser machine equipment for loading and cutting open profiles - (flat, L, C and U profiles) - Tubework LT 712 D, integrated parametric 3D CAD-CAM tube processing software - Tubework-LT 712 D post processor with X-Y function for cylindrical holes on round tubes - round tubes - Extraction system - Booster device for optimum laser grooving - Remote diagnosis package with 56 K modem and Remote Diagnosis Host software (Teleser remote diagnosis service) - PC software for determining cycle times, energy and cutting gas consumption - Set-up elements, base plates - Various spare parts - Lifting gear for loading the machine - Documentation

Condition: new, Year of construction: 2022, Functionality: fully functional, Year of manufacture of the machine was December 2022 - the manufacturer confirms that the warranty (on parts) is valid until December 2024 Machine still in OVP / original packaging! TECHNICAL DETAILS Control system: Sinumerik 840-sl/ OPERATE Swivel range over bed: Ø 430 mm Swivel range cross slide: Ø 300 mm Distance from main spindle to counter spindle: 720 mm Turning diameter: max. Ø 300 mm Workpiece length: max. 480 mm Bar passage: Ø 45 mm Travel paths Dolq Tiotwbx Ijfisut Travel X / X2: 160 / 150 mm Travel Z / Z2 / Z3: 510 / 510 / 510 mm Travel Y: +40 / -30 mm Main spindle Speed range: 0 - 7000 rpm Torque at the spindle: max. 100 Nm Spindle connection: DIN 55026 A2-5 Spindle bearing (front inside diameter): Ø 85 mm Spindle bore: Ø 53 mm Counter spindle Speed range: 0 - 7000 rpm Torque at the spindle: max. 100 Nm Spindle connection: DIN 55026 A2-5 Spindle bearing (front inside diameter): Ø 85 mm Spindle bore: Ø 53 mm C-axis Resolution: 0.001° Rapid traverse speed: 1000 rpm Spindle indexing (disk brake): 0.01° Drive power Main spindle: 15 kW Counter spindle: 15 kW Tool turret 1+2 Number of tool positions: 2 x 12 Tool holder according to VDI (DIN 69880): VDI 25 Shank diameter for boring bars: Ø 25 mm Turret indexing time: 0.2 sec Driven tools 1+2 Speed range: 0 - 6000 rpm Torque: 16 Nm Drive power: 4 kW Number of driven tools: 2 x 12 Feed drives Rapid traverse speed X / Y / Z: 30 / 15 / 45 m/min Feed force in the X-axis / Y-axis: 4000 N Feed force in the Z-axis: 5000 N Feed force in the counter spindle of the Z-axis: 6000 N MACHINE DETAILS Connected load: 30 kVA Supply pressure: 6 bar Height of the machine: 1985 mm Space required WxD without chip conveyor and coolant: 2680 × 1950 mm Occupied area WxD with chip conveyor and coolant: 3990 × 1950 mm Total weight of the machine: 4200 kg Transport dimensions: 2820 x 2150 x 2295 mm Transport weight with/without pallet: 4000 / 3700 kg EQUIPMENT chip conveyor Integrated coolant device Tank volume 300 l Coolant pumps for the tool turret 2 x 14 bar Flushing pumps for the work area 2 x 3.7 bar Hollow clamping cylinder on the main spindle Draw tube for the main and counter spindles Mechanical spindle brake Part ejector and flushing through the counter spindle

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,000 h, Functionality: fully functional, TECHNICAL DETAILS x-path: 1270 mm y-path: 610 mm z-travel: 760 mm Spindle holder: SK 50 Spindle speed: 8000 rpm Spindle motor: 20/30 kW Torque at the spindle: 306 / 458 Nm Pallet size: 1,320 x 620 mm Table load: 1350 kg Pallet worktable load capacity: 900 kg Feed speed: 1 - 40,000 mm/min Tool changing device: 24 pos. CNC control: iTNC 530 HEIDENHAIN Dolotwbpgjq Tifijut MACHINE DETAILS Total power requirement: 35 kVA Machine weight: 10 (8 + 2) t Space requirement: 3.5 x 2.4 x 3.1 m Weight of the machine: 8000 kg Switch-on time: approx. 83,000 h Operating time: approx. 22,000 h Pallet changer dimensions: 2010 x 1550 x 2217 mm Pallet changer weight: approx. 1100 kg Chip conveyor dimensions: 4020 x 670 x 1400 mm Chip conveyor weight: 250 kg Filter station dimensions: 1640 x 900 x 1055 mm Filter station weight: 280 kg Coolant tank dimensions: 2055 x 1005 x 500 mm Coolant tank weight: 210 kg EQUIPMENT - CNC vertical machining center with 2-fold pallet changer - IKZ (internal coolant supply) - ILZ (internal blowing air) - MMS (minimum quantity lubrication) - 3D probe HEIDENHAIN - Direct path measuring system - Tool measurement RENISHAW TS 27R - chip conveyor

Condition: good (used), Year of construction: 2019, Functionality: fully functional, TECHNICAL DETAILS Rolling diameter: 6-80 mm Width of the rolling tool: max. 150 mm Outer diameter of the rolling tool: max. 240 mm Center distance tool spindle - center: 190-240 mm Pitch size range (normal): 1-12 mm motor Rollers: 15 kw-6 Hydraulic: 5.5 kw-4 Cooling: 0. 125 kw Rolling force: max. 500 KN Spindle diameter: 85 mm Inclination angle of the spindle: +/- 10° Dolq Tjtwbkqjifiout Volatility: 380 V, 50 HZ, 3 phase MACHINE DETAILS Size of the basic machine: 2600 x 2100 x 1600 mm Size of the hydraulic station: 800 x 500 x 1250 mm Weight of the machine: 4500 kg Length of the workpiece: Unlimited

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, Punching, nibbling and forming with rotation of all tools HIGHLIGHTS Dujlq Tiotwbi Tsfist - Improved punching head (compared to the 500R series) - 360° rotation for all tools without tool size restrictions - Setup-friendly linear magazine - TRUMPF punching tools - ideas with a system: TRUMPF Multitool® - Pneumatic disposal flap + chute for small parts TECHNICAL DETAILS Working area: 2500 x 1250 mm Punching force: 220 kN Sheet thickness: 8 mm Workpiece weight: 200 kg Active hold-down device: 4.5 - 20 kN Control: Sinumerik 840 D Stroke sequence: 1200 1/min Marking stroke sequence: 2800 1/min Tool changer: 18 tools with 3 clamping claws Tool change time: 0.7 - 3 s Multitool: 5/10-fold Part size: 500 x 500 mm Positioning speed X / Y / simultaneous: 100 / 60 / 116 m/min Rotation axis: 360°/s through-rotation Rotation speed: 330 rpm Position deviations: ± 0.1 mm Position spread: ± 0.03 mm Acceleration X / Y: 20 / 10 m/s² Acceleration C-axis: 350 1/s² MACHINE DETAILS Space requirement: 13600 x 2,470 x 2,800 mm Weight: 17 tons Total power consumption: 29 kW Machine will be auctioned without tools

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: SI 2624, TECHNICAL DETAILS Duolq Tietwbctofiot Construction volume: 250 x 250 x 325 mm (height incl. construction platform) Coating travel distance: 550 mm Travel speed: 40 - 500 mm/s Coating speed: process-dependent Resistance temperature sensor: PT-100 4-wire sensor Electronic temperature controller: with error curve linearization, sensor break detection Max. Heating power: 950 W at 230 V Operating temperature: 35 - 200 °C, depending on the type of metal powder Oxygen content in the process chamber during operation: < 0.1 % Max. Argon consumption: 3 m³ at the start of the build process Average argon consumption during build operation: approx. 0.6 m³/h Emission sound pressure level of the machine:

Condition: used, Year of construction: 1999, Functionality: fully functional, TECHNICAL DETAILS Turning diameter: max. 250 mm turning length: max. 500 mm Control: Fanuc 18i Main spindle Spindle speed: max. 4,000 rpm Drive power - main spindle: 15 / 18.5 kW Max. Torque: 164 Nm C-axis: 0.001° Djlq Tifetvnvwsiout Bar diameter: max. 65 mm Chuck diameter: Standard 200 mm Spindle nose: A2-6 Counter spindle Spindle speed: max. 4,000 rpm Drive power - counter spindle: 7.5 / 11 kW Max. Torque: 98 Nm C-axis: 0.001° Bar diameter: max. 65 mm Chuck diameter: Standard 200 mm Spindle nose: A2-6 Traverse path counter spindle Z3: 500 mm Tool turret Number of turrets: 2 Number of tool stations: 2 x 12 Number of driven tool stations: 2 x 12 Speed range - driven tool stations: max. 4,000 rpm Max. Torque: 16 Nm Tool holder: VDI 30 Switching time: 0.14 s Travel distances x-axis 1+2: 200 mm y-axis: ± 55 mm z-axis 1+2+3: 500 mm Feed rates Rapid traverse ( X / Y / Z ): 20 / 7.5 / 30 m/min Resolution: 0.001 mm Total power requirement: 38 kW MACHINE DETAILS Machine weight: approx. 7.1 t Space requirement: approx. 7.0 x 2.5 x 2.6 m EQUIPMENT - documentation - without chip conveyor - Main and counter spindle - Tool drive - C-axis - Y-axis - 2 turrets - Interface for bar loader - Bar feeder FMB Turbo 10-72 (Ø45 / Ø50 mm bar diameter)

Condition: reconditioned (used), Year of construction: 2018, Functionality: fully functional, Material joining machine - for the production of double-sided adhesive tapes and other material joints The semi-automatic cutting machine is suitable for winding various types of coupled tapes - single-sided adhesive materials, foam and aluminum on plastic or cardboard cores Unwinding unit: Separate from the machine, with an intermediate aluminum platform for operator inspection. TECHNICAL DETAILS Width of the cylinder: 2600 mm Maximum material width: 2500 mm Diameter of the unwind shaft: 3" Maximum jumbo diameter: 1000 mm Diameter of the rewind shaft: 3" Duslq Tiotu U Iwofiet Maximum winding speed: 100 m/min Maximum winding diameter: 400 mm Brake: 4-caliper disk brake MACHINE DETAILS Overall dimensions: 4000 x 2000 x 400 mm Electrical connection: 400V 3P+N+T, 63A Connected load: 20 kW Compressed air: 6 bar, 5 l/min EQUIPMENT - Proportional brake for adjusting the winding tension - Winding turret with push-button rotation 2 pneumatic 3" winding shafts - 1 AC drive motor - 1 AC winding motor - Regulation of tension and line speed - Manual filling/emptying of the winding shafts - Preselection of meter counting with slowdown and stop

Year of construction: 2019, operating hours: 1,336 h, Condition: excellent (used), Functionality: fully functional, The DSP 205 screw press separates biogenic waste into a liquid and a solid fraction. The bioavailable components are enriched in the liquid phase and separated from packaging material and other impurities. HIGHLIGHTS - No pre-shredding, pre-classification or digestate processing necessary - Very clean filtrate due to gentle digestion in the mixing hopper - Insensitive to foreign bodies up to a space diagonal of approx. 80 mm - Lower energy consumption due to co-rotating press cone - Easy maintenance thanks to screwed-on wear segments - Easy access to the transfer point from hopper to press thanks to lockable, movable mixing hopper TECHNICAL DETAILS Material diameter: max. 80 mm Product output: 8 - 12 t/h Dry mass in the liquid phase: 16 - 23 % Liquid phase plastic impurities: 0.3% dm Volume capacity: 5 cbm Mixing shafts: 2 pieces Power: 2 x 15 kW Duolq Totu T Uzjifijt Shaft diameter: 480 mm Hopper dimensions mixer: 3704 x 1983 mm Loading height: 2800 mm Press shaft diameter: 500 mm Shaft length: 2600 mm Power: 45 kW Filter: round 8 / 10 / 12 mm; slot 2.5 mm Filter area: 3 square meters MACHINE DETAILS Weight (standard): 14 t Length: 8129 mm Width: 2143 mm Height: 3595 mm EQUIPMENT Stationary crushing plant Doppstadt DW 2060 E Conveyor belt Magnetic separator Mixing and dosing plant 5cbm Doppstadt DSP205 presses Pumps for discharging the liquid fraction Container with electrical management and control system

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Gleason Pfauter G320 CNC generating grinding machine + Promot Automation handling unit Functionality and machine features Generating grinding machine with 8 numerically controlled axes for machining gears with straight and helical teeth that can be produced by generating, including a dressable worm profile wheel. Linear and rotary main axes are hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. TECHNICAL DETAILS Control: Siemens 840 incl. control panel Module: 0.5-7.0 Workpiece diameter: 10 - 380 mm Number of teeth: 10 - 600 Duolq Tifstu T S Usiot Vertical slide stroke Z: 200 mm Horizontal slide stroke X: 230 mm Tangential slide stroke Y: 135 mm Swivel angle of clamping head A: ± 45° Stroke - tailstock center: 125 mm Tangential slide stroke - dressing V: 180 mm radial slide stroke - dressing U: 110 mm C-axis (table rotation): 360° rapid traverse speed - linear axes: 10,000 mm/min Rotation speed: 3,000 rpm (infinitely variable) Table rotation speed: 240 rpm Table resolution: 0.001° Processing feeds: stepless Working feeds: infinitely variable Grinding wheel diameter: 270 - 350 mm Grinding wheel width: 104 mm Grinding wheel bore: 160 mm MACHINE DETAILS Machine weight: 11,500 kg Machine space requirement: approx. 3.7 x 2.4 x 2.75 m Promot Automation space requirement: approx. 4.5 x 1.6 x 4.0 m EQUIPMENT - Promot automation - Conveyor belt - Cooling belt system - Hydraulic unit - Complete documentation

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, CO2 laser cutting machine with pallet changer and loading/unloading system and sheet metal storage system TECHNICAL DETAILS X-travel: 3420 mm Y-travel: 1550 mm Z-travel: 200 mm Working area: 3070 x 1550 x 200 mm Duslq Totu T N Ssifiet Control unit: Fanuc 160 iLB Source: Fanuc C4000 E Laser power: 4000 W Cutting thickness steel / stainless steel / aluminum: 22 / 12 / 9 mm Table load: 920 kg Feed X/Y/Z: 80 / 80 / 60 m/min MACHINE DETAILS Weight: 15,500 kg EQUIPMENT - Double storage tower LKI UL300FO TWIN year 2004 - Torit intake and filter unit - Cooling unit MTA 201

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,300 h, Functionality: fully functional, machine/vehicle number: W09268227L2D380007, Mobile shredding plant as a semi-trailer chassis HIGHLIGHTS - SMART HOPPER - Extended feed range and automatic adjustment of the material feed to the performance of the shredding system. - VARIODIRECT DRIVE - The newly developed and patented VarioDirect Drive ensures stepless and variable power transmission directly to the shredding drum. - MULTI TOOL CONCEPT - Use of the shredding tools with the Dopp-Lock® system from the other slow-speed machines in sizes M and L, including the new limiter generation. - INNOVATIVE HOUSING CONCEPT - All doors open upwards for optimum accessibility. The GRP doors with their large air intakes ensure optimum ventilation and also reduce noise emissions. - EASY ACCESS CONCEPT - The comb flap, which opens up to 90°, makes it much easier to access the entire shredding chamber. This increases occupational safety and availability, even after service work. TECHNICAL DETAILS Area of application: Waste wood processing, mixed construction site waste, commercial waste Main areas of application due to roller size: Green waste / waste wood / waste / roots Drive type: Diesel Roller drum length: 2,200 mm Roller diameter: 600 mm Roller speed: 2 - 28 rpm Dujlqotu Tv Ue Tifist Number of teeth/comb teeth: 20 / 14 Tooth height: 174 mm Lower belt dimensions: 0.8 x 2.9 m Underbelt speed: 1.3 - 2.9 m/s Rear belt dimensions: 1.0 x 4.9 m Tail conveyor speed: 1.25 x 3.0 m/s Discharge height: 3,162 mm Loading height: 3,390 mm MACHINE DETAILS Permissible total mass: 27 t Tare weight: 18 t Transport dimensions: 7673 x 2530 x 3604 mm Maximum working dimensions: 11.5 x 2.5 x 6.6 m Track width: 2090 mm Collision protection: 2500 mm Maximum driving speed: 80 km/h Engine: MTU-DM 6R1000 Daimler OM 936 Rated power: 260 kW Emission standard: EuroMot V Displacement: 7,700 cm³ Tank size: 500 l EQUIPMENT - 2-axle semi-trailer chassis unit - Neodymium overband magnet - Irrigation - Size L shredding system

Condition: good (used), Year of construction: 2003, Functionality: fully functional, TECHNICAL DETAILS X-axis: 1000 mm Y-axis: 800 mm Z-axis: 800 mm Control: Siemens Sinumerik 840 D Speed range: 25 - 6000 rpm Workpiece swivel range: 900 mm Distance table center - spindle: 130 mm Clamping surface plate: 500 x 630 mm (DIN 55201, form A2) Workpiece weight per table: approx. 800 kg Fixture height: 1100 mm Ball screw: 63 mm Spindle diameter: 100 mm Torque 100% / 60% ED: max. 900/1130 Nm Feed range X-, Y-, Z-axis: 1-36000 mm/min Feed force X-,Y-,Z-axis 25% ED: approx. 25000 N Rapid traverse speed X-,Y-,Z-axis: 36 m/min Dujlstu S Syoq Tifiet Rapid traverse rotary table: 30 rpm MACHINE DETAILS Space requirement: 8.00 x 3.50 x 3.50 m Weight: 24 tons

Condition: ready for operation (used), Functionality: fully functional, TECHNICAL DETAILS Spindle passage: 65 mm Turning length: 280 mm Spindle diameter in front bearing 85 mm Control: 840C Siemens Speed - main spindle: 6,300 rpm C-axis 0.001° Drive power: 13 / 21 kW Torque: 62 / 102 Nm Speed - counter spindle: 4,500 rpm Torque: 10 Nm Clamping diameter: 65 mm Clamping length: 38 mm Spindle bore: 15.5 mm Turret 1 Number of tool positions: 8 Shank cross-section: 25 x 48 Tool change time - tool: 0.2 s Travel distance - x: 90 mm Traverse path - z: 280 mm Feed force: 5.5 kN Rapid traverse: 24 m/min Driven tool positions: 8 Speed: 6,000 rpm Drive power: 3.3 kW Torque: 7.5 Nm Rear side machining of stationary tools: max. 5 Turret 2 Number of tool positions: 6 Travel distance - x: 81 mm Traverse path - z: 80 mm Feed force X/Z: 8.3 / 5.5 kN Rapid traverse X/Z: 16 / 24 m/min MACHINE DETAILS Total power requirement: approx. 30 kW Machine weight: approx. 3.0 t Space requirement: approx. 7.0 x 3.0 x 2.5 m EQUIPMENT - Siemens 840 C control system - Loading magazine: Type IEMCA TAL/ AUTO65/38 Djlstuvtasq Tifijut - Two Revovler - Driven tool stations - Counter spindle on upper tool turret - 1x back boring unit - with impact unit - many accessories

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 112793, TECHNICAL DETAILS Machining diameter: max. 240 mm turning length: max. 700 mm Speed: 6000 rpm Bar capacity: 55 mm Control unit: OSP-E100L Turret: 2 x 12 stations Duslotuva Teq Tifist Number of driven stations: 2 x 10 Tool speed: 5000 rpm Tool holder: VDI 30 Collet chuck: 2 x Power Chuck, MACHINE DETAILS Machine dimensions: 2700 x 2000 x 1980 mm Weight: 7000 kg EQUIPMENT - Tailstock - Tool equipment - Chip conveyor - tools - Bar loader IEMCA Vip 80-E - coolant

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW MACHINE DETAILS Connected load: 10.5 kVA Machine weight: approx. 1 t Dolq Tifjtuu Dpeisut Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC

Condition: good (used), Year of construction: 2015, operating hours: 14,843 h, Functionality: fully functional, machine/vehicle number: 816815404, TECHNICAL DETAILS X-axis travel: 8,000 mm Y-axis travel: 2,000 mm Worktable length: 8,000 mm Width of the worktable: 2,000 mm Laser source: YLS-8000-CUT Laser power: 6 kW Laser type: Solid-state laser Laser gain medium: Ytterbium laser Wavelength range: 1070 ± 5 nm Operating mode: CW / modulated Modulation frequency: 0 - 5 kHz Power tunability: 10 - 100 % Control: SIEMENS Sinumerik 840D controller Programming software: Lantek or Metalix Guide: SIEMENS linear guides Duelott Shgoq Tifiet Cutting head: PRECITEC MACHINE DETAILS Total length: 22,000 mm Total height: 2,515 mm Total width: 4,040 mm Total weight: 33,500 kg Switch-on time: 32619 h Laser time: 14843 h Operating voltage: 400 V, 50 Hz Rated current: 113 A Laser voltage: 400 - 480 V, 50 - 60 Hz

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Clamping table grid Raster groove exit tables: 2 pcs. Working height of grid table: 850 mm Grid dimension: 30 mm Groove width: 7 mm Groove depth: 7 mm Distance between vacuum holes: 120 mm EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Duslqott R E Nj Tifiot Feeding portal HOMAG Profi TBA370/40/16 Turning and alignment station

Condition: good (used), Year of construction: 2013, Functionality: fully functional, TECHNICAL DETAILS Control: Heidenhain TNC 620 Speed: 4,000 rpm Weight: approx. 12,000 kg Max. Table load: 2,000 kg Travel X: 1,600 mm Travel Y: 750 mm Travel Z: 900 mm Clamping surface: 1,800 x 700 mm MACHINE DETAILS Gear spindle: 2-stage Spindle power: approx. 38 kW Tool holder: SK 50 Spindle: manually swiveling Tool magazine: 24-fold EQUIPMENT Delqetuwkbe Tifiout Chip conveyor with coolant system Electronic handwheel

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, TECHNICAL DETAILS Spindle passage: 65 mm Turning length: 280 mm Spindle diameter in front bearing: 85 mm Control: 840C Siemens Speed - main spindle: 6,300 rpm C-axis: 0.001° Drive power: 13 / 21 kW Torque: 62 / 102 Nm Speed - counter spindle: 4,500 rpm Torque: 10 Nm Clamping diameter: 65 mm Clamping length: 38 mm Spindle bore: 15.5 mm Dolq Tiotuvq Hjfijut Turret 1 Number of tool positions: 8 Shank cross-section: 25 x 48 Tool change time - tool: 0.2 s Travel distance - x: 90 mm Traverse path - z: 280 mm Feed force: 5.5 kN Rapid traverse: 24 m/min Driven tool positions: 8 Speed: 6,000 rpm Drive power: 3.3 kW Torque: 7.5 Nm Rear side machining of stationary tools: max. 5 MACHINE DETAILS Total power requirement: approx. 30 kW Machine weight: approx. 3.0 t Space requirement: approx. 7.0 x 3.0 x 2.5 m EQUIPMENT - Siemens 840 C control system - Loading magazine: Type IEMCA TAL/ AUTO65/38 - Two Revovler - Driven tool stations - Counter spindle on upper tool turret - 1x back drilling unit - with impact unit - many accessories

Condition: good (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS CNC control: FANUC 18i X-axis: 800 mm Duolq Totuwhneifist Y-axis: 700 mm Z-axis: 750 mm B-axis: indexing axis Spindle motor: 25 KW Spindle speed: 8000 rpm Distance from spindle nose to table center: 150 - 900 mm Tool magazine: 60 places Max. Table speed: 20 rpm Tool changer: DIN SK50 EQUIPMENT Chip conveyor Without clamping angle