Used Pumps for sale (153)

Year of construction: 1977, condition: used, Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year built: 1977 Material: mild steel Driving force: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 liters/min Operating pressure: 100 bar Operating voltage: 380/660 V Type of protection: 44 Flanges: DN 65 Condition: Used Message: Frequency range: 50 Hz, protection class: 44, flanges: DN 65 Price: on request Laodpfx Abjh Unlke Ueh

Condition: used, Centrifugal pumps for pumping liquids. The liquid enters the housing through the suction flange. The impeller creates a negative pressure in the centre of the suction pipe, as the medium is pressed to the edge of the casing by centrifugal force. Here, the liquid rises due to the higher pressure and leaves the casing via the pressure flange. Used centrifugal pumps from various manufacturers, with different key figures and equipment. Both mobile and stationary centrifugal pumps are available. Capacity: 15 - 1080 hl/h Delivery head: 5 - 140 m Power factor: cos ϕ Speed: 1435 rpm - 2930 rpm Power: kW Voltage: 22 V Current: 3 - 43 A Frequency: 5 Hz Capacity: 1080 hl/h Pumping head: 140 m Drive: 3520 rpm Performance factor: 0 cos ϕ Ljdpfx Abovcqyuj Ueah Power: 0, - kW Current: 1,1 - 117 A Voltage: 22 V Frequency: 5 Hz

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 24000L/h - 7200L/h. - Lifting height max: -166-72m - Motor power: 11Kw Laodpoviynbsfx Ab Ujh - Rotational speed: 2900 rpm

Condition: used, Dos P016, Scheugenpflug, piston dosing system Lsdpor Izd Uefx Ab Ujah Model: Dos P016 Condition: Used

Condition: used, 2 identical sludge pumps 1 x with 90 kW electric drive unit; 1 x without drive motor Impeller diameter: 600 mm Inlet diameter: 250 mm Outlet diameter: 200 mm Ledpfxstpplro Ab Usah

Condition: as good as new (ex-display), System components: • Control unit Dos SCP210 • Material feeding unit A220 1C • Dispensing head Dos GP-1C Complete adhesive application system designed for sealing covers or lids with single-component materials like Loctite. Features precise dispensing control, ergonomic material feed with vacuum follower plate, and clean, repeatable application. Ledpfowdtd Rox Ab Usah

Year of construction: 2007, condition: used, Name: Eccentric Screw Pump Manufacturer: Netzsch Type: NMO45BY04S18B Year built: 2007 Lasdpfxehukc Io Ab Ush Material: mild steel Driving force: 7,5 / 8,6 kW Max. operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h Operating pressure: 16 bar Operating voltage: 400 / 690 V Type of protection: IP 55 Condition: Used Technical documentation: no Price: on request

Year of construction: 2016, condition: ready for operation (used), 1. Unit pump system based on pump „TAPFLO” SRT 200-OOPQ-GBB-TC-A - ( IMG_1502,1501,1505,1510,1511) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 45KW electric motor, Inverter ABB) - electric heating pump system up to 120 deg. C` (Surface heating of the pomp head) - efficiency abt 200 t /h - assembly year 2016 - working abt 1000hrs 2. Unit pump system based on pump „„VIKING” type N34 (IMG 1493,1496,1501) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 35KW electric motor, Inverter ) - oil heating pump system up to 150 deg. C` - efficiency abt 150 t /h - assembly year 2016 - working abt 1000hrs 3. Pumps „TAPFLO” SRT 200-OOPQ-GBB-TC-A (2 pcs) year of production 2014 - spare pumps for unit no 1 4. Unit pump system based on pump „„VIKING” type N34 ( pump in good working condition ,but in order to increase efficency elements inside pump to be reconitioned) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 35KW electric motor, Inverter ) - Electric heating pump system up to 120 deg. C` - efficiency abt 70 t /h - assembly year 2013 5. Container boiler - quick steam generator Loos DF 400 embedded in conteiner 20’ included fuel tank inside conteiner (IMG 1522,1523,1524,1527,1529,) for heating of small circulation heating system in railtanks and simultanously heating disch walves of railtanks - low generator and burners mileage - new (not used) water treatment station 6. Collector pipe 60 m long DN 250 insulated with mineral wool, covered with steel plates (5 pcs 12 meters each one) - 6 inputs DN100 (connetions to railwagons), ended by valves DN 100 - 3 outputs to pumps DN150 ended by valves DN 150 7. Set of 6 flexible hoses DN 100 made of stainless steel to connect collector pipe with railway tanks 8. Flexibe hoses DN150 to connect collector with pumps - 2 pcs/ 1m long - 3 pcs/5m long Attached pls find loading scheme of our portable station (IMG 1725) A – flexible hose B – Unit pump system C – Steam Generator D – railway tanks (6 pcs) Lodpfof Sad Uex Ab Uoah Pictures will follow in separate mail We wld like to sell all elements of our bitumen portable pumping station in one package . Estimated value of described complete mobile loading station as pckg on level of abt EUR 100.000,-. but we are flexible to final price. We wld like to point out that this heavy duty equipment offered by us has been tailor made for our needs in cooperation with our Scandinavian partners, where many years of their knowledge and experience has been used .Equipment is reliable in difficult working conditions , very efficient and at the same time very simple to use. It took us some time to complete the entire portable pumping station. Described equipment is very low used and ready for operations at any time

Condition: new, Selling Lowara Pressure Booster Hydrogen Kit / New. Lsdpsvil Iaefx Ab Ujah

Condition: used, JE1 110G10ET20, Varisco, centrifugal pump Model: JE1 110G10ET20 Lajdpfx Abeutcmdj Ujh Condition: Used

Condition: used, functionality: unexamined, lot consisting of 2 pcs IL50/170-1.1/4 centrigugal pumps and 4 pcs IL32/160-3/2 they were running until decommissioning Laodpfewivyfex Ab Ueh

Condition: as good as new (ex-display), functionality: fully functional, Gap filler dispensing system – Scheugenpflug LP804 + P300 + GP-1C – immediately available High-performance system for precise processing of thermal pastes, gap fillers or potting materials. Includes material prep unit with vacuum, dual-component metering head, and control logic. Used, fully functional and in very good condition. Lasdpswdqvwjfx Ab Uoh

Year of construction: 2006, condition: used, Name: Eccentric Screw Pump Manufacturer: Netzsch Type: NM031BY04S24B Year built: 2006 Material: mild steel Driving force: 3 kW Max. operating temperature: 20 C Dimensions: L 1700 x W 300 x H 500mm Empty weight: 150 kg Speed: 79-262-719 rpm Flow rate: 0,2 - 1-3 m3/h Operating voltage: 400 / 690 V Type of protection: 55 Flanges: DN 65 Ljdpfxoh Tkicj Ab Ueah Condition: Used Technical documentation: no Price: on request

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Laodpfx Aorfdtteb Ush Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 36000L/h - 14000L/h. - Lifting height max: -39-19m Ledpfsvilv Rjx Ab Ujah - Motor power: 4 kW - Rotational speed: 2900 rpm

Condition: used, 101570131, SV3305/1F110T/P / SV3305 1F110T P / SV33051F110TP, Lowara Multistage Centrifugal Pump Model: 101570131 Type: SV3305/1F110T/P Laodoq S Tz Sepfx Ab Ujh Condition: Used

Condition: used, TECHNICAL SPECIFICATIONS - Marc pump - Pig tail Laodpfx Abswk D Sfj Ush - Make : PERA - Capacity : 40 T/H

Condition: used, System: hydraulic piston membrane pump, used Laodpsib A Eqofx Ab Ush Type: REWA/Abel HMD-G-50-0500 Article no.: A51-288 Construction: long Flow rate: max. 50 m³/h Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, Version: with control cabinet and frequency converter

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Lsdpfx Abjqabias Usah Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: used, E25TTZ, PSG Germany GmbH diaphragm pump, Almatec Laodpfxsq S Udio Ab Ujh Model: E25TTZ Condition: Used

Year of construction: 1993, condition: excellent (used), 2 pieces centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Delivery rate: 5,5 l/s (19,8m³/h) delivery head: 214 meters ( 21,4bar) max. temperature: 130°C Seal: mechanical seal with sealing water connection electric motor: VEM driving power: 30 kW Lodpfx Abjibwarj Usah speed: 2935 rpm

Condition: used, H482042K, MPN 190 / MPN190, Schmitt-Kreiselpumpen GmbH centrifugal pump Model: H482042K Laedpsq S Tzvsfx Ab Ush Type: MPN 190 Condition: Used

Year of construction: 1995, condition: excellent (used), 3 pieces centrifugal pumps Sulzer MB 40-160/5 flow rate: 32m³/h delivery head: 147m Laodped Sybpjfx Ab Ujh max. temperature: 130°C seal: mechanical seal with sealing water driving power: Siemens 22kW speed: 2950 rpm

Condition: used, 48864995, ETALINE-GN 65-250/404 / ETALINE GN 65 250 404 / ETALINEGN65250404, KSB SE & Co. KGaA inline pump Model: 48864995 Type: ETALINE-GN 65-250/404 Ledpfsq S Tutox Ab Uoah Condition: Used

Year of construction: 1995, condition: excellent (used), 2 centrifugal pumps Sulzer MB 80-230/3 flow rate: 79-89 m³/h delivery head: 240-230m Lsdpfx Aod Sybusb Uoah max. temperature: 130°C Seal: mechanical seal with sealing water connection drive power: Siemens 90kW speed: 2980 rpm