Oilfree 160 kW screwcompressor

ALMIG SIMPLEXX 160 LK (8,6 bar)

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Pgsdpoxk U Alefx Ahvoi Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Pgedpfx Aoxdc Uvjhvsi

Condition: good (used), Tweedy / Baker Perkins mixer available for immediate sale, complete with stainless guarding system and feed tanks etc. In nice condition, we think it was rebuilt by Turkington at some point. Ideal for bread making operation or can also be used for making batter (for crumpets, pancakes etc) Various change parts are available from the manufacturer. Pjdsifz Ibepfx Ahvogi

Year of construction: 2018, operating hours: 200 h, condition: like new (used), functionality: fully functional, Very modern and flexible cartoner. Output max. 120 FS/min. Carton size [A x W x H] min. 30 x 15 x 65 mm max.180 x 105 x 250 mm The machine can be adapted to your requirements if necessary Pgsdpfxet Iu H Se Ahvoi

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Pgjdexmkc Tepfx Ahvoi

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Pedpfx Aetndpzshvsgi Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: excellent (used), Year of construction: 2014, We are offering an x2 ATLAS COPCO ZR 400 7.5 compressor with the following specifications: Max working pressure: 7.5 bar Hours: 53000 Input power: 355 kW Rotational shaft speed: 1485 rpm Year of manufacture: 2014 The compressors were removed from a company that ceased operations. Additional Equipment Included: The compressors comes with x2 Atlas Copco air dryer, Model: MD1000 W CE, featuring: Max working pressure: 10.5 bar Pedou Szu Nspfx Ahvogi Year of manufacture: 2014 Please include your price offers directly when reaching out to us

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Mains frequency: 50 Hz Pgjdpfx Aheu Rnzisvji The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Pgsdsv S Eurjpfx Ahvji Sold as seen

Year of construction: 2017, condition: ready for operation (used), Max. Output: 12 cycles/min, film widths: 320/360/420/460/520mm, take-off lengths: 200 - 420mm. Max. Drawing depth: 190mm, top film: max. 300µm, compressed air: min. 6 bar. Including two format sets (round cups and square cups), as used for dips for chicken nuggets or ready-made salads. Outer dimensions X/Y/Z: approx. 6200/1200/2200mm, weight: approx. 2800kg incl. accessories. On-site inspection is possible. Pgedpfjry T T Rex Ahvei