Year of construction: 2024, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Dkelrjv Iqwdecrhhel Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, Year of construction: 2006, Functionality: fully functional, working width: 3,000 mm, stack height: 1,800 mm, Visible in production until the end of July 2025. It will be dismantled in August. Originally purchased in Italy at the end of 2020. After a full renovation, it started production in 2023. The machine is in very good condition. It is being offered for sale because it will not be compatible with a new production line currently being installed. This model is designed to work with bottom printing systems. Previously operated with a Curioni 2800 rotary printer, and currently works with a Curioni 2200NT Casemaker. Dolowdxdvorcrhhekl More pictures and movie on demand email/signal/whatsup

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, Functionality: fully functional, total length: 3,818 mm, total height: 1,785 mm, total width: 1,885 mm, product height (max.): 120 mm, product length (max.): 400 mm, product width (max.): 420 mm, working height: 870 mm, overall weight: 677 kg, film width: 600 mm, Equipment: documentation/manual, For sale: Minipack-Torre Pratika 55 smart packaging machine in mint condition. The machine offers the following features: – Automatic sealing machine with integrated tunnel – 180° return conveyor belt – Vertical photocell – Rotating bars in the tunnel – Stainless steel product tray – Adjustable guides – Cycle speed: 0 – 1,200 cycles per hour – Max. product size: length 400 mm / width 420 mm / height 120 mm – Max. film dimensions: width 600 mm / roll diameter 300 mm – Working height: 870 mm – Dimensions with return conveyor belt: length 3,818 mm / width 1,885 mm / height 1,785 mm – Connected load: 230 V / 1ph / 3 kW / residual current up to 30 mA (RCD type B or direct connection) – L-sealing system – Schneider Electric PLC M221 with 128 individually configurable and nameable programs – Color 4.3-inch touchscreen control panel – USB and SD communication interface – Servo Drive technology with brushless motor from Schneider Electric – Micro-perforation device with film tension adjustment at the set product height – Height-adjustable triangles and sealing bars – Standard conveyor belts comply with the strictest food regulations (FDA), fully antistatic – Motor-driven waste wrapper – Integrated shrink tunnel with reduced energy consumption Dkjlrjwdw Adocrhhsl – Weight: approx. 677 kg – Like new / Year 2022 / Very little use – Available immediately

Condition: used, Year of construction: 2005, total height: 2,020 mm, total width: 1,460 mm, total length: 1,200 mm, power: 3 kW (4.08 HP), Empty weight: 570 kg Voltage: 400 Dkolrcjvtzbderhhol

Year of construction: 2019, Condition: refurbished (used), Raptor of the company Pamminger model 2350 DBS machine was in use for 1 year Dslrcrheic U Ekshekl incl. lifting station (blue) and if required with driven roller conveyor. Cover sheet function Set program with corner edges.

Year of construction: 2023, Condition: new, Fully automatic orbital stretchfilmwraping machine with air bubble film unit SPINNER 1000s + BN Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 1,5kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total Power:5,5 kW - Total weight: 1100 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Automatic stretchfilm hooking system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit. (INCLUDED FOR THIS OFFER) Technical features: Product to Wrap Sizes - Max. length: Unlimited Dolrcsfuwkcerhhokl - Min. length (wxhxl): 100x18x550 Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 12m/sec. - Max. Load Capacity: 100kg/m Stretchfilm features: - Max. width: 200mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron Air bubble film unit: - Max. film width: 900mm - Max. film reel diameter: 700mm - Reel core diameter: 20~76mm - Suitable film materials: PW film, PE air bubble film, PVC film - Cutting & welding system operating temperature: 50°C~150°C

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S23MythoSarya03, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Dkslrcrev Iquvjhhsl TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Year of construction: 2003, total length: 4,420 mm, total height: 2,700 mm, total width: 1,500 mm, Manufacturer: Gualapack Model: CHP 40/3 Year : 2003 Type : Doypack bag filler, sold with laminar flow. > Video available on request. Electrical supply : 380 V three-phase/50 Hz. with separate neutral and earth conductor. Pneumatic supply: Compressed air 6 to 7 bar (atm.). Dkjlrjvlzx Tscrhhel Filling capacity = max. 1500 ml Filling temperature: 90°C max. Sachet production: By automatic feeding system Cap feeding : By vibratory unit and cork feed chute. Packaging dimensions: Max. width 120 mm / Max. height 270 mm. Max output : 40 pieces / min Operating principle Automatic loading of sachets onto the turntable. The filling date or use-by date is printed on the pouch (or other information). Filling station: 1) Suction of air from the sachet (using a vacuum pump) / 2) Filling of product, taking into account the capacity of the sachet / 3) Filling of the sachet with air or gas (nitrogen) if there is a risk of bacteriological problems with the product. Apply the cap to the sachet and pre-tighten the cap Final tightening of the cap to the prescribed torque. Check the position of the cap to see if it is correctly screwed on or if it is loose. The sachet is unloaded onto a belt conveyor for evacuation from the machine. Overall dimensions : Width 150 cm Length 441.50 cm Height 270 cm Weight : 1200 Kg

Condition: new, Case erectors Dkjlrcrhsvu Srishsl  Igluetech/Brunel Engineering Services RSE 5 pieces Price per piece

Year of construction: 1990, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm Dkelrsnr Ex Tecrhhel 1x 2-fold tool - diameter 93.80x120.90mm

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) Dkjlrcrhjukxwmohol - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Condition: good (used), Year of construction: 2010, age 2010 automatic inserting machine computer control with touch screen Dkolrceq Iyb Usrhhol vacuum table foil packing unit neo X inkjet print system HP BigJet 300 NT stacker RIMA RS 3313-S Delivery time: immediately from stock

Year of construction: 2024, Condition: as good as new (ex-display), machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Dslrcrev Iqt Eshhokl Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), For sale a pallet wrapper Soco System PW-1000. The wrapper works on power current. The machine has been checked and works properly. It is very easy to set up. The machine is from 2003. Can be supplied with a ramp In addition, I have other pallet wrappers in stock. Feel free to ask about the current stock. For more information, please send me a message. Video of the working machine can be sent via WhatsApp. We also supply wrapping film. For more information, please contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other advertisements Dkslswdm Agorcrhhjl Film wrapper, pallet wrapper, wrapping machine, wrapping machine, pallet wrapping machine, wrapping machine, Robot wrapper, wrapping robot, robot wrapper, wrapper, foil, wrapper

Condition: good (used), ATS MS-420S banding machine Dkjlowa Twcsrcrhhsl Serial:A311311A The ATS MS420S is a 30mm flexiable, easy to use tabletop banding machine with heatseal technology. Uses a 30mm banding to band products up to 420mm x 200mm with an adjustable band tension of 5 - 20N, processes paper and film bands. Up to 26 products per minute, 1Ph

Year of construction: 2002, Condition: like new (used), Stainless Steel Shrink Wrapping Tunnel Wrapping Tunnel for packing products with strech foil, Dkolshqfnlercrhhjl Producer: Schur Machine Model: E 340 Year of production: 2002 Complete Stainless Steel Tunnel Opening dimensions 750 x 400 mm. That is not used long time, like new one!

Condition: used, Film sealing machine AUDION ELEKTRO type D552 V10 Vertical band sealing AUDION Packaging Machines Delrcrheqlkivshekl Continuous heat sealer, bag closing machine, bag sealing machine Continuous heat sealer Machine. No. 9607552683416 Year of construction 1996 Sealing seam width approx. 10 mm Sealing length endless Mains connection 230 Volt, 50 Hz, 740 Watt - infinitely variable temperature setting from 80°C to 320°C - infinitely variable belt speed from 1 to 12 meters/min. - mobile base frame space requirement L x W x H 1400 x 600 x 1200 mm weight 105 kg good condition

Condition: used, 30A, 3x230V, cables included Djlrcrewdh H Tshhokl

Year of construction: 2025, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min Dslrcov Npx Njrhhjkl F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, type: Ariane 8060, built: 2003, mobile, total length: 3m Delrcrhewdh H Hjhokl

Year of construction: 2025, Condition: as good as new (ex-display), machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Dkslsv Iqyrjrcrhhjl Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: used, total length: 6m Dkslswdh Hyjrcrhhsl

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: Djlrsv Iq Aascrhhekl All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2025, operating hours: 1 h, Condition: like new (used), machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Dkslrcrhsv Iqrujhel Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control Dkolrov Iqqwjcrhhjl