Condition: good (used), Year of construction: 2005, KUPER SHRINK TUNNEL DUPLEX Manufacturer: KUPER Type: ST/I-1400 Year of construction: 1987 Serial number: 594 Working width: 1300 mm Role Holder: Yes Electrical connection: 400 V Overall size, H: 3500mm Duolillekn Rz Heptot Overall size, W: 2350mm Overall size, M: 1850mm Vv 2 blow-off units Power: 59kW Temperature range 230°C Duplex 2100/650 film input station vv film holder Swivel arm with chain hoist sealing rod Length 2100mm "Siemens" control panel Overall Size: 3000*2000*2300mm További információ erről a forrásszövegrőlTovábbi fordítási információhoz forrásszöveg szükséges Visszajelzés küldése Oldalsó panelek

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: SA13G00207, type of input current: AC, input voltage: 380 V, input current: 25 A, net weight: 60 kg, Equipment: documentation/manual, Nordson Mesa hotmelt adhesive unit, in a good fully working condition. Djlilewc S D Holpteut This hotmelt unit has 6 hose connections (Ni120) and a tank capacity of 13.6 liters. The hotmelt unit is internally and externally cleaned, checked and fully functional

Year of construction: 2019, Condition: excellent (used), Functionality: fully functional, Orbit 12 Very good condition Dolswc Rtgsillptout Including approximately 4 meters of belt conveyor at the inlet and outlet. Can also be delivered and commissioned for an additional charge.

Condition: good (used), Year of construction: 2008, Here we offer a high-performance packaging machine from a European manufacturer for tape widths up to 50mm. Maximum carton dimensions approx. width: 500 mm Height: 500 mm; Length: unlimited - No settings required for different cardboard formats. Dujlillswc Itdsptot - Top and bottom closure on both sides. (Bottom seal must be retrofitted. -Lateral transport drive. -Infinitely adjustable contact pressure for automatic width and height adjustment -Working height of the machine can be adjusted. -Output of up to 800 cartons per hour. -Transport speed up to 20 m/min.

Condition: refurbished (used), Bosch VRM 6040 Capping machine, closing machine, capper, can sealing machine, can seamer Including complete lid feeding system Duolilswc Em Islptet The machine is located in Germany at our contract manufacturer. The machine is high-performance and has four heads. It can run at up to 120 cans per minute, but we ran it at 30 per minute. The machine is currently set to process 400 ml Obeck cans with (I believe) 89 mm lids, but the setting can be changed. The machine has always been serviced and works perfectly. Capacity: 120 cans per minute The machine is in perfect working order and can also be tested on-site. The only reason for the sale is the change in packaging for our product.

Condition: good (used), Functionality: fully functional, Equipment: documentation/manual, Orgapack battery strapping tool, type OR-T 250, incl. 14.4 V battery and quick positioner. Dsliljuqin Aelpteut For 16 mm PP straps, tensioning force 900 - 2500 N, used fully functional

Year of construction: 1988, Condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Stepless speed adjustment, forward/reverse. Djlillpsmv Hy Hjtout 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: good (used), Year of construction: 2017, machine/vehicle number: LPOK_PAR_2017/1, Box Packaging Palletisation Line A line made to order in 2016 made by PAR SYSTEM. Includes many electronic components. Line little used, complete tables with rollers, motors all fully operational. Complete with switchgear ( only two inverters are missing as seen in the photo ) , control panel . The line folds cartons on a pallet. Dslillslqwzajptout

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: VD 01.06.012, total length: 4,500 mm, total height: 1,570 mm, total width: 2,400 mm, temperature: 240 °C, Equipment: documentation/manual, KALLFASS Universal 1600 NT shrink tunnel for sale in good, working condition. Manufacturer: KALLFASS GmbH Type: Universal 1600 NT Year of manufacture: 2006 Maximum tunnel passage height: 500 mm Maximum tunnel passage width: 1600 mm Length of heated tunnel hood: 2500 mm Maximum temperature (infinitely adjustable) [°C]: 240 Extended tunnel outlet: 1000 mm Adjustable working height: 830 - 900 mm Product transport: Rod chain conveyor, silicone-coated rods Installed heating capacity (consumption in continuous operation approx. 40%): 60 kVA Rated power / rated current at 400 V: 68 kVA / 98 A (in stand-alone operation) Machine dimensions in mm (length x width x height) Approx.: 4500 x 2400 x 1570 Dueliewcw Ttjllptjt Further information available upon request. Viewings and demonstrations are available at our premises by appointment.

Condition: good (used), Functionality: fully functional, A good used Auger filler Dusliowcrlwellptot

Condition: used, Functionality: fully functional, High-performance labeling machine from Herma for head and side labels. The machine is located in Germany at our contract manufacturer. Performance: 100 labels per minute We used it to label round cans (400ml). However, it can also be used for any other cans and bottles. The machine applies the label all the way around and also to the lid. The machine has multiple labeling heads, so the label is simultaneously applied all the way around the can/bottle and also to the lid. The machine is in perfect working order and can be tested on-site. The sole reason for selling it is to change the packaging of our product. Djlillewc D Dreptout

Year of construction: 2024, Condition: as good as new (ex-display), Functionality: fully functional, TECHNICAL DETAILS: Control panel with 7'' color touch display Turntable / base frame Ø 1,500 mm Max. Pallet dimensions: 800 x 1,200 mm Max. Load capacity: 2000 kg Mast design Wrapping height (pallet included): 2,450 mm Height of turntable 75 mm Duslilotr Ut Islptot Height query via light sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled film carriage speed up/down Fall protection for the film carriage Emergency stop switch in accordance with CE regulations Push button for switching on the machine and start & stop function in accordance with CE standards Ø 22 mm Signal tone at cycle start and at cycle end Indicator light integrated in the machine mast ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - Cross winding (up/down) F01 - 02 - Single winding (only up or only down) F01 - 03 - Winding cycle with preset start and stop height F01 - 04 - Fast wrapping cycle with limited or no film overlap) F01 - 05 - Layer wrapping cycle for increased film overlap F01 - 06 - Economy wrapping cycle (to save wraps) PARAMETERS CAN BE SET VIA THE CONTROL PANEL: 99 storable wrapping programs ! All function parameters can be set via the display Infinitely variable turntable speed 5-12 rpm Film carriage speed up and down independently adjustable from each other 1.3 up to 5.4 m/min Number of wraps at the pallet base (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Intermediate windings FILM CARRIAGE TYPE "PS" (POWER STRETCH) Motorized pre-stretching system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick insertion system IEF for easy film roll change Film specification Max. Outer diameter Ø300 mm - Height = 500 mm - Core Ø76mm

Condition: good (used), Year of construction: 1992, type of input current: AC, Rationator CS650 automatic disc dispenser, sorting machine Fully automated, variable dosing speed. Stainless steel. Harness: Rationator CS850 Duelillpoukha Dstot

Condition: good (used), Year of construction: 2012, machine/vehicle number: 10154257, SACMI TS43 stacker Delillswcqtaopteut

Condition: good (used), Functionality: fully functional, SPK 4-35 II Delillot Hwg Ssptjut

Condition: reconditioned (used), Functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Duolilewcnqcolptst Further technical info => check photos Please phone re price negotiations

Condition: used, Fully automatic can unscrambler/bottle unscrambler from Tölke, including feeder. Perfectly functional, used in our production until recently, and we sold it solely due to a change in packaging for our product. Dolillpowc Dzdstout 60 pieces/minute Adjustable to various formats, currently set for 400 ml round cans. Can also be used for bottles and other cans of any type.

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, Now there is an opportunity to acquire a Filma FP10 Ultra from 2022 – a robust and user-friendly semi-automatic stretch film machine that is perfect for safe and efficient wrapping of palletized goods. Dujlillswcnnnoptot This model is equipped with a ramp and an intuitive electronic control panel that makes it easy to adapt wrapping cycles to specific needs. With features such as automatic pallet detection and soft start, the machine offers both stability and safety, which contributes to a more efficient and reliable work process. The machine is in good condition and has been used in clean and grateful environments. A perfect solution for businesses that want to optimize their handling of goods and ensure a cost-effective and sustainable solution for packaging. Shipping is additional. Model year:2022 Dimensions: Height: 2.35 m Width: 1.5 m Length: 2.15 m Technical information Manufacturer: Filma Model: FP10-Ultra Model year: 2022 Height: 2,450 mm Maximum height of pallet: 2,200 mm Diameter of plate: 1,500 mm Maximum weight: 2,000 kg Power supply: 400V 50HZ

Condition: like new (used), Year of construction: 2013, Brand: POLYPACK POLY JUNIOR 2080TL shrink wrap tunnel year of production: 2013 Automatic shrink wrapping machine with motorized conveyor. product dimensions max: 800x600x600mm product dimensions mini: 200x50x50 mm Power supply on the right Output approx. 7-10 cycles / minute Working height: 850 mm Energy: 30 KW / 380 V three-phase / Compressed air 5-7 bar Product sensor cell Dslillpshv Sldsteut Motorized upper and lower coil unwinder Schneider display Schneider PLC Film reel: - 35-90 microns - maximum diameter 400 mm - maximum width 600 mm Tunnel size Ho 1500 x W 800 x Ma 600 mm stainless film welding width: 800 mm Stainless steel structure machine length:

Condition: good (used), Year of construction: 2007, age 2007 banding device computer control with digital display mobile sub-frame Delewagr Tjillpteut Delivery time: immediately

Year of construction: 2003, Condition: good (used), Brand: Kallfass Model: KW 5050 Universal Year: 2003 welding frame dimensions: 500 x 500 mm maximum film roll width: 650 mm Working height: 840 - 950 mm Passage height: 100 - 200 mm Power supply: 230 V three-phase current Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Enclosure dimensions: 1550x1400x950 mm Dujljha Unyoillptot

Year of construction: 1993, Condition: good (used), Manufacturer: Bedo type: VA 975 Vehicle number VA 975.1.52243, Serial number: 4613 Year of manufacture: 1993 Performance: up to 15 cartons/minute. Duelokn R Ucsillptjt Box size: Length: 200 - 450 mm Width: 160 - 350 mm Height: 80 - 500 mm. With hot melting device Nordson Type 3100V Machine dimensions WxDxH: 2100x3000x2300 mm

Year of construction: 1999, Condition: excellent (used), Techstone semi-automatic pallet wrapping machine, for sale in excellent condition made by TECHSTONE year of manufacture: 1999 Semi-automatic machine, with mechanical/automatic preload manual and 3 preset workflows winding height 2000 mm Rotary table diameter: 1,500 mm Load weight: 1200 kg voltage: 400v 50Hz 1300 watts 3 phases film cylinder diameter 300 mm / film height max. 500 mm Dolillpemxkhzetout

Condition: excellent (used), Year of construction: 1998, bedo carton erector type VA 988 with Nordson 3400 Hot Melt Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Duoljifkbxjillptjt Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: defective spare-parts repository (used), Year of construction: 2007, machine/vehicle number: ct1331, The belt tensioning rod is missing exs-108 frame strapping machine, automatic strapping due to the robust design, easy handling and handling of the automatic frame strapping machine. Due to its high performance and wide frame size, it is particularly suitable for individual use, with often varying packaging sizes. frame dimensions: 850 mm (width) x 920 mm (height Strap width: 9-15 mm Speed: 26 cycles per minute (for 50 Hz) Duelillpeh D Hqyjtot tape adjustment 8-15 mm; Set to 12 mm, standard automatic PP tapes Power supply: 230V 50 Hz. Electrical power: 1 KW String: 10-70 Kg. Machine dimensions: 1450 mm (length) x 640 mm (width), 1500 mm (height). Weight: 230 kg. - Microprocessor control - Built-in tape storage - Energy-saving design - The engine only runs during the strapping process - External tape spool holder for quick tape change - Compact machine; easy to use - The engine will stop automatically after the end of the strapping Process - Integrated Castors on the Tabletop - Starting the machine: release roller on the table top; start button or foot pedal - CE marked machine