New Atlas Copco G7FF air compressor. Latest model

Atlas Copco G7FF

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Iedpfjhkttpsx Ahvetd Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012 Itodpfxjmx Rrle Ahved

Condition: used, mileage: 48,223 km, power: 115 kW (156.36 HP), first registration: 07/1992, overall weight: 10,500 kg, fuel type: diesel, color: orange, tire size: 12,5 r20 mpt, gearing type: mechanical, operating hours: 3,262 h, machine/vehicle number: 3765, Equipment: all wheel drive, crane, differential lock, hydraulics, 1 used UNIMOG 1650 with Hiab 120 loading crane Internal number: 3765 First registration: 04/92 Read operating hours: approx. 3,241 Recorded mileage: approx. 47,821 km Power: 115 kW / 156 HP Permissible total weight: 10,500 kg PTO at bottom 2-circuit hydraulics Iedpefh Nbcofx Ahvetd 24 V electrics Tyres: 12.5 R20 MPT Hiab 120 loading crane 4x hydraulically extendable, radio remote control Lifting capacities: 2.0 m – 4,400 kg 10.1 m – 850 kg 4.6 m – 2,130 kg 11.9 m – 700 kg 8.2 m – 1,080 kg The very low-mounted crane frame ensures excellent stability of the UNIMOG, resulting in very high lifting capacities at the crane. This offer is non-binding. Subject to errors and prior sale!

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Iodpfxog Azmms Ahvstd

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Itodpfx Aew Az Riehvsd

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Ijdpot Apugefx Ahvotd Number of rollers: 2

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Isdpotyaypofx Ahvetd

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Itsdpfx Aorkgy Uehved

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium Iedoxk U Alepfx Ahvetd No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210 Iodpfx Aotpf N Ushvjtd