Screw compressor

Atlas Copco GA110VSD

Condition: used, Year of construction: 2014, operating hours: 39,000 h, Atlas Copco compressor, in perfect working order and exceptionally quiet (we are official dealers). Bwedszc Hmhopfx Al Ror Key features: Maximum pressure: 10 bar Flow rate: 19200 liters/minute Power: 110 kW / 150 hp

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW Bsdpfx Aeymznhel Rowr >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2012, operating hours: 106,362 h, functionality: fully functional, Premium screw compressor Atlas Copco GA110VSD. Bwjdpfoul U Tyox Al Ror Year of manufacture 2012. New stage at 50,000 hours. With WRG. 8.50 bar with 20.70 m3/min.

Condition: excellent (used), Year of construction: 2011, SCREW COMPRESSOR ATLAS COPCO GA110VSD 120Kw 2011 Screw compressor ATLAS COPCO GA110VSD machine with inverter and heat exchanger Technical data: capacity: 18.72m3/min; 120 KW engine; max pressure 10 bar; mileage; 17483h Bodpfx Ajtqdlpol Rewr year; 2011 Fully functional compressor, ready to work, warranty we provide service.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min Bsdpfxozbh U Ds Al Rowr • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Bodpfx Asy Duy Hsl Rswr Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Bedpfx Aewa Iz Ael Rswr Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Bwodpfxor Dd H Sj Al Rer

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Bwodpfxjtylazo Al Rsr Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Bjdpfxerlk Dcj Al Rowr