M.S. Metall-&Schweißtechnik

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 730 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 3D, table load: 500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details. • Working area / travel: • Modification: X-axis travel reduced by 100 mm (effective X travel 630 mm) • Main drive & spindle: • Motor spindle SK40 with active cooling • Power: 15 kW (40% duty) / 10 kW (100% continuous) • Tooling system: • Tool holder: SK40 (DIN 69871) • Tool clamping: DIN 69872 • Tool changer: Pick-up system • Magazine: 24 pockets (SK40) • Work table: • Integrated NC rotary table in rigid table • Rotary table Ø 600 mm; total table 1,000 x 600 mm • T-slots: 1x 14 H7 (alignment, centered) + 8x 14 H12 (clamping) • T-slot spacing: 63 mm • Permissible load: 500 kg • Milling head: • Controlled NC-swivel B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivel range: -120° to +30° • Control system: • Electronic handwheel iTNC 530 • Control language: German Additional equipment Iaedpfx Asyvfpbshvjp • Workpiece measurement: Heidenhain TS 640 infrared probe (SK40) • Tool measurement: Blum laser (in-machine vertical tool length and diameter) • Chip conveyor • Flushing gun with pump (1 bar / 40 l/min theoretical capacity) • Networking: DMG Netservice Basic Package Euro ISDN (Netservice Box, Cisco Euro ISDN Router, license) Technical Specification Taper Size SK 40

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 20 [kW] - Spindle speeds : 24000 [rpm] - Number of spindle hours : 4877 [h] LINEAR AXES - Travels on X/Y/Z axes : 700/420/380 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 25 - Tool exchange time : 0.9 [sec] TABLE - Table dimensions : 840/420 [mm] - Maximum weight upon table : 400 [kg] - Distance table / spindle nose (min./max.) : 200-580 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 16 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1650/2950 [mm] - Machine height : 2550 [mm] - Machine weight : 3400 [kg] MACHINE HOURS - Number of hours under power : 18761 [h] - Number of working hours : 7667 [h] EQUIPMENT - CNC : Siemens 840D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Rigid tapping - 3 colors status lamp - Coolant tank Isdeyu U E Aepfx Ahvoap * with high-pressure pump * with paper filtering unit - Coolant through spindle - Chips conveyor - Tool probe - Workpiece probe - Electric transformer

Condition: ready for operation (used), The machine is ready for operation. Please refer to the video: Iedpfx Ahsyu Tlzjvsap The machine can be dismantled, loaded, and transported to your location for an additional charge. Basic Specifications Travel paths: X 710 / Y 520 / Z 520 mm Weight: approx. 5,500 kg Tool holder: SK40 or HSK-E50 Tool magazine: 24 positions (optionally 60) Spindle Standard: 12,000 rpm Option: 30,000 rpm Power: 10–15 kW (standard) / 15–20 kW (option) Axes & Feed Rapid traverse: 30 m/min Feed rate: up to 10,000 mm/min Resolution: 0.001 mm Positioning accuracy: 0.010 mm Tool Data Max. tool length: 315 mm (SK) Max. tool weight: 6 kg Magazine total weight: 80 kg (optionally 180 kg) If you have further questions, please feel free to send a message here, or contact us via WhatsApp or phone. The price is net, no warranty or returns, liability for defects is excluded, subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: HAAS, table load: 1,360 kg, overall weight: 4,200 kg, spindle speed (max.): 7,500 rpm, number of axes: 4, This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details. Iodpfjyu S Ubjx Ahvsap • Tool magazine: 20 positions • Rapid traverse: 25 m/min • Feed rate: 16 m/min • Table size: 600 x 865 mm • Condition: Ready for operation Additional equipment • Chip conveyor Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HAAS VF-3SS Super Speed – 2014 The machine is in good working condition and can be inspected under power. Please note: The rotary table shown in the photos is part of the current production setup and is not included in the sale. Manufacturer: HAAS Model: VF-3SS Year of manufacture: 2014 Travels: X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Table size: 1219 × 457 mm Maximum table load: 794 kg Spindle: Speed: 12,000 rpm Spindle taper: CT40 / BT40 Iodpfx Ajyuytfshveap Motor power: 22.4 kW Tool changer: Side-mount tool changer (SMTC) Capacity: 24 + 1 tools Rapid traverse rates: X/Y/Z: 35.6 m/min Machine weight: approx. 5,670 kg Excellent opportunity – attractive price for a HAAS Super Speed machine. Machine available immediately.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,327 h, travel distance X-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details. • IKZ • Probe • Tool measuring • Axis configuration: 3 axes (X/Y/Z) • Frequency: 50 / 60 Hz • Short circuit interrupting capacity: 10,000 A Iodeyux Saepfx Ahvjap • Short circuit current: 5,000 A RMS symmetrical • Arc flash rating: • 208-240 VAC models: HRC-1 • 360-480 VAC models: HRC-2 • Feed cutting time: 5327 h

Condition: used, Year of construction: 2004, Hurco VMX24S Vertical Machining Centre with Hurco Ultimax Control, Table size 760mm x 510mm, 24 ATC, BT 40 Tooling, 8000rpm, Travel X=610mm Y= 508mm Z= 610mm, Coolant Tank. S/No. H-2S061 (2004) Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Ijdjyuvt Ijpfx Ahvoap

Condition: good (used), Year of construction: 2003, functionality: fully functional, x-travel 1270 mm y-travel 660 mm z-travel 610 mm Control Ultimax 4 Iasdoyuu S Nepfx Ahvep Table load capacity 1300 kg Spindle speed 10,000 rpm 24-position tool changer Tool taper SK 40 Drive power 15 kW Table size 1500x660 mm

Condition: excellent (used), Year of construction: 2002, Data XYZ: 508 x 406 x 508 mm Control: Haas Magazine: 20 stations / SK 40 Chip conveyor Iedpfx Ahsyupmuovoap Coolant system Machine has low operating hours

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Iodpfx Ahjyugyroveap

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,112 h, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VMX30i vertical machining centre was manufactured in 2016. It features a spindle speed range of 10 – 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 760 mm, Y-axis travel of 510 mm, and Z-axis travel of 610 mm, along with a table size of 1020 × 510 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX30i machine we have for sale. Contact us for further details. • Control: WINMAX (MAX 5), dual-screen • Table size: 1020 × 510 mm • Tool changer: 30 positions • Design: New design Additional equipment • Chip conveyor • Water cooling system • Main spindle cooling • Full machine enclosure / chip protection guard • Machine work light • Machine base Iaodpfxeyufcfs Ahvop • Machine status indicator • DXF option • ULTIMONITOR Ethernet Kit • Materials and Tools Library • WINMAX PC Software • External spindle blower

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Iodpfeyt I Uhex Ahveap Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 13 m/min, rapid traverse Y-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, spindle speed (max.): 7,500 rpm, VERTICAL MACHINING CENTER MIKRON VCE 750 TRAVELS 760X400X500 Iajdpsyt Il Hsfx Ahvsp SPINDLE ISO 40, 7500 RPM TOOL CHANGER WITH 20 POSITIONS

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 762 x 305 x 406mm, Table 1213 x 267mm, Spindle speed 6,000 rpm, Spindle taper BT40, Iaodpfxjyt Hbts Ahvsp Spindle Motor 5.6Kw Hp, 10 station toolchanger, HAAS Control, low volt light, coolant

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Spindle speed 12,000rpm, Spindle taper CAT40, Iedpeyt E Uxsfx Ahvjap 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: used, MIKRON HSM 800 ProdMod is a Vertical machining center engineered for precision, high accuracy and reliability. Working capacities: table 900×600 mm, max table load 800 kg; travels X800 × Y600 × Z500 mm. Main specs: spindle motor 12.5/22 kW, total power 26 kW, 3x 400 V 50 Hz, noise 75 dB(A), machine weight ≈8300 kg, dimensions L4000×W3700×H2500 mm. Equipment: 50‑position tool magazine (tool Ø max 75 mm, length 210 mm, max tool weight 2.5 kg). Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Iodpeytu Hkefx Ahvjap

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, total height: 2,700 mm, total width: 2,400 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 7,500 rpm, product length (max.): 2,400 mm, number of axes: 4, This 4-axis HAAS VCE 750 was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 400 mm, and Z-axis travel of 500 mm. The machine includes a table size of approximately 900 x 350 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VCE 750 vertical machining centre we have for sale. Contact us for further details. • Table size: approx. 900 × 350 mm Iaedpjytqvhefx Ahvjp • Tool magazine: 20 positions (carousel) • Included options: 4th axis; through-spindle cooling Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2004, operating hours: 6,679 h, functionality: fully functional, machine/vehicle number: H-30459, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,800 mm, total length: 3,200 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, HURCO VMX 30 Vertical Machining Center Iedpjytny Djfx Ahvsap - Spindle nose to clamping table: 152 – 762 mm - Table T-slots (DIN 650): 5 - For further technical data, see photos - With technical documentation - Important note: The machine vices visible on the work table are not included in the scope of supply! - A tool holder package is included in the delivery. Attention: The item must be collected bindingly between 27.04. and 30.04.2026 on a date to be agreed. FCA D-39126 Magdeburg – loaded onto truck

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Iedoytb Syopfx Ahvoap Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 750 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: Oi MF5, total height: 2,850 mm, total width: 2,600 mm, table width: 420 mm, table length: 750 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (max.): 11,000 rpm, spindle motor power: 11,000 W, product length (max.): 2,400 mm, number of axes: 4, This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details. • Automatic Tool Changer: 24 tools • Rapid Traverse: 48 m/min • Feed Rate: up to 15 m/min Ijdpoyrfcgofx Ahveap Additional equipment • Chip conveyor (included) Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Iasdpfxjyq Ipgo Ahvop

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. Iaodpfx Aheyq Emisvjp - Chip conveyor - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,118 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, Machine already disassembled! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Max. spindle speed: 12,000 rpm Spindle motor power: 22 kW Spindle taper: BT40 Iedpsypbhtjfx Ahvsap Number of tool magazine slots: 40 MACHINE DETAILS Control manufacturer: HAAS Dimensions & Weight Dimensions (L x W x H): 4,014 x 3,046 x 3,048 mm Weight: 6,500 kg Operating Hours Power-on hours: 16,142 h Cutting hours: 12,118 h EQUIPMENT Central spindle cooling system 20 bar Filtration Chip conveyor belt Workpiece probe Tool probe Robot interface Automatic (side) door Handheld control unit Cleaning pistol High-speed machining

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, table width: 410 mm, table length: 1,230 mm, table load: 250 kg, overall weight: 3,500 kg, spindle speed (max.): 9,200 rpm, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Type: 80 CNC Year of manufacture: 2000 Technical data: Travel X-axis: 700 mm Travel Y-axis: 315 mm Iaodpfx Aheynwdnjvjp Travel Z-axis: 180 mm Travel W-axis: 495 mm Spindle speed (max.): 9,200 rpm Number of tool magazine slots: 32 Tool holder: SK30 Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg Control manufacturer: HEIDENHAIN TNC415B Equipment: Documentation/Manual Continuously variable spindle speed FEHLMANN indexer (4th axis) The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Ijdpsyncfwefx Ahvjap Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar