Coordinate measuring machine

Aberlink AXIOM TOO 900 CNC

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm Ksdpfx Aoyzza Iebfedn tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 182823025, functionality: fully functional, operating hours: 2,417 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 400 kg, controller manufacturer: Heidehein, overall weight: 13,000 kg, controller model: TNC640, nominal power (apparent): 60 kVA, rapid traverse Z-axis: 1,417 m/min, rapid traverse X-axis: 1,417 m/min, rapid traverse Y-axis: 1,417 m/min, workpiece diameter (max.): 500 mm, operating hours of spindle: 2,417 h, Equipment: documentation/manual, Perfect running machine, 5 axle G6 Axile. Ksdpfx Ajvumzxebfsdn Can be shown in running condition.

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Kjdpfew H Au Rsx Abfedn

Condition: good (used), functionality: fully functional, The high-quality 3D composite printer from the US company Markforged can be used to print extremely accurate, strong and durable parts reinforced with long carbon, glass or Kevlar fibers, inexpensively and quickly. Kdedpfjwcyycex Abfen

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating hours: 1,300 h, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 80, controller manufacturer: Heidenhain, total height: 3,230 mm, total length: 3,840 mm, total width: 3,800 mm, overall weight: 12,000 kg, controller model: TNC 640, torque: 112 Nm, spindle motor power: 40,000 W, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rotary table diameter: 600 mm, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, table load: 600 kg, tool diameter: 125 mm, tool length: 300 mm, tool weight: 8,000 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The G6 model is a compact, vertical machining center designed for the intelligent machining of small to medium-sized workpieces with high demands on geometry and accuracy. The basic structure (U-shaped gantry design) made of Meehanite casting enables an even distribution of forces during machining and excellent accessibility to the work area. The two symmetrically arranged and synchronously running ball screws in the Y-axis ensure a smooth and jerk-free feed movement under load. These two features are unique for this machine size and therefore offer decisive competitive advantages. All AXILE models include their patented SMT™ (Smart Machine Technology) system as standard, with features such as spindle vibration monitoring, thermal compensation and adaptive feed control. Ksdpformm Hajx Abfsdn This demonstration machine is already equipped with the ART™ monitoring system (recognizable by the "i" after the model name). Special equipment: Automatic kinematics control, BLUM measuring probe (integrated in the table), Heidenhain TS-740 workpiece measurement, chip flushing in the work area, coolant supply through the spindle (40 bar), oil skimmer. Available at short notice. Only while stocks last.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours Ksdpfx Asw Imk Rebfodn There are available all model materials licences available in 2019. New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, AXILE G8 – High-Performance 5-Axis Machining Centre for Maximum Precision The AXILE G8 belongs to the top tier of modern 5-axis machining centres and is specifically engineered for demanding precision applications. Its integrated gantry design, high dynamic rigidity, and advanced automation options make it ideal for tool and mould making, aerospace, medical engineering, as well as complex single-part and small batch manufacturing. Technical highlights • 5-axis gantry construction for superior stability and minimal vibrations • High-dynamic linear drives / precision ball screws (depending on configuration) • Robust spindle (18,000–20,000 rpm, HSK-A63) with high power density • Swivel/rotary table with direct drive, perfect for simultaneous 5-axis machining • Large operating envelope for complex workpieces • Tool magazine capacity: 40–120 positions, depending on specification • Available with Siemens or Heidenhain control (depending on version), ergonomic and user-friendly • Rigid portal construction for optimal thermal stability and consistent precision Typical technical data (model dependent) • X-axis: approx. 670 mm • Y-axis: approx. 820 mm • Z-axis: approx. 600 mm • Table diameter: approx. 600 mm • Table load capacity: up to 500 kg • Spindle speed: 18,000 – 20,000 rpm • Tool holder: HSK-A63 • Magazine size: 40 / 60 / 120 tools • Control: Heidenhain TNC 640 or Siemens 840D sl (Values may vary according to year of manufacture and configuration.) Equipment & options • Full simultaneous 5-axis machining • Through-spindle coolant (IKZ) • Automatic tool measurement and breakage detection • Renishaw probing systems • High-pressure coolant system • Chip conveyor and internal enclosure rinsing • Modern safety enclosure & automation interfaces Application areas The AXILE G8 is ideal for: Kdedpsxxh A Isfx Abfjn • Tool & mould making • Aerospace • Medical technology • Automotive prototyping • Mechanical engineering & precision component manufacturing Description This 5-axis machining centre stands out for its combination of dynamics, rigidity, and ultra-precise machining performance. Thanks to the gantry structure, the machine remains extremely stable even during long runtimes and high feed rates. Advanced thermal management ensures consistent accuracy, and the modern control system provides efficient programming and quick set-up times. The AXILE G8 is the perfect solution for companies seeking a reliable, powerful, and future-proof 5-axis machine. Currently, machines with Siemens and Heidenhain controls are in stock, also available with a 600mm table size.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23-000209, type of input current: AC, input voltage: 230 V, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, total width: 1,500 mm, total length: 1,600 mm, total height: 2,100 mm, workpiece weight (max.): 100 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, power of the servo motor: 1,000 W, Equipment: documentation/manual, type plate available, We offer this used Carl Zeiss GOM Metrology ATOS ScanBox 4105, manufactured in 2023. Model: ATOS ScanBox 4105 Serial number: 23-000209 Year of manufacture: 2023 Mains voltage: 230 VAC Frequency: 50/60 Hz Phases: 1 phase Power: 1 kW Sensor: GOM ATOS Q, 8 megapixels, and 270 mm measuring volume Kodpfx Aoy U R S Hobfedn Robot: Fanuc Max. component size: Ø 500 mm, height 500 mm Dimensions (L × W × H): 1,600 × 1,500 × 2,100 mm Made in Germany If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Kdjdpfxsyap R Re Abfsn Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring Range Kodpfx Abey Ewgxsfsdn X Axis: 1,000 mm Y Axis: 3,000 mm Z Axis: 800 mm Granite Guides Air-bearing Axes Measuring Accuracy Linear measurement deviation approx. 1.3 µm plus L/400 depending on configuration and calibration status Probing Systems Renishaw probe heads possible Touch trigger and scanning PH10, TP20, SP25, SP80 depending on equipment Workpiece Weight Permissible table load up to approx. 2,000 kg depending on configuration Control CNC control with handheld operating unit Software Metrosoft CM version 3.112 WENZEL Quartis R16 Electrical Supply 230 V 50/60 Hz Power consumption approx. 1 kVA Pneumatic Supply Compressed air 6 to 10 bar filtered and dry