Second-hand machinery for sale (2,405)

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, The machine was recently partially overhauled at a cost of €15,000! The machine features six high-quality grinding motors, a spur motor, and turbines. TECHNICAL DETAILS Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Taper grinding: max. 16° Table Table size: 600 x 380 mm T-slots: 6, 10 mm wide, 50 mm spacing Table load: 300 kg Tool holder and speeds 22S: E23 Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 80S speed: 40,000 - 80,000 rpm T10/T16: Ø 3 mm T10/T16 speed: 100,000 / 160,000 rpm Groove grinder: 2,900 - 34,500 rpm Planetary motion: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rates X/Y feed: 0 - 1,200 mm/min Dcelqu D Ujv Rck Uo Ijg W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Mains pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Power consumption: 8.3 kVA Weight: 3.1 t EQUIPMENT - Groove grinder - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction system - High-quality accessories included

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Dslqev Rck Iou D U Ijcg Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer Dcolqu D Usv Rb Hhs Iog - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: as good as new (ex-display), Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Screw conveyor: for one cup size Ring length adjustment device: adjustable in millimeters Gear motor: with Danfoss inverter Maximum speed: 6,000 cups/h Installation: for operation in a production line Machine structure Frame: completely clad in stainless steel Control cabinet: stainless steel with Omron PLC Safety devices: made of stainless steel Sensors & safety Light barrier at the entrance: regulates speed according to the flap Dcoljv Rblqjqu D U Ijg Clogging protection: at the machine exit Light barrier: for adjusting the film length Further information according to the manufacturer - without guarantee Installation dimensions: 6.0 x 1.6 x 2.0 m Weight: 1.5 t Sleeve length: 30 - 300 mm Cup height: 100 - 360 mm Cup diameter: 35 - 115 mm Motor power: 0.37 kW Production capacity: 1000 - 9000 cups/h

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: ZPR/M/2016/000016, No reserve price - guaranteed sale at the highest bid! Description: The machine sorts fruit by diameter and color depending on the selected program option. The roller discharge system discharges fruit sideways onto one of six collection chutes. Dcslquev Ra Uqj D U Ieg TECHNICAL DETAILS Capacity: 1.5 - 2 t/h Installation Dimensions: 8.8 x 8.4 m Electrical Connection: Electrical connection only at the bin tipper; all other components are modular along the line. Area of Application: Small and medium-sized farms Function: Sorts fruit by diameter and color, e.g., apples Ejection System: Roller discharge discharges fruit sideways onto six collection chutes. Additional Equipment: Automatic bin tipper or roller conveyor. Operation: Electronic, user-friendly control panel. Other: Connecting conveyors can be removed to allow complete packing on all chutes. EQUIPMENT - Automatic container tipper - 1 unit - Conveyor with infeed belt - 1 unit - Inspection roller conveyor - 1 unit - Variable-speed "V" conveyor - 1 unit - MONO-type sorting machine - 1 unit - Packing table - 6 units - Scales - 5 units - Conveyor to filler PTO-1 L = 2.6 m - 1 unit - Conveyor to filler PTO-1 L = 2.0 m - 1 unit - Automatic container filling system - 2 units

Condition: refurbished (used), Functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, empty load weight: 53,050 kg, Year of construction: 2012, operating hours: 13,200 h, machine/vehicle number: 835.5.1445, Very good overall condition! The engine and wear parts were replaced in 2024 - total overhaul cost approx. €70,000 No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Unladen weight: 53,050 kg Fuel type: Diesel MACHINE DETAILS Total operating hours: approx. 13,200 h Engine running time: approx. 160 h (since replacement) Dolqsv Ran Dou D U Iscg EQUIPMENT - Tracked chassis

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: A40401385, Year of construction: 2017, operating hours: 28,612 h, load capacity: 12,000 kg, lifting height: 4,930 mm, load center: 600 mm, fuel type: diesel, mast type: standard, construction height: 3,050 mm, TECHNICAL DETAILS Lift height: 4,930 mm Load capacity: 12,000 kg Dolquev N I Hfo D U Iocg Load center: 600 mm Mast Type: Standard Mast height: 4,070 mm Sideshift: Available Fork positioner: 570 / 2,320 mm Fork carriage width: 2,450 mm Forks: 200 x 70 x 1,800 mm MACHINE DETAILS Total weight: 13,700 kg Engine: Diesel, Cummins Operating hours: 28,612 h Length: 4,660 mm Width: 2,520 mm Forklift height: 3,050 mm EQUIPMENT - Tires 12.00-20 - Standard mast with sideshift and fork positioner - Cabin with Heating Windshield damaged

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 00031781-ERH, back gauge travel distance Z-axis: 1,000 mm, sheet thickness steel (max.): 6 mm, table height: 800 mm, cutting width (max.): 2,100 mm, TECHNICAL DETAILS Cutting width: 2,100 mm Max. material thickness: 8 mm Max. sheet thickness (ST42): 6.0 mm Dslqu Djv N Iv Te U Ijcg Max. sheet thickness (stainless steel): 4.0 mm Cutting angle: 1.2° Stroke rate: 28 strokes/min Cuts per minute: 20 Backgauge adjustment range: 1,000 mm Table height: 800 mm Hydraulic system Oil volume: 150 l Holders Number of holders: 11 Control system Control system: CYBELEC CybTouch MACHINE DETAILS Motor power: 11.0 kW Total weight: 4,500 kg Length x width x height: 3,010 x 2,100 x 1,670 mm

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, turning length: 350 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 640 mm, controller model: OSP U 100 L, TECHNICAL DETAILS Max. turning length: 350 mm Max. turning diameter: 340 mm Diameter over bed: 530 mm Diameter over cross slide: 380 mm Distance between centers: 1,000 mm CNC control: OSP U 100 L Travel paths X-axis: 260 mm Z-axis: 640 mm Spindle and drive Spindle mount: VDI 40 Spindle bore: 62 mm Speed: max. 4,500 rpm Spindle motor power: 22 kW Upper turret: 12 positions, driven Lower turret: fixed tools Dcjlqu D Usv Rbtho Iog MACHINE DETAILS Dimensions (L x W x H): 3,970 × 2,100 × 1,932 mm Weight: 4,800 kg

Condition: ready for operation (used), Year of construction: 1958, Functionality: fully functional, machine/vehicle number: 52/58, ram adjustment: 140 mm, pressing force: 250 t, ram stroke: 190 mm, plate thickness: 24 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Dcolquev N Iqdj D U Isg Press force: 250 t Max. sheet thickness: 24 mm Stroke rate: 30/min Ram stroke: 40 - 190 mm Ram adjustment: 140 - 65 mm Further information according to the manufacturer - without guarantee Table: 850 x 800 mm Ram: 600 x 520 mm Dimensions: 1,270 x 2,920 x 3,000 mm

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, TECHNICAL DETAILS Type: Automatic cutting machine Longitudinal tools: 6 real + 6 virtual (multi-line processing) Cross tool: 1 piece Tool change: Automatic set-up Cardboard box infeed: Combi, suitable for single sheet and continuous cardboard box Web widths side by side: Two web widths can be alternated side by side Working height: 900 mm Zero edge: Left/right freely selectable Control panel: Right Workpiece parameters: Web width infeed: 350 - 1,500 mm Web width side by side: Total max. 1,350 mm Stacking height incl. pallet: 2,150 mm Pitch of continuous material: 1,150 mm Web length outfeed: min. 300 mm Cutting tolerance: Lengthwise: max. 0.5 % Transverse direction: max. ±2.0 mm Quality of the cardboard: Cardboard thickness: 2.0 - 7.0 mm (±0.2 mm) Raw material quality: Up to 2.30 BC according to DIN 55468 Processable cardboard qualities 1-wall: Thickness up to approx. 4 mm Processable cardboard qualities 2-wall: Thickness up to approx. 7 mm Cardboard types: FEFCO0403 Standard / FEFCO0410 Standard / FEFCO0429 Lid outside / FEFCO0900 Single MACHINE DETAILS Weight: approx. 2,000 kg Dimensions (WxDxH): approx. 3,450 x 2,400 x 3,700 mm Operating pressure: 6 bar Air consumption: approx. 20 - 100 NL/min (depending on cycle output and carton type) Operating voltage: 400 V, 50 Hz, 3 Ph./N/PE Connected load: 4.5 kW Rated current: 6.5 A Max. Back-up fuse: 16 A Dolqsv N Htkju D U Iocg EQUIPMENT - Online database with performance indicator per carton design - Degree of perforation: Adjustable - Offset creasing: Available - Multiline processing: Possible - Carton designs: Rotatable (90° grid) - Carton designs: Mirrorable - Quality Plus Mode: Supported - Control: PLC control according to IEC 61131 - Industrial PC: Available - Operating system: Windows 7 32bit professional (US) - Memory: 1 hard disk permanently installed, 1 hard disk USB for data backup, Network: 2 x Ethernet 100 MBit - Interfaces: The machine is prepared for the use of tapio, for communication for digital products. - Free use: tapio MachineBoard app included (unlimited in time) - Software: IntelliCut machine control - Automatic carton production: According to production list (HOMAG CSV format) - Softkeys: For machine functions - Fault diagnosis: Available - Science program: Included - Display: Control panel with full HD multi-touch display - User interface: Standardized HOMAG user interface - Navigation: Simple, intuitive operation of the machine - Machine data recording MMR basic: For usage-dependent maintenance and display of key production figures (e.g. number of pieces, production time) - Control cabinet integrated in the machine - Machine installed in accordance with European standard EN 60204 - Machines are intended for in-house use

Condition: good (used), Year of construction: 2018, operating hours: 8,752 h, Functionality: fully functional, machine/vehicle number: VDB180076, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 HSCI X-axis: 2,000 mm Y-axis: 1,100 mm Z-axis: 800 mm Table clamping area: 2,200 x 1,000 mm Distance spindle nose to table: 150 - 950 mm Milling spindle Tool holder: SK 50 Spindle speeds: 6,000 rpm Spindle drive: 30 kW Dolquev N Hrgj D U Iecg Feed rate Feed range: 8,000 mm/min Rapid traverse: 15 m/min Tool data Tool changer: 20 Tool weight: 15 kg Tool length: 400 mm Tool diameter: 125 / 250 mm MACHINE DETAILS Total weight: approx. 20 t Dimensions (L x W x H): 5.5 x 5.4 x 3.7 m On-time: 22,813 h Spindle hours: 8,752 h EQUIPMENT - Electrical preparation for 4th and 5th axes - Electronic handwheel - Automatic central lubrication system - Hardened and ground guideways - Fully protective cabin - Internal coolant system with 20 bar - Chip conveyor

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T32207.0422, Year of construction: 2004, operating hours: 14,908 h, load capacity: 8,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: electric, mast type: standard, construction height: 2,860 mm, TECHNICAL DETAILS Lift height: 4,000 mm Fork carriage width: 2,000 mm Load capacity: 8,000 kg Load center: 600 mm Drivetrain Motor: Electric Voltage: 80 V Capacity: 1,550 Ah Battery year of manufacture: 2015 Mast Dolqjv N I Dweu D U Iocg Type: Standard Sideshift: Available Fork positioner: 425 / 1,960 mm Mast height: 3,150 mm Forks Dimensions: 150 x 65 x 1,400 mm MACHINE DETAILS Forklift height: 2,860 mm Length: 4,000 mm Width: 2,050 mm Total weight: 12,174 kg Operating hours: 14,908 h EQUIPMENT - SE 8.25-15 tires - Standard mast with sideshift and fork positioner - Cab with heating

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 6,000 W, workpiece weight (max.): 950 kg, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 270 mm, TECHNICAL DETAILS X-axis: 3,048 mm Y-axis: 1,524 mm Z-axis: 270 mm Control: CNC-ALPHA T2.0 Laser power: 6 kW Dynamics Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Positioning accuracy: ± 0.05 mm/m Repeatability: ± 0.05 mm Cutting Cutting gas: Nitrogen Cutting gas: Oxygen Material thickness: Mild steel: 25 mm (depending on cutting gas) Material thickness: Stainless steel: 20 mm (depending on cutting gas) Dcjlqu D Uov N Hdis Ijg Material thickness: Aluminum: 16 mm (depending on cutting gas) Material thickness: Brass: 12 mm (depending on cutting gas) Cutting table Number of pallets: 2 Number of motors: 1 Max. Table load: 950 kg MACHINE DETAILS Length: 8,900 mm Width / Depth: 2,260 mm Height: 2,220 mm Max. power consumption: 90 A / 44 kW Total weight: 7,500 kg EQUIPMENT - Welded frame construction made of carbon steel - Aluminum gantry made of an aerospace alloy with a honeycomb structure - Two-stage shuttle table with short table changeover times for high productivity - Table with synchronous motor and frequency drive for high positioning and repeatability - Pull-out drawers in the table for cleaning and disposal of small parts and slag - Modular cutting table with easy module replacement for easy maintenance - Manganese steel plates as table covers to protect the internal table structure - Effective fume extraction from the table through 6 individually controlled dampers - 4 fans in the machine roof ensure a continuous supply of fresh air and, in combination with a Powerful extraction system for a clean cutting chamber - Programmable automatic lubrication of the rack and pinion drive - Servo drive system from ALPHA/WITTENSTEIN or GUDEL - HIWIN/PMI precision linear guides for high precision and motion accuracy - PANASONIC drive motors for high speed and stability - Wireless CNC handwheel for controlling machine functions such as start/stop, calibration, edge detection, marking, and emergency stop - Industry 4.0 through cloud solution and real-time machine monitoring, remote diagnostics, and maintenance - Tricolor machine status display with LED and 360° visibility - Cameras for monitoring the cutting chamber and shuttle table with monitor - Machine with HSG P06 laser cutting head - Water cooler with dual-circulation cooling system and high cooling capacity - Voltage stabilizer for protection against overvoltage and undervoltage - SICK M4000 light barrier for the cutting table - Wear parts set with 2 protective lenses, 10 nozzles, and 1 ceramic ring - Machine complies with CE standards - Machine documentation in German, electronic

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 121198, turning length: 1,000 mm, turning diameter: 370 mm, spindle speed (max.): 3,800 rpm, bar passage: 62 mm, controller model: OSP-E 100 L, A Fanuc M-710i robot is also included. General overhaul in 2014 TECHNICAL DATA Turning diameter: 370 mm Turning length: 1,000 mm Bar diameter: 62 mm Control unit: OSP-E 100 L Tailstock taper: MT5 C-axis: present Spindle and drive Spindle taper: A2-88 Spindle speed: 3,800 rpm Main motor: 22/15 kW Tool speed: 4,500 rpm Delqu D Usv Rbppe Ijcg Motor for driven tools: 3.7 kW Upper turret: 12 positions, driven Lower turret: fixed tools Fanuc robot Model: M-710i Control: R-J2 Year of manufacture: 1997 MACHINE DETAILS Dimensions (L x H x W): 3,900 x 2,050 x 1,950 mm Weight: 6,800 kg Connected load: 30.6 kVA EQUIPMENT - C-axis and two turrets - Various accessories included (see images) - Chuck included Connection cables between the robot and the machine are not included.

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Main spindle Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Dcolquev N Inis D U Isg Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 13676, number of slots in tool magazine: 20, Equipment: chip conveyor, Due to space requirements, the machine is being auctioned without a reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to pick up the machine by March 31, 2025! TECHNICAL DETAILS 4th axis: Dividing head mechanically functional, however, the circuit board needs to be replaced Tool changer: 20-station Chip conveyor: Available Filter system: Paper belt filter Operating voltage: 360 - 480 V Further technical data according to the manufacturer - without guarantee X-travel: 1,270 mm Y-travel: 508 mm Z-travel: 635 mm Spindle speed: 8,000 rpm Control: CNC Haas Table length: 1,321 mm Table width: 457 mm Spindle nose to table: 107 - 742 mm Workpiece weight: 793 kg T-slot width: 16 mm T-slot spacing: 80 Number of T-slots: 5 Tool changer: 20 Tool diameter: 89 mm Tool weight: 5.4 kg Spindle taper: CAT 40 Dimensions: 2.8 x 3.0 x 3.2 m Dcjlqu D Usv Ni A Io Ieg Weight: 5.5 t

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping area: 800 x 630 mm Max. table load: 800 kg Holding torque on the table top: 3,500 Nm Rapid table traverse (round): 13.6 rpm Table feed (round): 3,600°/min Torque: 2,089 Nm Djlqu Dov N Hmwe U Iocg Pallet storage: 5-station Tool magazine Tool holder: SK40 Number of tool positions in the magazine: 120 Max. tool length: 315 mm Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input resolution: 0.001 mm EQUIPMENT - Electronic hand control panel: included - Measuring probe: included - Tool breakage detection: included - Flushing gun: included - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: included

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 5064045, Year of construction: 2005, operating hours: 17,306 h, load capacity: 11,500 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: standard, construction height: 6,880 mm, TECHNICAL DETAILS Lift height: 10,000 mm Load capacity: 11,500 kg Load center: 1,200 mm Mast type: Standard Drivetrain Fuel: Diesel Engine type: Volvo Transmission: ZF Tires Tire type: Pneumatic Tire size: 12.00-20 Dcjlqujv N Iyrj D U Ieg MACHINE DETAILS Overall length: 5,050 mm Overall height: 6,880 mm Overall width: 3,500 mm Weight: 27.6 t EQUIPMENT - Spreader 20 / 40 - Full cab - Heating

Condition: used, Functionality: fully functional, mileage: 266,648 km, power: 265 kW (360.30 HP), fuel type: diesel, Year of construction: 2007, Vehicle identification number WMAH39ZZ47M468240, registered in 2007, permissible gross vehicle weight 37,000 kg, gross vehicle weight 19,880 kg, engine power 10,518, 265 kW, diesel, mileage 266,648, concrete pump, SCHWING, type BP600RKMD, max. 350 bar hydraulic, 71 bar concrete/medium, length of the transition pipe at the outlet of the transport line 2,540 mm, volume of concrete 7 m³, TÜV until 07/2025, mixer was serviced by SCHWING in February 2024 (blade, vibrator, sensor replaced), truck, mixer and pump are in good condition Dcelqjv A Upmsu D U Iog

Condition: ready for operation (used), Year of construction: 1980, Functionality: fully functional, machine/vehicle number: 2637, pressing force: 160 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Pressing force: 1,600 kN Motor power: 4 kW Safety distance: 110 mm Overtravel: 13 mm Lubrication system: Available Manufacturer: Eckardt Dcelev N Ifboqu D U Isg Operation: Two-hand operation Leveling machine Manufacturer: Kohler Type: HVZ3/350 Serial number: 100014 Year of manufacture: 1981 Roller conveyors Number: 2 Dimensions: 300 x 2,000 mm Further information according to the manufacturer - without guarantee Pressure capacity: approx. 160 t Column width: 850 mm Ram surface: 800 x 700 mm Stroke: 400 mm Ejector stroke: 300 mm Table surface: 800 x 700 mm Dimensions W x D x H: 1,800 x 1,800 x 4,200 mm Weight: approx. 12 t

Condition: refurbished (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 0318, Machine from the insolvency of an automotive supplier - machines are currently still in operation! Retrofit in 2015 Dcelqu Dov N Iaro U Iog TECHNICAL DETAILS Roller conveyor Roller width: approx. 500 mm Length: approx. 7,000 mm Material feed: included Light barrier enclosure: included Saw blade table Diameter: 356 / 406 / 456 / 503 mm Material thickness: 0-25 / 26-50 / 50-75 / 75-100 mm Diameter: 560 / 610 / 660 / 710 mm Material thickness: 100-125 / 125-150 / 150-175 / 175-200 mm Further information according to the manufacturer - without guarantee Cutting window: 600 mm Cutting height: 200 - 355 mm Stop length: 3.6 - 24 m Cutting length range: 12 mm - unlimited Accuracy Position tolerance: ± 0.08 mm Vertical perpendicularity: ± 0.01 mm / mm material thickness Horizontal perpendicularity: ± 0.05 mm / mm Feed speeds Motor power: 22 kW Slide cutting speed: up to 12,700 mm/min Stop increment speed: up to 12,700 mm/min Stop return speed: up to 20,000 mm/min

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 1096687, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 1,200 mm, table length: 400 mm, Equipment: chip conveyor, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table dimensions: approx. 1,200 x 400 mm EQUIPMENT - Tool changer - Chip conveyor - Swivel axis - Oil mist extraction Further information according to the manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 794 kg Tool diameter: 76 mm Tool slots: 24+1 Dcelsv N Hzzoqu D U Isg Machine dimensions: approx. 3.9 x 2.7 x 2.7 m Weight: approx. 5.7 t

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 172, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Weight: 1 t Motor power: 6.5 kW Further information according to the manufacturer - without guarantee Front roller spacing continuously adjustable: 200 - 1000 mm Number of driven rollers: 3 Drive type: Electric motors Maximum speed: 22 rpm Roller height: 300 mm Torque: 1,600 Nm Dolquov Nhimj D U Ijcg Works on both sides: rolling at the front, bending at the rear Length: 1.6 m Width: 1.3 m Height: 1.4 m Weight: 1.2 t

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 86004811, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Belt filter system Manufacturer: Knoll Type: HF150 Year of manufacture: 1994 Filtration Djlqjv Nhf Ueu D U Iscg Filter type: Candle filter Discharge conveyor belt Manufacturer: DTW Dimensions: 400 x 2,500 mm MACHINE DETAILS Operating voltage: 380 V, 50 Hz Motor power: 4.68 kW Heating power: 36 kW