Industrial DTG printer

Aeoon Maikuro

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100810261, type of cooling: water, SHINOHARA 75 VP AMBIDEXTROUS (1+4 COLORS) Rodpfx Aetvmq Nedajn CIP3. AUTOMATIC CHINCH PASS AUTOMATIC WASHING. UV LAMPS. WATER COOLER WITH AUTOMATIC ALCOHOL MIXING PH. AUTOMATIC METERS. WASHING ROLLER WINDER DISTRIBUTED WITH THE MACHINE. FLOOR FAN. 2 CALIBRATION DEVICES 20 SPARE CYLINDERS. PRINTING 4600000

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Rodpfxocx R Dds Adaen Capacity 3000 l juice per hour (depending on juice temperature).

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Rjdpfsur Hfzsx Adajn

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Rsdpfx Ajtz H T Dodaen

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles Rjdem Ak R Uepfx Adaon drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization

Condition: like new (used), Year of construction: 2018, GM - FB330 Finishing Solution Year of Manufacture: 2018 _____ Machine Specifications and Equipment: HIGH-PRECISION FINISHING MACHINE  Max. web width 330 mm  Min. web width 50 mm  FLAT BED HOT FLOW PRESS UNIT  Speed 6000/H embossing or 10-15m/min  Web width 110mm - 330mm  Substrates 50-200um  Label paper 60-120 g.  UPM Vellum natural wine paper. RAFLACOAT RP48AT semi gloss paper  All other substrates must be tested by GM  Polymer (blind embossing ONLY)  Sheet thickness: 5-10mm. 7mm is standard  Backing plate, self-adhesive rubber (1-3mm). SH65  Plate size and type 304.8 x 330mm. 5-9mm magnesium  Plate pressure 30 tons  Foil feed transverse and longitudinal direction (rotating tower)  Temperature contr. 80°-130°C  Heating time 20 min.  SCREEN PRINTING UNIT  Speed 4000/h overlays or 5-15 m/min.  Web width 110mm - 330mm  Frame size 660mm x 500mm  Frame type 30mm x 30mm aluminum frame  Print area 330mm (length) x 330mm (width) MACHINE: Fully servo-driven line with web tension control. Modular design can be equipped with e.g. hot air drying and inkjet, etc. Modern single-sided housing for easy retraction and maintenance. 1. UNWINDER 2. WEB EDGE CONTROL 3. FLAT BED SHEET IMPACT UNIT 30 ton high precision flatbed unit delivers superior blind embossing and hot foil quality Servo Drive System ensures consistent pressure and embossing time at all speeds Integrated foil saving function Swivelling foil tower can be used on both sides A single module for blind embossing and/or flatbed hot foil The system uses magnesium, brass/sheet metal or polymer plates Rsdpfxevvmnns Adajn Plates can be changed while hot using a carriage system 4. SCREEN PRINTING UNIT Servo register system for print marks or optional label distance sensor Pneumatic squeegee with servo movement 5. REWINDER Rewinder for roll diameters of Ø600mm (depending on job/material) Electronic control of speed, position and torque Automatic control of the rewind tension for every speed and all rewind diameters Pneumatically replaceable rewind shaft Ø 76mm Inner and outer winding

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Rjdpfx Aovncifsdasn Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg

Condition: used, functionality: fully functional, The SMF COMBI 400 is an automatic blow molder designed for the efficient and high quality production of PET bottles. This machine combines advanced technologies to offer continuous, accurate operation with minimal manual intervention, ideal for bottling plants requiring flexibility and performance. ADVANTAGES OF HS AND COMBI SERIES: • Low energy consumption • Modular construction • Silent work • Space saving, compact design • Easy change- overo f bottle size and types of neckrings • Advanced PLC control system with user friendly interface • Built-in memory of the PLC saves parameter sets required to produce different bottle sizes. • Pyrometric temperature measurement – Power Wizard KEY BENEFITS • Proven system working in hard environmental conditions • Powerful heading unit with precise controller and convenient adjusting mechanism • Minimum transfer space for the air distribution system • Simple, robust and durable operation MAIN PARAMETERS Blowing air quantity (25 BAR): 3.46 m3/h Redpfx Adswny Eijaon Mold material: FORTAL

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Rsdpfxsrww E Is Adaen Manufacturer: COSMO Model: ST-99 Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Rjdpfx Adok Rkpnsaon Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Cleaning liquid full. Included with the used Brother GTX PRO Bulk : 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 13500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€