Screw compressor GA11VSD+

Atlas Copco GA11VSD+

Condition: excellent (used), Year of construction: 2016, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 11 VSD + screw compressor Ljdpfx Afoytyh Hetsad Variable speed drive (inverter controlled) 11 kW motor Capacity: 1.95 m3/min Pressure: 13 bar Year of manufacture: 2016 Operating hours: 9270 hours

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm Lodoycuypopfx Aftoad - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: excellent (used), Year of construction: 2008, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: API161729, total length: 976 mm, total width: 595 mm, total height: 1,212 mm, fuel tank capacity: 500 l, operating pressure: 10 bar, pressure (min.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, For sale: ATLAS COPCO GA 11 VSD FF compressor - Type: GA 11 VSD FF - Year: 2008 - Serial No.: API161729 - Power: 11 kW For sale is a well-maintained screw compressor complete with an air filter and a 500-liter expansion tank. Operating pressure range is between 3 and 13 bar. The unit is fully operational. The machine is connected to the power supply and ready for testing. Ledpoy Ud Ibjfx Aftead

Condition: ready for operation (used), Atlas Copco Complete Compressed Air System – GA26VSD+ + GA18 SP + FX11 + 1500 l Tank For sale is a used Atlas Copco compressed air system as a complete package. System components: Atlas Copco GA26VSD+ Year of manufacture: 2016 Operating hours: approx. 28,000 h Power: 26 kW Max. working pressure: 13 bar Free air delivery: 5.15 m³/min 400 V / 50 Hz / 3 Ph Atlas Copco GA18 SP Year of manufacture: 1999 Operating hours: approx. 37,000 h Power: 18.5 kW Max. working pressure: 8 bar Free air delivery: 48.3 l/s Speed: 3,000 rpm Atlas Copco FX11 Refrigerant Dryer Type: FX 11 (A9) Year of manufacture: 2016 Max. compressed air pressure: 13 bar Connection: 230 V Power: 1.64 kW Compressed air receiver 1,000 l Operating hours according to supplier: approx. 22,000 h Last inspection 2024 Control cabinet / without piping / with accessories as shown in the pictures Condition: Used. Lasdpfoy D Ur Ajx Aftsd Last maintenance and inspection in 2024. Cosmetic condition as shown in photos. Preferably sold as a complete system. Notes: Inspection by appointment is possible and recommended Collection / dismantling / loading by arrangement Sale preferably to commercial customers Invoice will be issued

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Lodpfxexvwcxe Aftoad Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: used, functionality: unexamined, Compressed Air System Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Lsdpsvx Nmfefx Aftsad Control unit ES 6 Incl. 1000 l air receiver GA11VSD+FF, year 2017, operating hours: approx. 20,000 GA18 PLUS, year 2007, operating hours: approx. 58,000 Buyer is responsible for professional dismantling. Forklift is provided.

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Lajdpfxjrx Syde Aftjd Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 Lsdpfx Afjtqqrfotsad cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table load: 1,500 kg, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis +GF+ Mikron Mill E 1200 was manufactured in 2021. It features a spindle speed of 20,000 rpm, HSK A63 tool magazine, and rapid traverses up to 40 m/min. The work table measures 1450 x 600 mm with a maximum load of 1500 kg. Additional features include a Lehmann 4-axis rotary table and a liftable chip conveyor. Consider the opportunity to buy this +GF+ Mikron Mill E 1200 vertical machining centre. Contact us for more information. • Tool magazine: DT30, HSK-A63 • Rapid traverse: X/Y 40 m/min; Z 35 m/min • Table size: 1450 x 600 mm • T-slots: 5 • Spindle cooling system – 20 kHz • Linear scales: MILL E 1200 linear scales • Machine status light Additional equipment • Liftable chip conveyor Laodpfx Aeyb Sifeftod • Chip trolley • Washdown system • Oil separator • Remote electronic handwheel • TS35.10 tool presetter (TNC 620) • IRP40.02 HSK63A measuring system • Lehmann 4-axis rotary table Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Model: SF 15 FF Lodpfxsxk U Dcs Aftsad Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.