Thermolift 100

ARBURG

Condition: excellent (used), Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Bsdpfju Dmgqox Aafelc Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Condition: used, Year of construction: 2001, operating hours: 57,430 h, functionality: fully functional, machine/vehicle number: 183899, clamping force: 600 kN, overall weight: 2,330 kg, Arburg injection moulding machine for sale Year of manufacture: 2001 Condition: Very well maintained, regularly and promptly serviced Inspection: Was in operation until recently, currently still connected to power and available for on-site inspection at any time Bjdpfxoxdz I Ue Aafslc Ready for use: Immediately available and fully functional The machine is in very good condition and is ready for immediate use. The machine is sold without tooling and conveyor. More details on request.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) Blsdpfxeyg I Iho Aafsc • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: new, Year of construction: 2023, Clamping force: 320 t Bodpeyg I Emjfx Aafslc Screw diameter: 30 mm Shot weight: 97 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 106 cm3 Type: Multicomponent Drive: Hybrid

Condition: used, mileage: 19,190 km, power: 160 kW (217.54 HP), fuel type: electric, gearing type: automatic, first registration: 12/2023, next inspection (TÜV): 12/2026, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, navigation system, second-hand vehicle warranty, Optional extras: Mica paint / mineral-effect paint Additional features: Bjdpfx Aajwz Ukgsfelc 6 speakers, storage pocket on the front seat backrests, passenger-side airbag, deactivatable passenger-side airbag, driver-side airbag, ambient lighting, power-folding exterior mirrors, power-adjustable exterior mirrors. Adjustable and heated, both, exterior mirrors painted, battery heating system, LED indicators integrated into exterior mirrors, roof rails, roof spoiler in body color, chrome-plated trim strips, Digital Cockpit (digital instrument display), efficiency package, automatic switch-on for headlights / light sensor, electric brake force distribution, electric motor 160 kW (cont. 53 kW), driver assistance system: active lane keeping assistant (LKAS, Lane Keep Assist System), driver assistance system: attention assistant (In Cabin Camera, ICC), driver assistance system: Highway Driving Assist 1.5 (HDA 1.5), driver assistance system: autonomous emergency braking function including forward collision warning (FCA), driver assistance system: hill start assist, driver assistance system: front and rear parking sensors, driver assistance system: driving profile selection (Drive Mode), driver assistance system: high beam assistant, driver assistance system: occupant alarm (RSA), driver assistance system: multi-collision brake, driver assistance system: safety system with automatic emergency call (ERA GLONASS / eCall), driver assistance system: lane following assist (LFA), driver assistance system: traffic sign recognition, extended (cruise control/limiter system), electric rear windows, electric front and rear windows with automatic up/down, chrome-plated window trim strips, Bluetooth hands-free system, heat-insulating windshield, front storage compartment / frunk (trunk, front), LED luggage/cargo area light, luggage compartment cover / roller blind, transmission for electric vehicle, rear cup holder, front cup holder, belt tensioner, LED rear lights, heated rear window, HV battery 65.4 kWh (lithium-ion), induction charging cradle for smartphone, interior mirror with automatic dimming, Isofix mounts for child seat, body: 5-door, automatic climate control 2-zone, head airbag system, adjustable rear headrests, heated tailgate, on-board charger (3-phase), LED light strip at the rear, LED light strip at the front, lumbar support on the front left seat, electric. adjustable, 3-spoke leather steering wheel, heated steering wheel, multifunction steering wheel, steering wheel with shift paddles, height-adjustable steering column, length-adjustable steering column, front and rear LED reading lights, headlight range control, Lifetime MapCare (internet-based services), alloy wheels, rear air vents, rear center armrest, navigation-based adaptive cruise control (cruise control) with distance control (NSCC), navigation system, rear fog light, emergency charging cable (ICCB), electric parking brake (EPB), LED projector headlights, digital radio reception (DAB+), painted wheel arch covers front and rear, standard wheelbase, tire repair kit, tire pressure monitoring system, rear view camera, split/folding rear seat backrest, gear/selector lever (shift by wire), window fogging detection/control, front side airbag, front center side airbag (central airbag), Service system: Online Update OTA (Over The Air), Service system: Plug & Charge, Service system: Remote Services (Blue Link), Height-adjustable front seat belts, Height-adjustable front left seat, Height-adjustable front right se

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C Bsdpfjyg I Egox Aafjlc • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: new, Year of construction: 2023, Clamping force: 500 t Screw diameter: 60 mm Shot weight: 620 g Distance between tie bars V: 920 mm Bjdpfxoyg I A So Aafjlc Distance between tie bars H: 920 mm Shot volume: 678 cm3 Type: Multicomponent Drive: Hybrid Special multicomponent machine

Year of construction: 2005, condition: good (used), Model: Arburg Thermolift 100-2 Type: Granulate drying and conveying unit Drying hopper capacity: 100 L (optional 200 L extension) Heating power: approx. 4.5 kW Blower power: approx. 0.95 kW Bsdpfxjxykr Io Aafolc Air volume: approx. 90 m³/h Conveying height: up to approx. 3 m Feed pressure: approx. 0.055 bar Weight: approx. 150 kg Operating modes: Fresh-air, recirculating-air, optional dry-air module Feeding capability: Can supply up to two injection moulding machines Options: Vacuum loading, dual material manifold, dry-air module with rotor, integration to machine control

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Bodpfxjuykh Do Aafslc Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: excellent (used), Year of construction: 2004, Arburg 520 TV 1300-350 (2004) Clamping Unit: 1. Clamping Force: 1,000 kN (100 tonnes) 2. Opening Force: 115 / 300 kN Blodpfxswp E E Rj Aafec 3. Opening Stroke: 300 mm 4. Maximum Distance Between Platens: 600 mm 5. Minimum Mould Installation Height: 300 mm 6. Tie Bar Spacing: 1,300 mm 7. Maximum Weight of Movable Mould Half: 500 kg 8. Ejector Force: 45 / 175 kN 9. Ejector Stroke: 150 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 230 cm³ Injection Pressure: 1,670 bar

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,300 mm, Handling System Geiger MotionLiner 10.0 XD Stock no.: 503652 Machine/Device type: Handling Manufacturer: Geiger Model: MotionLiner 10.0 XD Year of manufacture: 2020 Handling weight: 10 kg Stroke X-axis: 600 mm Stroke Y-axis: 1200 mm Stroke Z-axis: 2300 mm Interface: EUR 67 Bledpfxsxuhlue Aafsc Accessories: EASYTouch HT320Z

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Bljdpfsygx Urox Aafec Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,300 kN, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Bjdpfx Aasx D E Dyofolc Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 290 unit: 30 / 35 / 40 mm 400 unit: 35 / 40 / 45 mm 800 unit: 45 / 50 / 55 mm Injection Pressure (Max.): 290: 2500 / 2000 / 1530 bar 400: 2500 / 2000 / 1580 bar 800: 2470 / 2000 / 1650 bar Shot Weight (Max. g PS): 290: 97 / 132 / 172 g 400: 141 / 184 / 232 g 800: 291 / 359 / 434 g Heating Output 290: 7.7 kW | 5 zones 400: 9.7 kW | 5 zones 800: 19.9 kW | 8 zones Net Machine Weight: 290: 5600 kg 400: 5900 kg 800: 6350 kg

Condition: used, Year of construction: 2012, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, load hours: 69,990 h, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Bedpexl Hi Tefx Aafelc terms of payment: 100% prior to delivery