Mekanik Makina Tic. Ltd Sti

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,634 h, functionality: fully functional, machine/vehicle number: 051116206, turning length: 1,000 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, controller model: Fagor 8040 TC, TECHNICAL DETAILS Swing diameter over bed: 450 mm Swing diameter over cross slide: 215 mm Turning length: 1,000 mm Bar capacity: 52 mm Kedjycu Igepfx Ad Nowt Spindle speed: 4,000 rpm MACHINE DETAILS Control unit: Fagor 8040 TC Dimensions & Weight Machine dimensions (L x W x H): 3,000 x 1,995 x 2,001 mm Machine weight: approx. 2,400 kg Operating hours: 20,634 h EQUIPMENT 4-position tool holder Tailstock Documentation

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Max. turning diameter: 460 mm Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Spindle bore: 81 mm SMW Autoblok chuck 250 mm Axis travel: - Z axis: 680 mm - X axis: 265 mm Kedpfsycgpcox Ad Nswt 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition

Condition: used, Year of construction: 2002, spindle motor power: 11 W, rotational speed (min.): 4,500 rpm, CNC Lathe "LEADWELL" Model T6 CNC FANUC 0-TD Complete with standard equipment Max. turning length: 450 mm Max. turning diameter: 290 mm ATC with 12 stations Spindle speed: 4500 rpm Motor power: 11 kW Kjdpfxox U Ti Is Ad Nowt

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Kodsx Uy Haepfx Ad Njwt Swing over cross-slide 590mm, maximum machining diameter 481mm, maximum machining length 1275mm, bar capacity 102 mm, 12 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck,

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510, year of manufacture 2004, Siemens 840 D control with Shop Turn, travel range X/Z 300/1050 mm, 12-position turret, VDI 40, tailstock, coolant pressure 20 bar, spindle speed up to 3,500 rpm, three-jaw chuck Ø 315 mm, bar capacity 90 mm, quill travel 150 mm, 14,000 spindle hours, only small batch sizes of 0 - 5 produced on the machine, programming was carried out directly on the machine, no driven tools. Kwjdpfxjx Ux Tfe Ad Nst

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] Kwsdpfjx Tvkrex Ad Nst - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 51 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 760 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 42 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [mm] - Machine weight : 6.200 [kg] MACHINE HOURS - Number of hours under power : 15525 [h] - Number of working hours : 12865 [h] EQUIPMENT - CNC : Mitsubishi MSX-850II - Interactive programming : MAPPS III - Interface : USB / PCMCIA / RJ45 - Tool probe : Renishaw - 3 colors status lamp - Tailstock function - Coolant tank - Chips conveyor : Droite - Spindle cooling unit - Parts catcher - Bar loader : LNS Quick LoadSERVO 80 - Parts conveying strip - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. diameter on bench : 923 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/1345 [mm] Ksdpfjx Tvklsx Ad Nowt - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Distance between centers : 1255 [mm] - Tailstock stroke : 734 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 10 - Number of turning tool holders : 2 - Electric transformer - Collet chuck

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Kwjdpjx N Ncgsfx Ad Nst

Condition: used, Year of construction: 2007, Pallet size 500 x 500 X axis 710mm Y axis 680mm Kwedjx Ii Adepfx Ad Njt Z axis 680mm spindle taper No 40 12,000 rpm.

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA Kwsdpfx Ajx H Atyjd Not - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: used, Year of construction: 2001, turning diameter 720 mm turning length 2.000 mm control FAGOR 8055 turning diameter over slide 470 mm feed 8 m/min spindle nose DIN-55027-11 spindle passage 104 mm number of spindle speeds 0-1600 U/min/rpm spindle drive 17/ 20.5 kW Torque 1590/1920 Nm total power requirement 28 kW weight of the machine ca. 4.9 t dimensions of the machine ca. 6.600 x 2.300 mm Tailstock Kwsdpfxox Hp Dfj Ad Nst Tailstock quill diameter: Ø 100 mm Tailstock quill travel: 200 mm Tailstock quill taper: Morse taper MT 6 Turret 4-position automatic turret Machine Equipment Full rear protection enclosure Hydraulic 3-jaw chuck SMW AUTOBLOCK 400 GH Fixed steady rest, capacity 50–220 mm Maximum Permissible Weights Max. workpiece weight between centers: 2,560 kg With 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kg Free-standing, center of gravity at 250 mm: 800 kg

Condition: good (used), Year of construction: 2014, 780mm Swing, Ksdpfx Asx Eluwed Nswt 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: like new (used), Max. workpiece diameter: approx. 200 mm Number of spindles: 2 Number of tool stations: 12 Control system: SIEMENS Sinumerik ONE Handheld control unit: KUKA Chip conveyor: KNOLL 280 S-1/160, year of manufacture 2022 Cooling unit: DELTATHERM RKV 5.5, year of manufacture 2022, net weight approx. 190 kg, connected load 400/460 V, 50/60 Hz Handling robot: KUKA Industrial Robot Cybertec-2 Series, year of manufacture 2022, net weight approx. 282 kg, payload approx. 22 kg Robot control unit: KUKA KR C5 Dualcap AC, year of manufacture 2022, connected load 3 × 380–480 V, 50/60 Hz Coolant filtration unit: KNOLL KF 150/950, year of manufacture 2022 Kwsdpfex Ddnksx Ad Not Air filtration unit: AFS 1100, year of manufacture 2021, net weight approx. 70 kg

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW Ksdpfx Asx Dcgxjd Newt weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m Ksdox Aq Hwepfx Ad Newt greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: used, Year of construction: 2001, Technical details: Kwsdpex Aq Hkjfx Ad Njt turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws Kedpfx Adjxyaf Rs Nswt - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: used, Year of construction: 2008, DAEWOO DOOSAN PUMA 400 M LATHE YEAR OF INITIAL INSTALLATION 2008 AUTOBLOK SELF-CENTERING STEADY REST CNC Model: Fanuc CNC Version: 21i-TB Main spindle power: 30 / 37 kW Main spindle chuck diameter: 315 mm Main spindle bar capacity: 95 mm Swing over bed: 770 mm Swing over carriage: 590 mm Turning diameter over bed: 560 mm Turning length: 1105 mm Kedjxxur Aopfx Ad Nowt Main spindle speed: 20 – 2,500 RPM Number of tool turrets: 1 Number of tool stations on first turret: 12 Number of driven tool positions on first turret: 12 X-axis travel (first turret): 362 mm Z-axis travel (first turret): 1105 mm Tailstock: Yes Chip conveyor: Belt type Tool presetter: Yes Number of driven toolholders supplied: 5 (3 axial + 2 radial) Machine in excellent condition.

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm Ksdpfx Aexwzfyjd Njwt

Condition: used, Year of construction: 1987, operating hours: 2,362 h, functionality: limited functionality, machine/vehicle number: L7+029, turning diameter over cross slide: 42 mm, spindle bore: 42 mm, spindle motor power: 7,500 W, rotational speed (max.): 4,500 rpm, Equipment: documentation/manual, LEADWELL LTC10 Year of manufacture: 1987 Operating hours: 2362h Turning diameter: 42mm CNC type: Fanuc OT Model A Number of tool turrets: 1 Axes: X, Z, and C Tailstock Number of turret positions: 8 Main and sub spindle speed: 4500 rpm Main spindle motor power: 7.5 kW Dimensions (L x W x H): 235 cm x 122 x 160 Weight: ? kg Chip conveyor Documentation: electrical diagrams, Fanuc manual, spare parts list, programming assistance, hard copy of parameters. Numerous fixed tool holders included in the sale. Kjdpexwp T Eefx Ad Njwt The machine is operational. It is somewhat aged, so it is not perfect. Machine is to be collected on site (Marignier - France). Loading and transport costs are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6A N3602, turning length: 520 mm, turning diameter: 360 mm, overall weight: 3,800 kg, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 520 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Kedjxvrruspfx Ad Njwt Required space: 3 x 2 x 2 m Machine weight: 3.8 t

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: R2AP3901, turning length: 700 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, turning diameter over bed slide: 430 mm, workpiece length (max.): 510 mm, TECHNICAL DETAILS Turning diameter: 220 mm Turning length: 700 mm / 665 mm Swing diameter over bed: 430 mm Max. part length: 510 mm X-axis travel: 160 mm Spindle bore diameter: 45 mm MACHINE DETAILS Total power requirement: 17 kW Kwedpfxexvrn No Ad Not Dimensions & Weight Required space approx.: 2.63 x 1.98 x 1.94 m Machine weight approx.: 2.6 t

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 480 mm, controller model: Siemens Sinumerik 840C, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed: 550 mm Swing diameter over cross slide: 480 mm Turret: 12 positions Number of driven stations: 6 Tool holder: VDI50 Speed range: 30 - 3,000 rpm Spindle bore: 90 mm MACHINE DETAILS Control: Siemens Sinumerik 840C Dimensions & weight Dimensions (LxWxH): 580 x 270 x 270 cm Weight: approx. 11 t Kjdpoxtmvcsfx Ad Newt EQUIPMENT SMW Autoblok 315 power chuck (without soft top jaws) Approx. 10 driven tools Approx. 10 live centers for tailstock

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 450 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 400 mm, bar diameter (max.): 51 mm, workpiece length (max.): 380 mm, TECHNICAL DETAILS Capacity Turning diameter: 450 mm Kwodjxrc Dgepfx Ad Njt Maximum machining diameter: 340 mm Maximum machining length: 380 mm Bar capacity: 51 mm Travel Range X-axis travel: 215 mm Z-axis travel: 400 mm Spindle Spindle speed: 30 – 5,000 rpm Spindle nose (Type No.): A2-6 Spindle bore: 59 mm Spindle bearing inner diameter: 100 mm Turret Tool positions: 12 Gripper: 25 mm Drill holder diameter: 32 mm Feed Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Cutting feed (per revolution): 0.001 – 500 mm/rev Feed rate: 0 – 2,000 mm/min MACHINE DETAILS Control: Seicos Machine weight: 4,600 kg Motor Spindle motor (50% duty cycle / continuous): 11 / 7.5 kW Feed motor X-axis: 4 kW Feed motor Z-axis: 4 kW Turret indexing motor: 2.2 kW Guideway lubrication pump: 18 W Spindle coolant pump: 370 W

Condition: good (used), Year of construction: 2012, DMG CTX 510eco CNC lathe with C-axis and driven tools Year: 2012 CNC controller: SINUMERIK 810D with ShopTurn X-axis travel mm: 300 Z-axis travel mm: 1.050 Turning length mm: 1.050 Max. turning diameter mm: ø 465 Swing over bed mm: ø 680 Swing over cross-slide mm: 465 Bar work capacity mm: ø90 Turret head capacity .: 12 positions (6x driven) Speed ​​driven tools rpm: 4000 Main spindle Max Speed ​​spindle rpm: 3.250 Drive power spindle kW: 33/22 (40%/100% DC) Spindle bore mm: 102,5 Spindle nose: Flat flange (220h5) Ksdpfx Adoxqq Nbj Newt Maximun torque Nm: 420 (100% DC) Tailstock Tailstock travel mm: 850 Tailstock cone: MK5 Length x width x height, mm: 5300x2230x2010 Weight kg: 8100 Accessories/options: Foot switch for chuck open/close Driven tool holders Static tool holders Swarf conveyor Documentations Under power in our warehouse.