Screw compressor

Atlas Copco GA30+

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Gisdpjx Ih D Tofx Agbsl

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: Giodpfxewlp Hds Agbsl capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, Second hand compressor Atlas Copco GA30VSD+FF. Integrated dryer. Integrated frequency converter. 30 kW. 13 bar. 5.85 m³/min. Godpfjxu Ibcjx Agbjil

Condition: excellent (used), Year of construction: 2000, ATLAS COPCO GA30FF screw compressor with air dryer, serviced Technical data: Gijdpfjxlpnlox Agbol Capacity: 3.84 m3/min Motor power: 30 kW Max pressure: 13 bar Operating hours: 13,546 h Year: 2000 Price: 14,500 net 17,835 gross Compressor is fully functional. Service support is provided. Video link below.

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Technical values: 81.2 L/s, 13 bar. Gsdpfxovmpt Uj Agbsil Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Weight: 520 kg

Condition: excellent (used), - 30kW engine - built-in dryer Giedpfx Ajwlcq Negbsl - Max. working pressure 7.5 bar

Condition: excellent (used), Year of construction: 2013, overall weight: 540 kg, volume flow: 310.8 m³/h, pressure (max.): 8.5 bar, Equipment: type plate available, PROD. ATLASCOPCO TYPE - GA30 S/N - API324380 YEAR - 2013 POWER (kW) - 30 PUMP (m3/min) - 5.18 Godpjqfd U Iefx Agbsil CIS (bar) - 8.5

Condition: like new (used), Year of construction: 2017, operating hours: 23,043 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain TNC 640, workpiece weight (max.): 250 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 35,000 W, Year of construction: 2017 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Milling/turning table nc: Number of pallets: 30 places with robot Table dimensions mm: 450x400 Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/86 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper Equipment Chip conveyor Infrared probe Rinsing gun NC swivel rotary table Preparation for the use of the 3D quickSET Laser tool measurement for measuring tool length and diameter Direct measuring system XYZ Spindle active cooling unit MPC – Machine Protection Control Prepareted for automatation via M65 Paper band filter Machine running times Gjdox Nhraopfx Agbjil Under power: 43989 Spindle Working: 23043

Condition: ready for operation (used), An inspection is possible. Gsdpfx Asn D Hbnegbjil

Condition: good (used), Year of construction: 1999, Year of manufacture 1999 7.5 bar Gedpfx Aswf U A Djgbsil

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: API838388, overall weight: 480 kg, volume flow: 225 m³/h, pressure (max.): 12.75 bar, Equipment: type plate available, We offer: screw compressor, Atlas Copco GA18VSDFF PLUS compressor Technical data: Power: 18.5 kW Efficiency - 3.75 m3/min. Maximum pressure: 12.75 bar, Gedpfx Aov Drmrsgbeil year of manufacture: 2018 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes NEW/USED USED

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; year;2015 mileage;8114h!!! 23500 net 28905 gross Compressor fully operational,ready to work,warranty Gijdpfotqc I Isx Agbel we provide service.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Gijdpfxstqc Nre Agbel Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; year;2015 mileage;7589h!!! 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressed air system consisting of: Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 hours – 15 kW – Max 13 BAR Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, height approx. 2.15 m Almig AKC300 Activated Carbon Adsorber incl. Condensate Drain Valve SPX Flow Technology EDDSU2 Godowz Ul Djpfx Agbeil The system is fully functional and has been regularly maintained. Already dismantled and packed on a pallet. Very good condition, see pictures. Forklift available for loading. Collection only by appointment in 75053 Gondelsheim. Shipping by freight forwarder possible, please inquire with postcode.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; Giedpfxotqc Eyj Agbsl year;2015 mileage;11330h!!! 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.