Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, conveyor belt width: 605 mm, cutting height (max.): 50 mm, cutting width (max.): 200 mm, TECHNICAL DETAILS Area of application: Meat and ham press for fresh, smoked and slightly frozen products Cutting: Plastic belt with dividers Belt width: 605 mm Djlqz T Hov Ip Hwswsut Divider height: 50 mm Distance between dividers: 200 mm MACHINE DETAILS Length: 3,000 mm Width: 2,000 mm Height: 1,780 mm Voltage: 3 x 400 V Frequency: 50/60 Hz Conversion: Conversion from pneumatic to electric servo motors by Fischer for better control

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Duolqz T Hov Ip Alswjt Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: 20907, feed length X-axis: 380 mm, feed length Y-axis: 280 mm, feed length Z-axis: 280 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 340 °, Spindle replaced about 6 years ago - only 8,000 spindle hours! TECHNICAL DETAILS Control: Fanuc GE 160 i Length: 950 mm Width: 310 mm T-slots: 3 x 14 mm Grinding head, grinding spindle Spindle type: Motorized swiveling Drive power: 7.5 kW Speed range: 0 - 9,000 rpm Wheel mount: HSK 50 Wheel diameter: 50 - 200 mm Max. number of wheels: 6 Axes Travel X / Y / Z: 380 / 280 / 280 mm Rapid traverse X / Y / Z: 20 / 20 / 10 m/min Resolution X / Y / Z: 0.0001 mm Drive power X / Y / Z: 1.0 kW, 3 Nm C-axis swivel angle: 340° Rapid traverse: 66°/s Resolution: 0.001° Drive power: 1.0 kW, 3 Nm Rotational axis A: continuous Rapid traverse: 167°/s Resolution: 0.001° Drive power: 0.5 kW, 2 Nm Mounting taper: ISO 50 Spindle height: 210 mm MACHINE DETAILS Width: 1,590 mm Depth: 1,930 mm Height: 2,250 mm Weight: 5,500 kg Noise level: < 70 dB(A) according to DIN 45 635 Operating hours: 30,000 h Power supply Motor power: 7.5 kW Connected load: 33 kVA Voltage: 3 x 400 V AC Hydraulics Delqzjv Iptqs T Hweut Type: DMR 300 Principle: Gear pump Drive: Electric motor Voltage: 3 x 230/400 V Filling volume: 11 L Pendulum volume: 4 L Flow rate: 2.8 L/min Operating pressure: max. 98 bar Pneumatics Type: CFG 301 Machine air consumption: approx. 2,000 l/h Measuring system air consumption: approx. 3,000 l/h Air consumption: approx. 1,000 l/h Fire extinguishing system: yes Working pressure: 6 bar Maintenance: Maintenance-free, except for the filters Air quality: according to DIN ISO 8573-1 Central lubrication Type: CFG 012 Principle: Gear pump Drive: Electric motor Tank capacity: 30 bar Pressure limitation: 0.2 l/h Flow rate: 0.2 l/h Ambient temperature: +10°C to +40°C Protection class: IP 54

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, turning length: 450 mm, turning diameter: 210 mm, spindle bore: 51 mm, TECHNICAL DETAILS Control: Fanuc i Max. turning length: 450 mm Max. turning diameter: 210 mm Spindle Dslqev In Iajz T Hwjut Bore in the spindle: 51 mm Tool turret Number of slots: 12 slots Driven: all EQUIPMENT - Fanuc i control - Central cooling - Tool probe - Knife holder

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 1300030446, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, workpiece length (max.): 6,500 mm, rotational speed (max.): 6,000 rpm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, The machine will be delivered free-loading on a truck. TECHNICAL DETAILS X1-axis travel: 6,450 mm X-axis travel: 300 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Feed rate X1 / X, Y, Z: 34 / 18 m/min Tools Turret: 8 slots Tool diameter: 80 mm Oscillating operation: possible Tool change time: 1.2 s Spindle speed: 6,000 rpm Spindle power: 5.5 kW Tool taper holder: BT 30 Collet holder: S15 Clamping connections: 12 MACHINE DETAILS Air consumption per cycle: 180 l Dimensions: 9,800 x 3,000 x 2,400 mm Height with hood open: 3,300 mm Weight: 5,400 kg FEATURES - Automatic clamp adjustment Dujlqz T Hsv Im S Dowjt - Continuously adjustable speed - Measuring plate included Delivery: EXW - free truck

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: FH.FNJF-00296 / 1224402827, paper weight (min.): 40 g/m², paper weight (max.): 250 g/m², paper width (min.): 150 mm, paper width (max.): 780 mm, paper height (min.): 180 mm, paper height (max.): 1,200 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum paper format: 780 x 1,200 mm Minimum paper format: approx. 150 x 180 mm Paper weight: 40 - 250 g/m² Maximum mechanical speed: up to 230 m/min Folding types: parallel fold, zigzag fold, altar fold, window fold, etc. EQUIPMENT - 6 folding pockets for versatile folding types Delev Imuxjqz T Hwjut - 1 blade for additional folding options - Heidelberg PFH-82 pallet feeder for continuous sheet feed - Steel vertical sheet delivery SBP 66.D-MKE for precise sheet placement - Automatic settings for quick job changes - Touchscreen operation for easy control

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor CNC 8055 Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Djlqz Tjv Ifw Ss Hwjut Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Quill range: 150 m Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Condition: like new (used), Year of construction: 2011, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 6BE1AZ2661, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, swivel angle A-axis (min.): -100 °, swivel angle A-axis (max.): 100 °, The machine was used for training purposes and has only approximately 400 spindle hours. TECHNICAL DETAILS X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis swivel range: ± 100° A/B-axis speed: 22 / 16 rpm X/Y/Z rapid traverse: 24 m/min Control: Heidenhain TNC 426 Mill Worktable Clamping area: 700 x 520 mm Tolerance: 5 T-slots with 18 mm Load capacity: 500 kg Spindle Speed range: 50 - 12,000 rpm Drive power: 11 kW Tool changer Tool magazine: 20-station Change mechanism: Automatic double-arm quick changer with Tool length adjustment device Tool holder: SK 40 with directional logic (DIN 69871) Tool diameter: 80 / 125 mm Dujlqz T Hov Ipnhowst Tool length: 250 mm Tool weight: 8 kg MACHINE DETAILS Spindle hours: approx. 400 h Dimensions: 2,040 x 2,445 x 2,920 mm Weight: 4 t Air pressure: 6 bar EQUIPMENT - Win3D View simulation - 5th-axis rotary swivel unit, built in 2013 - Electronic handwheel - Coolant system (internal coolant supply possible) - Comprehensive tool set for operation - Tool cabinet with 66 tool holders - Center-clamp vise and three-jaw chuck - Tool blow-out device - Cover including chip protection door - Leveling elements - 3 pieces

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 390 mm, table load: 350 kg, rotational speed (max.): 8,000 rpm, tool diameter: 100 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor 8055 X-axis: 760 mm Y-axis: 430 mm Djlqz Tev Ifl No Hwsut Z-axis: 390 mm Max. rapid traverse: 24 m/min Spindle motor Continuous power: 5.7 kW Continuous power (1 hour): 7.5 kW Max. speed: 8,000 rpm Work table Dimensions: 900 x 410 mm Max. load: 350 kg Tool handling Max. tool length: 200 mm Max. tool diameter: 100 mm Max. tool diameter with free adjacent positions: 130 mm Max. tool weight: 8 kg Tool change time: 10 s Max. number of tools: 16 MACHINE DETAILS Length: 2.2 m Width: 2.0 m Height: 2.4 m Weight: 3,000 kg Connected load: 15 kVA No additional tools or clamping devices are included.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,094 h, Functionality: fully functional, machine/vehicle number: UT 0609, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! 5-axis universal machining center with integrated 2-axis CNC rotary/tilting table TECHNICAL DETAILS Machine type Control: Heidenhain TNC 620 Travel path X: 1,520 mm Travel path Y: 520 mm Travel path Z: 460 mm Rapid traverse: 48 m/min Table Turning diameter: Ø 650 mm (removable to 500 mm) Table load: max. 500 kg Swivel range: -5° to +110° Milling spindle Speed: up to 12,000 rpm Drive power: 19 kW Torque: 121 Nm (10% duty cycle) Tool change Capacity: 24 tools (double arm changer) Tool size: ISO 40 according to DIN 69871A MACHINE DETAILS Control switch-on time: 31,943 h Machine switch-on time: 23,443 h Spindle running time: 14,094 h Coolant Tank capacity: 200 liters Centrifugal pump: 83 l/min at 8 bar EQUIPMENT - Additional rigid table on the left in the work area - Full splash guard cover - Work area light - Hydraulic and heat compensation - Direct measuring systems for all axes - Preparation for high-pressure flushing - Chip conveyor - Manuals on CD-ROM - Laser probe U-series - Calibration burr with SK 40 tool holder - Preparation interface for Blum infrared measuring probe - Workpiece measuring probe for milling machine - SK40 pull stud - Software additional equipment: Touch system function Automatic kinematic measurement using touch system cycles Swivelling of the processing level and reundtuisch processing Dolqz T Hev Iazxswjut

Condition: good (used), Year of construction: 2016, SN: 111399, control, type CNC-C00, 3 + 1 axes, tool holder BT30, spindle speed max. 10,000 rpm, tapping speed max. 6,000 rpm, cooling through the spindle (IKZ) 30 bar, travel paths X/Y/Z 650 x 400 x 305 mm, rapid traverse speed X/Y/Z max. 50 m/min, feed speed X/Y/Z 1 - 30,000 mm/min, tool change time 0.9 s, 22 tool magazine positions, rotary table, make Lehmann, type 2XEA510, space requirement 1,900 x 3,500 x 2,700 mm, dead weight 3,500 kg, chip conveyor, make Hakusan, SN C095934, hydraulic unit, suction, make Sara, air gap control, chip hopper Delov Aawisqz T Hwjut

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 011003, paper width (min.): 210 mm, paper width (max.): 738 mm, paper height (min.): 297 mm, paper height (max.): 1,300 mm, No reserve price - guaranteed sale at the highest bid! Djlsv Imicoqz T Hwjut TECHNICAL DETAILS Construction: 4 folding pockets in the first folding unit, 2 knife folding stations Maximum paper format: 738 x 1,300 mm (with round pile feeder) Minimum paper format: 210 x 297 mm Folding length: 35 - 560 mm (58 mm in pocket 1) Performance: Up to 230 m/min, 25,000 cycles/h in cross fold Paper thickness: 40 g/m² and more MACHINE DETAILS Dimensions (L x W x H): 485 x 166 x 165 cm Total weight: 2,235 kg Power connection: 400 V Power consumption: 4.0 kW EQUIPMENT - Automatic setting for quick and precise setup - Round pile feeder with 80 mm stack height for continuous reloading - Glue station HHS-C220 for additional processing options - Touch screen operation for easy handling

Year of construction: 2009, operating hours: 5,387 h, Condition: ready for operation (used), Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! The bid obliges the buyer to collect the item on time in week 12. Functions: sawing, notching, milling, drilling, tapping, milling TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. travel speed X / Y / Z: 60 / 60 / 30 m/min Rotation A-axis: ±110°, continuous Rotation C-axis: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc milling cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Djlqsv H Awyez T Hwsut Number of places in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of the clamping blocks: Yes Number of clamping blocks: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length of single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length of single bar processing: 30 x 30 / 300 mm Movement: Tool Max. number of profiles per machine configuration: Up to 8 profiles (depending on the individual bar length) Number of profile fixed stops: 2 Moving the clamping blocks during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes In-house programming without NC/CNC knowledge: Yes Schüco CAM can be installed on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On time: 20,616 h Spindle time: 5,387 h

Condition: like new (used), Year of construction: 2016, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: A6D160702, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, turning diameter over bed slide: 130 mm, bar passage: 15 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 180 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Dolqz Tsv Ipbus Hwout Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: 180 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Optical tool presetter - Tailstock - Pneumatic chuck - Automatic door - I/O expansion board for robotics and DNC interface

Condition: not inspected (used), Year of construction: 2012, operating hours: 44,079 h, Functionality: unexamined, machine/vehicle number: 8089000198B, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Fanuc 31i, Extensive accessories included (see pictures) TECHNICAL DETAILS Control: Fanuc 31i MSL Bar passage: 60 mm Spindle bore: 65 mm Maximum spindle speed: 5,000 rpm C-axis: available Counter spindle: 5,0000 rpm Delqjv Hrw Noz T Hwout MACHINE DETAILS Total weight: 3,500 kg EQUIPMENT - Hinged belt chip conveyor - Bar loader preparation - Driven tools for drilling and milling - Double tool holder - Tool holder 20x20 mm for slide and reverse machining - Drill holder for turret (diameter 32 mm) - Collet holder for main and counter spindle - Collet chuck ROEHM KFD HS 112-3 - Software for tool wear monitoring for Fanuc - Bar loader is not included delivery included

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel paths Delsv Iazlsqz T Hweut X-axis: 320 mm Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine - Automatic wire feeder - Many spare parts and wear parts

Condition: good (used), Year of construction: 2014, SN: 254141, dead weight 8,400 kg, control, make Mazak, type Mazatrol Matrix 2, chuck diameter 8°, oscillation diameter max. 320 mm, max. machining length (chuck workpiece) 180 mm, max. machining length (shaft workpiece) 530 mm, bar diameter max. 51 mm, spindle (HD1 and HD2) speed max. 5,000 rpm, rated power (30 min operation) 22 kW, turret (left/right), 12 turret stations, axis feed/travel paths: rapid traverse X1/X2 30,500 mm/min, rapid traverse Z1/Z2 33,000 mm/min, travel path X 240 mm, Y 100 mm, Z 440 mm, travel path Z (HD2) 496 mm, L/W/H 3,670 x 1,996 x 2,090 mm Dslqz T Hev Aavfswjut

Condition: excellent (used), Year of construction: 2016, operating hours: 8,732 h, Functionality: fully functional, machine/vehicle number: 90-12-19-00, laser power: 95 W, laser wavelength: 1,064 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 300 mm Y-axis: 300 mm Z-axis: 500 mm B-axis: ± 120° C-axis: 360° TruPulse 103 laser parameters Laser power on the workpiece: 95 W Max. Pulse peak power: 5 kW Duelqz T Heuwrz Tewst Beam quality: 12 mm-mrad Wavelength: 1,064 nm Pulse duration: 0.3 ms - 50 ms Max. Pulse repetition frequency: 833 Hz Max. Pulse energy: 30 J Min. diameter of laser light cable: 300 µm Type of laser light cable: LLK-B Max. Axis speeds Axis speed parallel to axis in X: max. 6 m/min Axle speed parallel to axis in Y: max. 6 m/min Axis speed parallel to axis in Z: max. 6 m/min Simultaneous axis speed: max. 10 m/min Axis speed B-axis: max. 15 1/min Positioning accuracy Linear axes (X, Y, Z): 0.1 mm Rotary axes (B): 0.1° Repeat accuracy Linear axes: 0.03 mm Rotation axes B, C: 0.03° Work table clamping surface X-Y cross table: 390 mm x 300 mm T-slots basic table: 600 mm x 375 mm Rotary axis C125 Turntable diameter: 125 mm Diameter center passage: 61 mm Speed: 200 1/min, 150 1/min Positioning accuracy: 0.2° Mass moment of inertia: 0.02 kg-m², 0.04 kg-m² MACHINE DETAILS CNC control: TRUMPF control system based on a B&R control system Ambient temperature: 5°C - 43°C Connection and consumption Electrical connection (voltage): 380 V - 460 V Electrical connection (frequency): 50 Hz - 60 Hz Type. Power consumption at rated output: 3.8 kW Cooling: Water-water Design Dimensions (W x H x D): 980 mm x 1,220 mm x 505 mm Weight: 230 kg Max. Max. number of laser light cables: 3 Protection class (water cooling): IP54 Ambient temperature (water cooling): 10°C - 40°C EQUIPMENT - TruPulse 103 - Rotary axis C125 with rotary feed-through - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Parts removal - Status ramp - Line laser - Counter spindle prepared for pneumatic chuck - Large number of driven tool holders - Large number of fixed tool holders

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, Functionality: fully functional, measuring range X-axis: 180 mm, measuring range Z-axis: 350 mm, Absolutely as good as new machine, only the training was carried out on the machine. Top condition! TECHNICAL DETAILS Model: MarForm MMQ 400-2 High-precision roundness measuring axis Motorized centering and tilting table: Ø 285 mm Straightness measuring axis Z: 350 mm Straightness measuring axis X: 180 mm Z- and X-axis: with digital linear scales Length measuring probe Model: T7W Angular range: 360° Angular position and measuring direction: motor-controllable in the program Bi-directional probe T7W Measuring range: ±500 µm Dslqou Hkh Doz T Hwsut Measuring force: adjustable Standard probe arm: 60 mm / 3 mm Computer and software Computer: Dell Operating system: Windows 10 IoT Enterprise Accessories included: Recovery CD, mouse pad Monitor 24" TFT monitor according to Mahr standard

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Dueljv In Nkoqz T Hwet Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 286, workpiece weight (max.): 2,000 kg, spindle speed (max.): 3,000 rpm, travel distance milling slide X-axis: 650 mm, travel distance milling slide Y-axis: 300 mm, travel distance milling slide Z-axis: 600 mm, swivel angle A-axis (min.): -20 °, swivel angle A-axis (max.): 20 °, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis (transverse): 650 mm Y-axis (vertical): 300 mm Dolev Iay Usqz T Hweut Z-axis (drilling axis): 600 mm A-axis (swivel range of the drilling axis): ± 20° W-axis (table adjustment): 650 mm Control: Siemens Simatic OP17 Drilling capacity Maximum drilling depth: 900 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 4 – 20 mm Thread cutting: M 16 Drilling spindle Spindle mount: MK 2 Spindle speed: 0 – 3,000 rpm Spindle drive (60% E.D.): 6.0 kW Spindle drive (100% E.D.): 4.1 kW Workpiece table Dimensions: 1,100 x 650 mm Swivel range: ± 360 degrees Load capacity: 2,000 kg MACHINE DETAILS Length: 2,620 mm Height: 1,637 mm Table height: 950 mm Width: 1,485 mm Weight: 1,600 kg X-axis (transverse): ball screw with servo motor Y-axis (vertical): ball screw with servo motor Z-axis (drilling axis): rack and pinion drive with servo motor W-axis (table adjustment): ball screw with gear motor

Condition: good (used), Year of construction: 2011, SN: 1736, consisting of: cold chamber die casting machine, make Colosio, type PFO 1200, year of manufacture 2011, SN 1736, specification: clamping force 1,235 t, max./min. pressing force 82.5/29 t, central ejector 46.2 t, adjustment of the movable mold plate max./min. 1,000 - 500 mm, pressing stroke 730 mm, stroke of central ejector 210 mm, mold height max./min. 1,100 - 450 mm, distance between the columns 995 x 995 mm, external dimensions of mold plate 1,540 x 1,540 mm, guide column Ø 205 mm, pressure area (400 kg/cm²) max. 3,085 cm², pump motor power 60 kW (2x 30), operating pressure 140 bar, piece weight (aluminum) max. 20 kg, minimum size of the mold 720 x 720 mm, room dimensions 3,580 x 10,774 x 3,702 mm, dead weight 54,700 kg, control, make Colosio, aluminum melting and dosing furnace, make Foundry 4, type TD1400DC, year 2015, SN F415-0328, specification: capacity 1,400 kg, working weight 1,200 kg, 2,900 x 1,600 x 2,125 mm, dead weight 3,125 kg, size of adjustment device 4.5 t, stroke of adjustment device 400 mm, heating output 22 kW, energy consumption in warming mode 8 kW/h, control cabinet in the basement, linear sprayer, make AED Automation, type DAG1000MCT2B, year of manufacture 2011, SN SO091422, with control cabinet in the basement, 6-axis industrial robot, without type plate, with control cabinet, make Kuka, extraction hood, with walk-on platform, knock-off station, 2-part cooling rack, cooling tunnel, with belt conveyor, protective fence, with safety device, quenching basin, deburring press, make Reis, type SEP13-65 D III, SN 1002212, control cabinet, hinged conveyor belt, make. Westa, type SPB150L63S-600-35°, SN 20115023, Specification: Belt conveyor line, make Westa, type 1115, SN 20115, approx. 6,000 mm Duolqev Aaprez T Hwst

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Duslsv Imzfjqz T Hwot Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: good (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis: 400 mm Y-axis: 350 mm Z-axis: 350 mm Tool changer: 24-way electrode changer Year of manufacture of electrode changer: 2017 Cooling unit Manufacturer: RIEDEL Year of manufacture: 2016 Model: WKS 51.2-M5... Dslqz T Hjv Iayzoweut Area of application: Air conditioning of the CNC die-sinking EDM system

Year of construction: 2021, Condition: good (used), SN: 220840029, best. from: Magnesium injection molding machine, make JSW, type JLM850-MGIIe, year of manufacture 2021, SN 220840029, specification: dead weight 50,000 kg, screw diameter 100 mm, injection pressure 67-86 MPa, injection capacity (theoretical) 1,728 cm³, shot weight (theoretical) 1,417 g, injection rate (theoretical) 35,343 cm³/sec, screw speed 0-160 rpm, nozzle diameter 17 mm x R40 mm, nozzle lift-off travel 75 mm, nozzle contact force 233 kN, position of the injection unit (2 stages) 0-200 mm, closing technology 5.Double toggle lever (folds inwards), mold closing force 8,330 kN, mold opening force 833 kN, platen spacing max. 2,3000 mm, mold opening stroke 1,200 mm, mold height 500-1,000 mm, distance between tie bars (HxV) 1,060 x 100 mm, clamping platen size (HxV) 1,590 x 1,590 mm, centering ring Ø 190 mm, mold fastening method T-slot type, opening and closing speed. of the casting mold: closing casting mold 61 m/min, opening casting mold 59 m/min, ejector force x ejector stroke 350 kN x 150 mm, casting mold height (HxV) min. 640 x 640 mm, pump power motor output 75 kW, servo motor output 22 kW, heating power 63 kW, total power 160 kW, machine size 11,300 x 2,900 x 3,800 mm, hydraulic tank capacity 800 l, cooling water consumption 8 m³/h, magnesium feed tank, make DMS, type MAC-2300, year of manufacture 0, SN, specification: mobile, approx. 1,600 x 1,500 x 1,900 mm, dead weight 500 kg, without type plate, feed fan, make Matsuni, type JL4-6VC-J, year of manufacture. 2021, power 2.2 kW, linear sprayer, make AED Automation, type AED 1000 LST2-Tele, year of manufacture 2022, SN LST2-0010, specification: , 6-axis industrial robot, make Kuka, type KR50 R2500 F/SEL, year of manufacture 2021, SN 1421941, specification: dead weight 587 kg, load capacity 50 kg, reach 2,501 mm, with control cabinet, cooling shelves, with 2 output chutes, protective fence, with safety device, control, , deburring press, make Reis, type SEP13-07-65 Dialog IV, year of manufacture 2022, SN , specification: dead weight 10,000 kg, nominal force 650 kN, , hinge conveyor, make Knoll, type 500P-40-L, year 2021, SN 1517512/2021 Dslqz Tsv Aanho Hweut