Combination machine

Adolf 3w1

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation Fgodsgr Er Sepfx Ab Tok feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Fgedpjh Nvfnsfx Ab Tjk Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment - Motor power 5.5 kW (7.5 HP) Vario - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm Fgedpsw Rc H Hefx Ab Tsk

Condition: used, Year of construction: 1976, Serial number: 77706872xxxx Fgedjwi R Epopfx Ab Tok Please contact ATS Norway for more information Please provide reference number upon request: 20316 Specifications: Model year: 1976 Weight: 13,000 kg Tires: See pictures for condition Bucket included Ready for delivery Description:Hanomag 55C wheel loader from 1976.The machine worked when it was parked, but has been standing still for several years, repair cost to be expectedIt har a wheel where air leaks out.Can be delivered at short notice. Total Weight: 13000

Condition: used, Year of construction: 1974, Please contact ATS Norway for more information Please provide reference number upon request: 20713 Specifications: 1974 model Hourly rate is uncertain Weight: 10,400 kg Tires (see pictures) Chains Okay bucket Width: approx. 2.5 m Maintenance is taken care of by owner Fedpewq Uygjfx Ab Tsgk Ready for delivery Notes: Bad battery Owner says it works, but probably needs some maintenance. Own weight: 10400 Total Weight: 10400 Width: 250 Model: LM 846

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Storage location: Nattheim Fgjdpfx Absv I Eats Tek

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of the cutting unit (cm)175 * Weight without cab (kg)1700 * Grain tank capacity (hl)6.5 * Type MF30-6 Fgjdpfx Abjvhvf To Tok * Serial number 0D7758 * Year of construction 1967 ----Internal vehicle number 8144----Irrors and prior sale reserved

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Record Power PT 107 Surface Planer Thicknesser with a planing width of 265 mm. The machine is in its original condition, so you receive the full warranty. Technical data: - Planing width: 265 mm - Planer table length: 1,110 mm - Planing depth (surfacing): 3 mm - Planer fence tilts up to 45° - Cutterblock diameter: 75 mm - Speed: 4,000 rpm - Maximum thicknessing height: 190 mm - Thicknesser feed width: 265 mm - Thicknesser feed rate: 5 m/min - Maximum planing depth (thicknesser): 2 mm - Motor: 2.3 HP / 230 V - Power consumption: 2,200 watts - Extraction port: 100 mm - Weight: 162 kg One unit of this planer is available at each location: A-5431 Kuchl and A-8561 Söding, and can be inspected during our business hours at any time. Subject to prior sale! Shipping (by freight): Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT Fgodpfeuv Exiox Ab Tsk Related terms: surface planer, thicknesser, planer, surfacing, thickness planing Reference: ZXPT107-A

Condition: excellent (used), Year of construction: 1989, Pinheiro SFM1-900 - Wheel diameter 900 mm - Motor 11 kW Fgsdpfotwrqbox Ab Tok - Height of the feeding wheel 24 cm - Belt length from 620 to 645 cm

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" Fgjdjdzw Hwjpfx Ab Tek space requirement: 850 x 640 x 780 mm