Used Other machinery for sale (936)

Year of construction: 2015, operating hours: 3,674 h, Condition: used, Empty weight: 13.400 kg Cgsb Hev Hwxxscqdgot Dimensions (LxBxH): 597 x 296 x 313 cm Serial number: 026 Condition undercarriage: 60% Morooka MST2300VD Rubber Tracked Dumper, cab with airconditioning, tipping body, 6 cylinder turbocharged Caterpillar C7 ACERT Technology engine with 251HP (187kW), Tier 3/EU Stage IIIA emission, hydrostatic transmission, max. speed 11 Km/Hr, rated payload 11,000 Kg, operating weight 13,400 Kg, track width 750mm, work lights. Machine has low hours, comes straight out of work and is in clean condition. Inspections are welcome. Two similar units available from stock!

Year of construction: 2022, Condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 2300 mm Measurements height 2090 mm Machine weight 2510 kg Main Drive Cgsb Hcovfh U Usqdget Number of axis 3 This 3-axis Durma IW 80/150 BTD Punching and Bending Machine was manufactured in 2022. It features a stroke of 70 mm and can perform up to 38 strokes per minute. With dimensions of 1000mm width, 2300mm length, and 2090mm height, it weighs 2510 kg. If you are looking to get high-quality punching and bending capabilities, consider the Durma IW 80/150 BTD machine we have for sale. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Cob Hev Hnz Decqdgogt Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Bar max: 8 m3/h: 211 Cob Hec Sc E Rscqdgjgt KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465

Year of construction: 2010, Condition: used, Mileage: 227.446 km Field of application: Freight transport Cgobevmx A Se Hcqdgot Power: 331 kW (450 HP) GVW: 26.000 kg Please contact Emal Jaweed for more information

Year of construction: 2008, Condition: good (used), Functionality: fully functional, total length: 3,910 mm, construction height: 1,600 mm, working width: 400 mm, base width: 1,200 mm, pass-through height: 95 mm, machine/vehicle number: 400-005, Wolf soldering systems HWL400 (Heeb), year of manufacture JULY 2008, S/N 400-005 The machine is built similarly to the traditional stretch foot ■ Wörthmann wave 5 rows of holes, suitable for heavy circuit boards of power electronics ■ Wave width/working width 400 mm ■ Throughput height 95 mm ■ Maximum wave height 8 mm ■ Solder volume 370 kg (Balver SN100), crucible can be extended to the front, crucible and nozzle made of stainless steel and titanium for lead-free process ■ Heating time to 260°C 110 min ■ Crucible temperature adjustable 220-300°C, timer function for weekdays Cjbovq I Rmo Hcqdgegt ■ Diameter of suction nozzle 150 mm ■ Number of suction nozzles 2 ■ Suction capacity (regulated) 1300 m3/h ■ Length of machine (without inlet and outlet) 3910 mm including spray fluxer module ■ Width of machine 1200 mm ■ Height (without adjustable foot) 1560 mm ■ Total weight (without tin) approx. 900 kg ■ Spray fluxer module including pressure vessel ■ Pneumatic connection .“ / 6 bar ■ Heating power of crucible 8.9 kW ■ Preheating zone length 1600 mm ■ Preheating power (2x hot air, 3x IR, 1x hot speed quartz) 15 kW, control for approx. 99 programs ■ Total connected load approx. 30 kW ■ Connection voltage 400 V, 50Hz ■ Transport speed 0.5 – 2.5 m/min ■ Transport angle adjustable 6-8° ■ Soldering frame: 4 pieces, adjustable from Schnaidt to 350x450mm, various accessories ■ Inlet and outlet included Price without tin filling Tin in the crucible can be purchased for an additional charge, 370 kg Balver SN100C, SnCu0.7Ni according to WBZ TripleX: 2015 ex works, purchase as seen without warranty Payable upon collection, customer is responsible for transport and loading of the machine themselves

Year of construction: 2020, operating hours: 500 h, Condition: excellent (used), Functionality: fully functional, product length (max.): 2,600 mm, sheet width: 1,200 mm, machine/vehicle number: LKG-01, Milling and gluing line for plasterboards for Led profiles or angles, for making ready-made L- and U-type corners. Cgebev Rzzfj Hcqdgjt A line for milling and gluing G-K boards for LED profiles or corners, for making ready-made L- and U-shaped angles. Eine Linie zum Fräsen und zum Kleben von G-K-Platten für LED-Profile oder Winkel, die Herstellung vorgefertigter L- und U-förmiger Ecken ermöglicht.

Year of construction: 1994, Condition: used, Functionality: limited functionality, machine/vehicle number: 145001294, Elevator and furnace room are OK. Only the burner is defective. New control unit required because the memory backup battery is empty. Melting Furnace (W. Strikefeldt&Koch GmbH) Type: MHS-1000/500 G-ES Serial No.: 145001294 Year of Manufacture: 1994 Metal: Aluminum Capacity kg: 1000 Energy: Natural Gas Elevator (Red), (W. Strikefeldt&Koch GmbH) Type: K 506 Serial No.: 145001294 Cgsb Hev Rxc Hjcqdgjt Year of Manufacture: 1994 Load Capacity kg: 500

Year of construction: 2018, Condition: not inspected (used), Functionality: limited functionality, This offer is based on sale of a second hand CO2 liquefaction plant, installed in the Netherlands, Waalwijk. The purchase of this second hand unit includes: - CO2 Liquefaction System, for 600 kg/hour Currently, the CO2 liquefaction plant uses R404 (Freon) refrigerant. When the plant is dismantled, this refrigerant can’t be used anymore because of a ban by the European Union of this kind of refrigerant. The replacement is R449 refrigerant, and this refrigerant can be used in the EU and Switzerland also. The impact on the capacity, when using this refrigerant, is expected to be around 10% (585 kg/h) of the maximum capacity (650 kg/h). If required, Bright will replace the safety valves to be suited for this type of refrigerant. The CO2 gas entering the CO2 liquefaction installation must have a dewpoint temperature of -20°C. The price depends on scope of delivery. Cgeb Hcqdsv Rplfegot pls contact for more information

Year of construction: 2023, Condition: as good as new (ex-display), hydraulic tappet to fit any shredder or rotary shear . currently on sale mounted on a dechipper for destruction of hollow bodies . Cgob Hcqdevitq Aeget

Year of construction: 2024, Condition: new, Functionality: fully functional, Brand:Port Plus Fuel Type:Diesel Increase Capacity:3000 kg Engine Model:Original Japanese Isuzu C240 Transmisson Model Type:Automatic (With TCM technology) Pump:Japanese Shimadzu Brand Mast Type:Triplex Full Free Mast Cgebsv N T Ubs Hcqdget Mast Height:4.5 m Fork Length:1220 mm Extensions:Side Shift

Year of construction: 2020, Condition: excellent (used), Functionality: fully functional, The FLE-24A Service Depot is a compartment-based depot for keys and vehicle documents, making it the ideal solution for a 24-hour night depot in any car dealership. The roof, including a camera, is included in the price. (see photo) Pickup in 47441 Moers All information can be found on the data sheet. Cgsbev Rduhs Hcqdgot

Condition: excellent (used), Functionality: fully functional, Year of construction: 2011, Stone splitting system Model: P4 600x300, Year of Production: 2009 Model: P4 800x300, Year of Production: 2011 Pressure: 315 BAR Price for the complete set. Ceb Hcqdev N Ruxogegt

Year of construction: 2025, Condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Coolant device: Yes Feed: stepless Cgeb Hoha Nz Uocqdgot Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60 Dimension: 1400mm x 685mm x 1235mm Weight: 185kg

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details. Cgob Hov Nbxnscqdgjt

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2010, carrying capacity of cage: 300 kg, Insulated workman basket made of GRP 1000V from a Palfinger TKS 28 KS work platform. The workman basket was overhauled and repainted in our workshop. Size: Width 160 cm Depth 80 cm Height 115 cm. Ready to assemble incl. driving lights and ladder. Cjbjvf Iyke Hcqdgogt Year of construction approx. 2010.

Condition: used, Year of construction: 1995, operating hours: 4,281 h, Serial number: 2MJ01887 Condition undercarriage: 80% Cgsb Hcqjupfb Nodgjt Caterpillar D6E Pipe Carrier, low profile O-rops cab, Non-electronic Cat 3306DI engine with 155HP (116kW), 3 speed powershift transmission, undercarriage on average 80% remaining, 610mm pads, CE Marked. Machine has low hours and is in clean condition. Machine is available for sale or rent, subject to terms and conditions. Delta Machinery offers a wide range of pipeline equipment for sale or rental, please check our website for actual stock.

Year of construction: 2004, Condition: used, Functionality: unexamined, Semi-automatic flocking system Cgeb Hev Izr Escqdget Manufacturer: AIGLE Macchine srl The system is used to coat various materials. It can also be used as a painting system. In this particular case, the interior parts of car glove boxes were coated. The glove boxes were hung on a conveyor belt and first sprayed manually with glue. The boxes were then sprayed with flocking material in the individual flocking booths. The spray direction changes depending on the station. After the 4 flocking booths there are 2 cleaning booths. The blown, unbonded fibers are then reintroduced into the coating process via the flock distribution system. Similarly, the unbonded fibers from the four flocking booths are returned to the process. Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Lock door Width: approx. 880 mm Height: approx. 750 mm Productivity: 1000 - 1500 pieces in 8 hours depending on shape and materials Voltage: 400 Volt 50 Hz Installed electrical power: 26 kW Electric power supply: 480 V 60 Hz Space requirement for chain belt flocking system approx. 16 x 5 m Machine dismantled and assembled in the warehouse. The machine was operational until the last day of operation.

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2023, operating hours: 813 h, Matzek R-SW 1500 SV suction truck, built in 2023, 813 operating hours, tank capacity 1500 liters, side channel blower 7.5 kW, suction and pressure approx. 250 mbar, 2 spring-loaded rollers at the front 80 mm, wheels at the rear 130 mm, serial no. 232956/SV, suction machine for oil and chips Csb Hcqdev Ix Abogsgt

Year of construction: 2025, Condition: new, Our company has been building foam cutting machines for over 15 years. The experience gained over the years of working on foam processing machines has allowed us to build the 4th generation of vertical machines RV 2500/2100 as well as the 3rd generation of horizontal contour lines SK3500. Cgeb Hcqoiqt N Isdgst Our machines work on the Polish and European markets. The machines are designed and built in our company, the software is also our own. The materials used to build the machine are widely available on Polish and European markets. Our service works 7 days a week, providing a sense of security to our customers. Vertical machine left table 2100mm x 2600mm right table 2100mm x2600mm cutting height 1340mm Horizontal liner SK3500 rotary table 2200mm x2200mm cutting height 1250mm

Year of construction: 2006, Condition: used, Automatic rotary drum stainless parts and cap dispenser Bünder Schmitt Series 1 Production: Bünder Schmitt Tip: LINE 1 Year of manufacture: 2006 Cjb Hcqdoukg Imogjgt drum diameter: 1000 mm doseable component size: diam. 25mm x 10mm Siemens control. Stainless steel.

Year of construction: 2006, Condition: good (used), EXCELLENT MACHINE FOR MANUFACTURING ENDLESS DRAIN PIPES FI 100. (333) Csb Hcqsv Im Ufsdgegt THE MACHINE WORKS Flawlessly.

Condition: used, Year of construction: 1978, operating hours: 1,235 h, Serial number: 77V09737 Condition undercarriage: 80% Caterpillar D8K Pipe Carrier/pulling tractor, Pipe saddles can be changed to transport various pipe diameters from 20 to 60 inches, 6 cylinder turbocharged Caterpillar D342T engine with 300HP (224kW), 3 speed powershift transmission, drawbar, undercarriage 80% remaining, 710mm shoes. Machine comes straight out of work and is in clean condition. Inspections are welcome. Delta Machinery offers a wide range of pipeline equipment for sale or rental, please check our website for actual stock. Cgebjupfdqj Hcqdgst

Condition: used, Year of construction: 2015, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Ceb Hcqeukg Srodgsgt Table size: 400x620mm

Condition: good (used), OMRON CPM1A control, 4 stations. Target machine for assembling and compressing door glass modules. Price is a net target price, a matter of final price agreement Purchase, acquisition, asset management of industrial equipment and machinery. Wide range of used machinery, industrial equipment Cjb Hcqofruvcodgsgt