Second-hand machinery for sale (2,391)

Year of construction: 2018, Condition: good (used), Position consists of: (1) Ventilation system, (1) ventilation unit for outdoor use, (1) duct silencer, (1) throttle device, (1) chiller Fpobevy Er Hsvq R A Asg German: Air volume: 33,000 m3/h Can be throttled to 5,000 m3/h / 6,000 m3/h Connection power (gas): 135 kW Cooling capacity of chiller: 132 kW Dimensions: 5,600x2,900x2,900mm

Condition: excellent (used), operation weight: 1,850 kg, shovel volume: 0.04 m³, Year of construction: 2023, operating hours: 130 h, machine/vehicle number: SY001MCD19168, Technical Information: - Operating weight: 1850 kg - Bucket capacity: 0.04 m³ - Overall length: 3640 mm - Overall width: 980 / 1350 mm - Overall height: 2420 mm HYDRAULIC SYSTEM: - Main pump: Variable displacement axial piston pump - Max. oil flow: 72 l/min - Travel drive: Variable displacement axial piston motor - Swing motor: Axial piston motor - Max. oil flow (AUX1): 28 l/min ENGINE: - Yanmar 3TNV80F - Type: Water-cooled 4-stroke diesel engine - with swirl chamber injection - Emissions level: Stage V - Power: 14.6 kW / 2400 rpm - Max. torque: 64.7 Nm / 1800 rpm - Displacement: 1267 cc - Batteries: 1 × 12 V / 60 Ah WORKING RANGE - Max. digging depth: 2360 mm - Max. reach: 4000 mm Fsbvowhv Srsq R A Aepg - Min. swing radius: 1705 mm - Bucket breakout force ISO 15.2 kN - Stick tearout force ISO 9.2 kN

Condition: not inspected (used), Year of construction: 2021, machine/vehicle number: KRW32107L10402, overall weight: 48 kg, load capacity: 20 kg, input voltage: 48 V, We offer you, a service robot manufactured in 2021 by the manufacturer Keenon Robotics A service robot, equipped with ventilated chambers, designed for work in the hotel industry, for customer service, food delivery, etc. Basic data: power supply: 48V 12Ah battery charging time: 5h minimum passage width: 70cm maximum load capacity: 20kg Fpebvqowhv Nds R A Aog number of chambers: 2/3/4 (adjustable partitions) weight: 48kg charging station: Keenon C1 100-240V~ 50/60Hz overall dimensions width / depth / height (mm): 450/550/1080

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, Functionality: fully functional, spindle speed (max.): 40 rpm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 680 mm, TECHNICAL DETAILS aTECHNICAL DETAILS Linear axes Max. stroke X-axis (longitudinal slide): 300 mm Max. stroke Y-axis (vertical slide): 300 mm Max. stroke Z-axis (cross slide): 680 mm Max. travel speed: 15 m/min Rotation axes Workpiece head rotation A-axis: 0 – 360° Swivel range C-axis: 185° to 135° Max. travel speed C-axis: 10 rpm Spindle Spindle mount: ISO 50 Spindle center height: 155 mm Max. spindle speed: 40 rpm Tool dimensions Max. tool diameter (solid carbide): 32 mm (optimized range 2 – 20 mm) Max. cutter diameter: 200 mm Max. Peripheral grinding: 270 mm Max. tool length for face grinding: 250 mm Min. tool diameter: 2 mm MACHINE DETAILS Electrical power: 30 kVA Weight: approx. 3,950 kg Dimensions: 2,201 x 2,221 x 2,216 mm EQUIPMENT - ELBARON grinding mist extraction system - External cooling system Fpebvq Rswhqqvj A Ajg - Renishaw measuring system - Collets for all common diameters up to 20 mm - Complete description and installation manual Linear axes Max. stroke X-axis (longitudinal slide): 300 mm Max. stroke Y-axis (vertical slide): 300 mm Max. stroke Z-axis (cross slide): 680 mm Max. travel speed: 15 m/min Rotary axes Workpiece head rotation A-axis: 0 – 360° C-axis swivel range: 185° to 135° Max. C-axis travel speed: 10 rpm Spindle Spindle mount: ISO 50 Spindle center height: 155 mm Max. spindle speed: 40 rpm Tool dimensions Max. tool diameter (solid carbide): 32 mm (optimized range 2 – 20 mm) Max. cutter diameter: 200 mm Max. peripheral grinding: 270 mm Max. tool length for face grinding: 250 mm Min. tool diameter: 2 mm MACHINE DETAILS Electrical power: 30 kVA Weight: approx. 3,950 kg EQUIPMENT - ELBARON grinding mist extraction system - External cooling system - Renishaw measuring system - Collets for all common diameters up to 20 mm

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 158231, turning length: 300 mm, turning diameter: 400 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 420 mm, travel distance Z-axis: 180 mm, controller model: Siemens Sinumerik 808D, TECHNICAL DETAILS Max. turning diameter over bed: Ø 400 mm Max. turning diameter over support: Ø 280 mm Max. workpiece length (center distance): 300 mm Control: Siemens Sinumerik 808D Travel paths X-axis travel: 180 mm Z-axis travel: 420 mm Fobvswhqnnjq R A Ajpg Rapid traverse (X & Z axis): 6,000 mm/min Spindle Spindle speed range: 250 – 3,000 rpm Spindle mount: A2-5 Spindle bore: 42 mm Drive Main drive motor power: 7.5 kW Tailstock Tailstock: hydraulic Max. tailstock quill stroke: 80 mm Tailstock taper: MT4 MACHINE DETAILS Dimensions (without Chip conveyor): 2,470 x 1,370 x 1,880 mm Total weight: approx. 4,500 kg EQUIPMENT - Heavy-duty design - Inclined bed design (also suitable for crane parts) - Chip conveyor (also suitable for stainless steel chips) - Hydraulic collets - Hydraulic jaw chuck

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, cutting length (max.): 4,400 mm, cutting height (max.): 80 mm, main saw diameter: 80 mm, power: 13.2 kW (17.95 HP), TECHNICAL DETAILS Usable cutting length: 4,400 mm Slider length: 4,300 mm Working height: 890 mm Cutting height: 80 mm Main saw cutting height: 80 mm Clamping jaw opening: 75 mm Clamping jaw closing: 1 mm Number of jaws: 5 Clamping positions: 68 – 368 – 1,168 – 2,168 – 3,168 – 4,168 mm Minimum package thickness for side shift: 12 mm Sawing technology Main saw motor: 13.2 kW / 50 Hz Scorer motor: 1.5 kW Main saw diameter: 330 mm Scorer diameter: 180 mm Feed speeds Saw carriage feed speed: 1 – 150 m/min Return speed of the Saw carriage speed: 100 - 150 m/min Fpobvq R Aewhqh Ie Asg Table and transport elements Number of roller rails: 10 Number of air tables (2,000 x 510 mm): 4 Extraction Lower nozzle: 200 mm Upper nozzle: 75 mm MACHINE DETAILS Voltage: 400 V / 50 Hz / 3-phase EQUIPMENT - GVision XP - Brushless saw carriage

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 413.00.003, pressing force: 60 t, bale weight: 400 kg, TECHNICAL DETAILS Febvq R Ajwhqf To Ajpg Pressing force: 60 t Main drive power: 9.0 kW Bales Bale dimensions (W x D x H): 1,100 x 1,100 x 800 mm Bale weight: max. 400 kg Binding: 4-fold vertical MACHINE DETAILS Machine dimensions (L x W x H): 6,500 x 1,850 x 2,800 mm Weight: approx. 8,000 kg Electrical system Operating voltage: 400 V Frequency: 50 Hz Total connected load: 28 kW Regular maintenance keeps the baler in good working order.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 59,693 h, Functionality: fully functional, laser power: 2,700 W, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, controller model: Sinumerik 840D, TECHNICAL DETAILS X-travel: 2,585 mm Y-travel: 1,280 mm Control: Sinumerik 840D Power and Capacities Laser power: 2,700 W Max. sheet thickness: 8 mm Max. punching force: 180 kN Max. workpiece weight: 230 kg Travel speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X+Y): 108 m/min Stroke sequences Punching (E = 1 mm): 1,000 rpm Marking: 2,800 rpm C-axis (punching / tapping): 330 rpm Tool technology Linear magazine: 21 tools with 2 clamps MultiTool: 5/10-station (max. 230 Tools) Tool change time: 0.3 – 3.2 s Mounting: hydraulic Mono-tool holder, 360° rotation for all tools Laser technology Laser source: TLF 2700, RF-excited (CO₂) Laser control: DIAS 3 Cutting head: 5" lens + 7.5" lens Features: APC distance control, lens monitoring, programmable cutting gas pressure Functions: HI-LAS, SprintLas, ContourLas, AutoLas Plus, MultiTool, thread forming, marking/fast beading Punching technology Punching head: hydraulic, 360° rotation Length compensation/lubrication: automatic MACHINE DETAILS Space requirement (L x W): 8,000 x 7,165 mm Height: 2,710 mm Weight: 16,000 kg Operating hours On-time: 64,320 h Laser operating hours: 59,693 h Fobswhpu Hsvq R A Aspg Beam operating hours: 21,394 h EQUIPMENT - 3 clamps - Cooling unit - Extraction system - Part chutes / ejection cylinders (500 x 500 mm, sensor-monitored) - MultiTool - Multi-beam light barriers - Hydraulic quick-release system - Extraction system and compact dust protection device against scattered radiation on the cutting head

Condition: not inspected (used), Functionality: unexamined, Year of construction: 2018, We offer you, Fpobswhvxxjvq R A Aeg a set of 4 separation and filtration devices with UV sterilization function. The machines were manufactured in 2018 by KMA, as UV-II 8000/ EE EW8 models The devices are adapted to work with high-pressure HPDC casting sockets to separate contaminants generated during the casting of production elements. This system filters used air to separate emissions in foundries. The devices operate in both circulating and exhaust air modes. Factory equipment of each device: - chamber with a filter assembly - exhaust system with a pump - suction and filtration systems - automatic cleaning system by compressed air - automatic threat extinguishing system - exhaust fan type IE3AC09L2002 - explosion-proof non-return valve - tank with a capacity of 190 dcm3 (litres) - control panel

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Fpsbvqswhpc Rs R A Ajg Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 54,710 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Fobvjwhpbtoq R A Aopg Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die - Parts conveyor belt at punching and laser station - Chip conveyor with tilting container - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 221030, total width: 3,000 mm, total length: 3,750 mm, total height: 1,800 mm, overall weight: 1,100 kg, input voltage: 380 V, We offer you, automatic machine for the production of cardboard boxes ZH-400Z. Fsbswhvnaovq R A Aopg Basic data: glue application head: 1 pc. maximum cover format (mm): 400x300 minimum cover format (mm): 90x65 maximum center format (mm): 300x300x65 minimum center format (mm): 65x65x10 efficiency (cycles/min.): 16-24 accuracy of fit (mm): -0.4 weight: 1100kg dimensions length/width/height (mm): 3750x3000x1800 Automatic machine designed for the production of Rigid Box type cardboard boxes, with a work table for preparing the cover. The production process consists of feeding the covers, applying glue, pressing and forming the box. Use in industry, for the production of cardboard and paperboard packaging.

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Fpobvqowhpbgs R A Asg Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: not inspected (used), Year of construction: 2020, Functionality: unexamined, total height: 2,024 mm, total width: 3,662 mm, total length: 4,345 mm, We offer you, an automatic machine for the production of disposable masks with a nose wire. The device was manufactured in 2020 by a Polish company. Basic data: Fpjbvq R Ajwhvdbo Asg Efficiency: 35-45 pcs/min Mask dimensions: 175 x 93mm Supply voltage: 230/400V Control voltage: 24 VDC Power: 3kW Working pressure (bar): 6 The machine is designed for the production of disposable hygienic masks with a metal nose wire and ear bands.

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Fpsbvq Rswhpais A Aog Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Febvqjwhn Uxo R A Aopg Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fobvq R Aswhn Swj Ajpg

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Fpebvqjwhn Ryj R A Aog Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Hurco TM8 CNC Lathe. S/No. TM8-01111057AAA (2007) with Winmax Control, Collet Chuck, Tooleye, Parts Catcher, 12 Station Turret, Tailstock, Swarf Conveyor, Multi-feed, Bar Feed Fjbvswhn Npjq R A Aopg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2017, Hurco TM6i CNC Lathe. S/No. ST6-16101AZEAAAH (2017) with Minmax Lathe Control, 200mm Diameter 3 Jaw Chuck, Tooleye, Parts Catcher, 12 Station Turret, Hydraulic Tailstock, Swarf Conveyor, Hydrafeed Multi-feed 35 Barfeed Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fobvq Rowhn Hus A Aepg

Condition: used, Year of construction: 2004, Haas VF-2DHE Vertical Machining Centre. S/No. 34618 (2004), 24 Position ATC, Table Size 915 x 355mm, SK40 Taper. Country of Origin: U.S.A. Fpsbvq Rewhn Edj A Aog This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2008, Hurco VMX30M Vertical Machining Centre. S/No. S342-06119078DJA (2008) with Max Control, Table Size 1020 x 510mm Fpsbvq Rjwhn Aij A Ajg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, Hurco VMX30M Vertical Machining Centre. S/No. S342-16102081DJA (2011) Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fobvq R Aowhn Acs Aepg

Condition: used, Year of construction: 2017, Hurco VM5i Vertical Machining Centre. S/No. S5-1610487CKLAH (2017) with Minmax Mill Control, 16 Position ATC, Table Size 455 x 355mm, 10k Spindle, Spindle Taper SK40 Fpobvq R Aowhnz Ee Aeg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2016, Hurco VMX30Mi Vertical Machining Centre. S/No. S343S-160466JKAAH (2016) with Winmax Mill Control, 30 Position ATC 10K Spindle, Spindle Taper SK40, Table Size 1020 x 510mm, Swarf Conveyor Fpsbewhnzlevq R A Asg Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.