Second-hand machinery for sale (2,405)

Year of construction: 2021, Condition: good (used), SN: 220840029, best. from: Magnesium injection molding machine, make JSW, type JLM850-MGIIe, year of manufacture 2021, SN 220840029, specification: dead weight 50,000 kg, screw diameter 100 mm, injection pressure 67-86 MPa, injection capacity (theoretical) 1,728 cm³, shot weight (theoretical) 1,417 g, injection rate (theoretical) 35,343 cm³/sec, screw speed 0-160 rpm, nozzle diameter 17 mm x R40 mm, nozzle lift-off travel 75 mm, nozzle contact force 233 kN, position of the injection unit (2 stages) 0-200 mm, closing technology 5.Double toggle lever (folds inwards), mold closing force 8,330 kN, mold opening force 833 kN, platen spacing max. 2,3000 mm, mold opening stroke 1,200 mm, mold height 500-1,000 mm, distance between tie bars (HxV) 1,060 x 100 mm, clamping platen size (HxV) 1,590 x 1,590 mm, centering ring Ø 190 mm, mold fastening method T-slot type, opening and closing speed. of the casting mold: closing casting mold 61 m/min, opening casting mold 59 m/min, ejector force x ejector stroke 350 kN x 150 mm, casting mold height (HxV) min. 640 x 640 mm, pump power motor output 75 kW, servo motor output 22 kW, heating power 63 kW, total power 160 kW, machine size 11,300 x 2,900 x 3,800 mm, hydraulic tank capacity 800 l, cooling water consumption 8 m³/h, magnesium feed tank, make DMS, type MAC-2300, year of manufacture 0, SN, specification: mobile, approx. 1,600 x 1,500 x 1,900 mm, dead weight 500 kg, without type plate, feed fan, make Matsuni, type JL4-6VC-J, year of manufacture. 2021, power 2.2 kW, linear sprayer, make AED Automation, type AED 1000 LST2-Tele, year of manufacture 2022, SN LST2-0010, specification: , 6-axis industrial robot, make Kuka, type KR50 R2500 F/SEL, year of manufacture 2021, SN 1421941, specification: dead weight 587 kg, load capacity 50 kg, reach 2,501 mm, with control cabinet, cooling shelves, with 2 output chutes, protective fence, with safety device, control, , deburring press, make Reis, type SEP13-07-65 Dialog IV, year of manufacture 2022, SN , specification: dead weight 10,000 kg, nominal force 650 kN, , hinge conveyor, make Knoll, type 500P-40-L, year 2021, SN 1517512/2021 Deb Ebxsv Aanhol Tjcg

Year of construction: 2009, operating hours: 5,387 h, Condition: ready for operation (used), Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! The bid obliges the buyer to collect the item on time in week 12. Functions: sawing, notching, milling, drilling, tapping, milling TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. travel speed X / Y / Z: 60 / 60 / 30 m/min Rotation A-axis: ±110°, continuous Rotation C-axis: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc milling cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of places in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of the clamping blocks: Yes Number of clamping blocks: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length of single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length of single bar processing: 30 x 30 / 300 mm Dcsb Ebev H Awyoxl Tog Movement: Tool Max. number of profiles per machine configuration: Up to 8 profiles (depending on the individual bar length) Number of profile fixed stops: 2 Moving the clamping blocks during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes In-house programming without NC/CNC knowledge: Yes Schüco CAM can be installed on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On time: 20,616 h Spindle time: 5,387 h

Condition: not inspected (used), Year of construction: 2012, operating hours: 44,079 h, Functionality: unexamined, machine/vehicle number: 8089000198B, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Fanuc 31i, Extensive accessories included (see pictures) TECHNICAL DETAILS Dceb Ebxlsv Hrw No Teg Control: Fanuc 31i MSL Bar passage: 60 mm Spindle bore: 65 mm Maximum spindle speed: 5,000 rpm C-axis: available Counter spindle: 5,0000 rpm MACHINE DETAILS Total weight: 3,500 kg EQUIPMENT - Hinged belt chip conveyor - Bar loader preparation - Driven tools for drilling and milling - Double tool holder - Tool holder 20x20 mm for slide and reverse machining - Drill holder for turret (diameter 32 mm) - Collet holder for main and counter spindle - Collet chuck ROEHM KFD HS 112-3 - Software for tool wear monitoring for Fanuc - Bar loader is not included delivery included

Condition: excellent (used), Year of construction: 2016, operating hours: 8,732 h, Functionality: fully functional, machine/vehicle number: 90-12-19-00, laser power: 95 W, laser wavelength: 1,064 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 300 mm Y-axis: 300 mm Z-axis: 500 mm B-axis: ± 120° C-axis: 360° TruPulse 103 laser parameters Laser power on the workpiece: 95 W Max. Pulse peak power: 5 kW Beam quality: 12 mm-mrad Wavelength: 1,064 nm Pulse duration: 0.3 ms - 50 ms Max. Pulse repetition frequency: 833 Hz Max. Pulse energy: 30 J Min. diameter of laser light cable: 300 µm Type of laser light cable: LLK-B Max. Axis speeds Axis speed parallel to axis in X: max. 6 m/min Axle speed parallel to axis in Y: max. 6 m/min Axis speed parallel to axis in Z: max. 6 m/min Simultaneous axis speed: max. 10 m/min Axis speed B-axis: max. 15 1/min Positioning accuracy Linear axes (X, Y, Z): 0.1 mm Rotary axes (B): 0.1° Repeat accuracy Linear axes: 0.03 mm Rotation axes B, C: 0.03° Work table clamping surface Dob Ebxleuwrz Ts Tocg X-Y cross table: 390 mm x 300 mm T-slots basic table: 600 mm x 375 mm Rotary axis C125 Turntable diameter: 125 mm Diameter center passage: 61 mm Speed: 200 1/min, 150 1/min Positioning accuracy: 0.2° Mass moment of inertia: 0.02 kg-m², 0.04 kg-m² MACHINE DETAILS CNC control: TRUMPF control system based on a B&R control system Ambient temperature: 5°C - 43°C Connection and consumption Electrical connection (voltage): 380 V - 460 V Electrical connection (frequency): 50 Hz - 60 Hz Type. Power consumption at rated output: 3.8 kW Cooling: Water-water Design Dimensions (W x H x D): 980 mm x 1,220 mm x 505 mm Weight: 230 kg Max. Max. number of laser light cables: 3 Protection class (water cooling): IP54 Ambient temperature (water cooling): 10°C - 40°C EQUIPMENT - TruPulse 103 - Rotary axis C125 with rotary feed-through - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Parts removal - Status ramp - Line laser - Counter spindle prepared for pneumatic chuck - Large number of driven tool holders - Large number of fixed tool holders

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, Functionality: fully functional, measuring range X-axis: 180 mm, measuring range Z-axis: 350 mm, Absolutely as good as new machine, only the training was carried out on the machine. Top condition! TECHNICAL DETAILS Model: MarForm MMQ 400-2 High-precision roundness measuring axis Motorized centering and tilting table: Ø 285 mm Straightness measuring axis Z: 350 mm Straightness measuring axis X: 180 mm Z- and X-axis: with digital linear scales Length measuring probe Model: T7W Angular range: 360° Angular position and measuring direction: motor-controllable in the program Bi-directional probe T7W Dcjb Ebeu Hkh Dexl Tjg Measuring range: ±500 µm Measuring force: adjustable Standard probe arm: 60 mm / 3 mm Computer and software Computer: Dell Operating system: Windows 10 IoT Enterprise Accessories included: Recovery CD, mouse pad Monitor 24" TFT monitor according to Mahr standard

Condition: good (used), Year of construction: 2008, operating hours: 10,180 h, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, TECHNICAL DETAILS Electrical specifications: Operating voltage: 400 V Frequency: 50 Hz Connection: 20 kVA Control system: Control: FANUC mill i Spindle: Max. Spindle speed: 12,000 rpm Traverse paths: X-axis travel: 1,020 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Rapid traverse: 40 m/min Table: Table dimensions: 1,200 x 500 mm Max. Load capacity: 500 kg Tool holder and tool change: Tool holder: BT40 Tool changer: 30-fold Machine data: Year of construction: 2008 Machine weight: 6,850 kg Dimensions (L/W/H): 2,470 x 2,540 x 2,750 mm Tool parameters: Normal tool - Max. Tool diameter: 88 mm Standard tool - Max. tool length: 280 mm Tool length: 280 mm Standard tool - Max. Tool weight: 7 kg Large tool - Max. Tool diameter: 125 mm Large tool - Max. Tool length: 280 mm Large tool - Max. Tool weight: 7 kg Tool change time: Tool change time (chip to chip): 5 s Cooling and handling systems: IKZ: Yes (8 bar) Electric handwheel: Yes Chip conveyor: Yes Operating hours: Switch-on hours: 42,230 h Spindle hours: 10,180 h Dcobeu N If Eo Ebxl Tog The machines were only operated in a single shift and only approx. 50% of the time.

Condition: good (used), Year of construction: 2008, operating hours: 23,532 h, Functionality: fully functional, machine/vehicle number: 11760001053, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 480 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area Travel: 450 mm x 400 mm x 480 mm Main drive Motor spindle: 18,000 1/min incl. active cooling Power: 15 kW (40 % ED); 10 kW (100 % ED) 3D control: Heidenhain iTNC 530 Tool holder Type: SK 40 according to DIN 69871 Tool clamping: according to DIN 69872 Dsbeu Ra I Io Ebxl Tscg Equipment Swivel head: controlled NC swivel milling head (B-axis) Tool changer: Pick-up system, 16 magazine positions SK 40 Rotary table: NC rotary table diameter 450 mm Chip conveyor: available Control: 3D path control Switch-on time: 55,916 h Spindle time: 23,532 h See attached technical drawings (linked below). EQUIPMENT Tool changing device Chip conveyor 3D path control

Condition: excellent (used), Year of construction: 2000, operating hours: 6,000 h, Functionality: fully functional, machine/vehicle number: 7807005/3175.860T03, Complete robot cell: CO2 welding robot very well maintained including 2-way turntable for operator and with extraction system TECHNICAL DETAILS Robot payload: 10 kg Type of welding: CO2 MACHINE DETAILS Robot dead weight: 245 kg Weight: 450 kg Cell + table dimensions: 4000 x 3600 mm + 1600 x 870 mm Operating voltage: 3x400 V; 50 Hz Dsb Ebou Rdgnexl Tocg Power: 20 kVA

Condition: excellent (used), Year of construction: 2014, operating hours: 8,969 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, rapid traverse X-axis: 68 m/min, rapid traverse Y-axis: 68 m/min, rapid traverse Z-axis: 68 m/min, spindle speed (max.): 24,000 rpm, number of spindles: 15, TECHNICAL DETAILS Machining dimensions Max. Workpiece size: 3,200 mm x 920 mm x 70 mm (without additional support) Min. workpiece size: 200 mm x 70 mm x 8 mm Milling and drilling capacities Milling (minus milling cutter radius): 1,500 mm Complete machining depth: 1,300 mm Number of spindles (9 vertical / 6 horizontal): 15 spindles, incl. sawing unit for grooving in X-direction Milling spindle Power: 7.5 kW Tool holder: HSK Speed range: 1,000 - 24,000 rpm Linear changer: 6-fold X-Y changer: Yes Tool dimensions Tool diameter: Ø 110 mm Tool length: 80 mm Feed and speed Infeed guide: Height-adjustable for 4-sided routing and profiling Feed speed: 68 m/min Safety standards CE conformity: Yes Material handling Dob Ebou R N Rloxl Tjcg Solid roller conveyors: Yes Stops: 2 stops Workpiece clamping: Fully automatic positioning vacuum suction cups, ECOMODE MACHINE DETAILS Software: CAMPUS / NC-Hops, incl. aCADemy CAD/ CAM module machine license Dimensions L x W x H: 3,675 x 2,470 x 1,660 mm Weight: 2,200 kg Suction connections: 2 x Ø 120 mm + 1 x Ø 140 mm

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, center height: 180 mm, workpiece weight (max.): 250 kg, center width: 650 mm, grinding wheel diameter: 400 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Grinding process: external grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece and tailstock data Workpiece spindle: MK 4, Speed: 30 to 450 rpm Swivel range: 0 - 90° Tailstock: MK 4, quill stroke 45 mm Quill force: 200 - 600 N Table inclination: 10° Movement and adjustment ranges Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Drives and motors Grinding spindle motor outside: 4 kW Grinding spindle motor inside: 2.2 kW Workpiece spindle motor: 0.55 kW MACHINE DETAILS Weight: 3600 kg EQUIPMENT - Machine completely repaired and checked + painting work Dcob Ebxsv Hrixol Tjg - DC motor - Fully automatic work cycle with feed movement via wind rose switch for rapid forward, rapid reverse, grinding operation, feed stop and µm feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with continuously adjustable drive with rotating and lockable spindle - Feed control for longitudinal grinding and plunge grinding with input for retrieval, feed amounts, feeds, spark-out times and idle strokes - Air cushion-supported adjustment of the grinding headstock

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 02.291.00, installation height: 950 mm, distance table to ram: 700 mm, retraction force: 450 t, pressing force: 100 t, oil tank capacity: 200 l, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Pressing force: max. 1,000 kN Retraction force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (steps 100 mm): 1,150 mm Ram stroke without swivel device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm max. possible ram stroke (steps 100 mm): max. 1,200 mm Mold weight: max. 5,000 kg Load of the upper clamping plate: max. 2,500 kg Load of the tilting device: 3000 kg Tilting angle: 65° Positioning accuracy Dcebsu Szzce Ebxl Tog Plane parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Closing speeds Closing speed: max. 50 mm/s Opening speed: max. 50 mm/s Standard carriage speed: max. 50 mm/s Increased carriage speed: max. 200 mm/s Swivel-off speed standard: max. 50 mm/s Swivel speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Increased tilting speed: max. 100 mm/s Hydraulics Closing system pressure: max. 190 bar Opening system pressure: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Table ejector force: max. 35 kN Ejector stroke table: max. 130 mm Ejector movement table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Die cushion Die cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Condition: reconditioned (used), Year of construction: 2008, operating hours: 51,776 h, Functionality: fully functional, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, workpiece weight (max.): 900 kg, New resonator from Trumpf 07/2022: only 6,085 laser hours and 3,376 beam switch-on time Bid submission obliges to pick up on time until 13.12.2024! No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Travel: 3,000 x 1,500 x 115 mm workpiece weight: max. 900 kg Control: Sinumerik 840D Laser power: max. 5,000 W Wavelength: 10.6 µm Sheet thickness aluminum: max. 12 mm Sheet thickness steel: max. 25 mm Sheet thickness stainless steel: 20 mm MACHINE DETAILS Total length: 11,100 mm Total height: 2,600 mm Total width: 4,600 mm Total weight: 12,000 kg Total load activation time: 51,776 h Total beam activation time: 28,467 h Laser switch-on time before resonator change: 45,691 h Beam switch-on time before resonator change: 25,091 h Laser switch-on time after resonator change: 6,085 h Beam switch-on time after resonator change: 3,376 h EQUIPMENT - Cooling unit - Safety light barrier - Standard equipment Closed machine frame with integrated laser unit Automatic pallet changer Longitudinal conveyor belt for small parts and waste Drives: Gantry drive in combination with linear direct drives Cutting head quick-change device Laser cutting head with 250 mm lens Programmable cutting gas selection and pressure setting Capacitive height and process control (ControlLine) AutoLas Plus (FocusLine) Laser power control Position laser diode Hi-Las high-pressure cutting (NitroLine) Sprintlas (FastLine) ContourLas (ContourLine) PMS plasma sensors (PlasmaLine) Lens monitoring (LensLine) Automatic sheet metal outer edge detection Microweld Automatic nozzle cleaning Oil spraying device Work area lighting Dsbsu S Am Ts Ebxl Tscg Automatic switch-off Safety devices - multi-beam light barriers, encapsulated beam guidance Multi-chamber extraction system Compact dust extractor ToPs 100 lite RJ-45 network connection 3.5-inch floppy disk drive TFT color screen - Special accessories PCS Process Control System - PierceLine

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 0-261-07-2126, edge thickness (max.): 8 mm, working height: 950 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,760 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: KDN 530 C Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Suction diameter: 2 x 100 mm Working range Feed speed: 11 m/min (optional: 14 m/min) Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roll cutting: max. 3.0 x 45 / 0.8 x 65 mm Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Dcsb Ebxeu Tur Rol Tsg Voltage: 400 V, 3 Ph, 50 Hz Pneumatic operating pressure: 6 bar Noise emission value: 80-87 dB(A)

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, table width: 750 mm, table length: 425 mm, TECHNICAL DETAILS Feed in longitudinal direction (X-axis): 560 mm Feed in transverse direction (Y-axis): 500 mm Feed in vertical direction (Z-axis): 400 mm Table dimensions: 750 x 425 mm Control: Heidenhain Drill head Drill head holder: ISO40 Dcsb Ebxlou U Dyaj Teg Speeds: max. 4,000 rpm MACHINE DETAILS Length (L-R): 2,430 mm Depth (V-H): 2,100 mm Height: 1,855 mm Weight: 2 tons

Condition: good (used), Year of construction: 2007, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control unit: Mitsubishi Meldas 700 main spindle Deb Ebxeu U Efwol Tocg Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle clearance: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Pick-up spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven tools on vertical holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool system Turning tools (12x12x130): 5 Tool holder/cutting tool (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning steels (shank cross-section): 12 mm Collets and guide bush Collet main/tapping spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid traverse rates All axes: 32 m/min Machine specification Space requirement (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for end face machining on the main spindle - 3 driven tools for end face machining on the pick-up spindle - Main spindle with C-axis - Counter spindle with C-axis - 3x AGW rear end machining - Yellow warning light - Interior light - Workpiece conveyor belt - Kraft & Bauer CO² fire extinguishing system with fire damper - Loading magazine FMB Turbo 3-26 with two channels

Condition: excellent (used), operating hours: 55,000 h, Functionality: fully functional, laser power: 3,000 W, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, workpiece diameter (max.): 140 mm, New laser unit in 2021. TECHNICAL DETAILS Material and workpiece sizes Round tube: 12 mm - 140 mm Square tube: min. 12 x 12 mm - max. 120 x 120 mm Rectangular, oval, semi-oval, elliptical tube: min. 10 x 12 mm - max. 140 x 100 mm Standard material: steel, stainless steel, aluminum alloys (others on request) Loading and unloading system Loadable bar length: 3,200 - 6,500 mm Bundle loader loading capacity: 4,000 kg Unloading length: 3,500 - 4,500 - 6,500 mm Dcsb Ebxlju U Eyns Teg Control and drives Controlled axes with digital drive: No. 8 LT722D - No. 9 LT823D Digital CNC control: Siemens 840D Machining capability Max. machinable profile weight: 15 kg/m Cutting thickness steel: 8 mm Cutting thickness stainless steel: 5 mm Cutting thickness aluminum: 4 mm laser Laser hours: approx. 55,000 h Laser unit replaced: 2021 for 55,000 EUR The system is equipped with a Rofin Sinar Slab laser from the DC series, which enables optimum cutting quality with low consumption thanks to the following features - High beam coefficient (K > 0.9 - 0.8) - No moving parts, therefore very low maintenance costs - Minimal gas and power consumption

Year of construction: 2007, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Deb Ebsu U Hf Eexl Tscg Note: The machine's take-off has been shortened, but can be extended again

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, inner diameter: 250 mm, module thread tooth pitch (max.): 8, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Dcob Ejvdtx Nebxl Teg Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: excellent (used), Year of construction: 2011, operating hours: 1,934 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, water pressure: 3,600 bar, TECHNICAL DETAILS Operating hours: 1,900 h X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 200 mm Water pressure: 3,600 bar Djb Ebxlsvfm T Ne Tscg EQUIPMENT - Two cutting heads for simultaneous processing - Drilling head for piercing holes 2 mm (e.g. MAX plates) - Glue gun for small parts - desludging unit in BIG Pack - Bysoft6 software

Year of construction: 2018, operating hours: 5,650 h, Condition: excellent (used), Functionality: fully functional, lifting capacity: 1,000 kg, throat depth: 7,860 mm, machine/vehicle number: S 800 / 032, TECHNICAL DETAILS Maximum reach: 7.86 m Dcjbjvfpyrj Ebxl Tog Maximum load capacity at maximum reach: 1,000 kg Gripper unit: Multi-shell grab with 4 shells (250 liters) including rotary motor Swivel range: 360° Base dimensions: 2.35 x 2.35 m Cabin: Oversized, weatherproof cabin Operation: Control with 2 joysticks (Euro system) Boom structure: Base arm + middle arm + articulated arm Drive: Electric drive, 22 KW for the hydraulics, 0.12 kW cooler MACHINE DETAILS Operating hours: 5,650 h Ready for use: Ready to plug in, requires 63 CEE plug connection Hydraulic components: Tight and in good condition Tested in accordance with Betr.Sich V / DGUV 52: Valid until 10/31/2024 (was checked annually) Previous use: can processing EQUIPMENT - 2 x 4-fold multi-shell grippers from Dorn-Tec MG /4-25 with shell shape C, with rotary motor, good condition, (1 x ready for connection with hydraulic hoses, 1x reserve without hoses) - A new heavy-duty swivel gear with pinion purchased on 05.2021 (was purchased as a reserve due to the long delivery time) - some spare parts

Condition: repair required (used), Year of construction: 2006, Functionality: not functional, sheet thickness (max.): 40 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, Equipment: documentation/manual, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Work table length: 6,000 mm Work table width: 2,000 mm Maximum cutting thickness: 40 mm CNC control: SATO CNC 802 (retrofitted in 2019) Laser source: Kjellberg Hifocus 160 EQUIPMENT The machine is delivered with full documentation and manual. Dcsb Ebxovgcp Aol Tjg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 48,160 h, Functionality: fully functional, machine/vehicle number: 1425-088, spindle speed (max.): 15,000 rpm, turning diameter: 10 mm, quill stroke: 105 mm, Equipment: chip conveyor, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Max. Machining diameter: 10 mm Max. Headstock stroke (standard): 105 mm Drive power of the main spindle: 3.7 kW Speed of the main spindle: 500 - 15,000 rpm Indexing of main spindle: C-axis (standard) Tooling Turning tools: 6 pieces (Ø 8 mm) Drilling tools (4-spindle drilling unit): 4 pieces (ER 11) Cross-machining tools: 3 pieces (ER 11) Dceb Ebxlsvgvxqo Tjg Max. Speed of tools: 10,000 rpm Counter spindle Max. Pick-up diameter: 10 mm Drive power counter spindle: 1.1 kW Counter spindle speed: 500 - 10,000 rpm Tools for back machining: 4 tools (ER 11) Driven: 2 tools Fixed: 2 tools Speed of the rear tools: 250 - 8,000 rpm Rapid traverse speed: 35 m/min (all axes) MACHINE DETAILS Machine weight: 1,450 kg Dimensions: 1,865 x 775 x 1,695 mm Switch-on time: 68,175 h Processing time: 48,160 h Cutting time: 9,283 h Workpiece counter: 12,950,266 EQUIPMENT - Bar feeder: FMB minimag 20 - HP pump: Büchele SHD 100 with cartridge filter system

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Dcsb Ejvitznobxl Tog Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Dobjvi Igfs Ebxl Tecg Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 3MT2 D/A C2 0789, saw blade diameter: 500 mm, cutting width (max.): 600 mm, pass-through width: 750 mm, saw drive: 110 W, rotational speed (max.): 3,000 rpm, TECHNICAL DETAILS Cutting height (max.): 220 mm Cutting height single-shaft: 160 mm Cutting height double-shaft: 180 mm (but should be higher with max. saw blade diameter of 500 mm) Cutting width (max.): 600 mm Wood length: 2.0 - 6.0 m Passage width: 750 mm Saw blade diameter (max.): 500 mm Speed (max.): 3,000 rpm Saw shafts Saw cut: right and left with one movable shaft each There is a telescopic bushing on the shaft on the right in the direction of travel so that the innermost saw can be moved separately Saw cut option 1: One saw shaft from above Saw cut option 2: 2 saw shafts, top + bottom Saw direction: synchronous Djb Ebxlovi Nrcs Tecg Type: Cobra 3 MT 2+1 Drive Power (total): 350 kW (475.87 HP) Engine power: 1st shaft right: 55 kW 1st shaft left: 55 kW Double shaft: 2 x 110 kW MACHINE DETAILS Total weight: 11,000 kg EQUIPMENT Simple alignment table in front of the system Extension including tunnel