TME Technologies GmbH

Condition: used, Year of construction: 2001, Foundry Manipulator CLANSMAN DYNAMICS Csdpfx Aexxylzsb Tork Year of construction: 2001 Max capacity: 250 KG

Condition: used, functionality: fully functional, For production bakelite insulated H7 and H4 lamp sockets. Crjdpfx Aexvrcasb Tok Two complete machines available, one for H7 and one for H4 products.

Condition: used, Continuous Casting Machine Codpfsxixkwjx Ab Tork

Condition: used, Year of construction: 2000, Glass melting equipment for making glass insulation for lamp heads. Crjdpfxexbyz Us Ab Tok

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner - CSA approved Csdjwtzpyspfx Ab Terk

Condition: new, Diameter 620mm Height 700mm Wall thickness 40mm Crjdpfxjwmmq Ne Ab Tjk Suitable for aluminum, among other materials

Condition: like new (used), Year of construction: 2019, functionality: fully functional, A used Rautomead RMT 200 is for sale. Crodpfx Aev Rz Ekjb Tsk Inspection on site is possible. More technical details are available upon request.

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein YXLON X-ray system Spectral analysis Spectro Crsdpfx Asvz Apreb Tok Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Condition: used, Year of construction: 1975, machine/vehicle number: SN: 75.1019, DISAMATIC 2032 A SN: 75.1019 Date of manufacture: 1975 Dimensions: DISAMATIC 2032 A: 8011 x 1600 x 2950mm (length x width x height) Control room: 2400 x 1900 x 2300mm (length x width x height) Weight: ca 32t (without hydraulic oil) Mold dimensions: Height: 600mm Width: 775mm Thickness: min. 150mm / max. 400mm The thickness of molds depends on chamber depth, molding pressure, molding boards, pressure of sand shooting, molding sand properties. Pressure on molds urface: To be set up between 0 and 22kp/cm² Efficiency: 300 molds per hour (coreless/thickness of mold 200mm) Current fficiency: 150 molds per hour Max. unit weight of casting: approx. 40kg net Molding sand consumption: max. 85m³ per hour Air consumption: max. 14m³ per min. Air pressure: min. 6kp/cm² max. 10kp/cm² Electric power system: Power demand: 59.5kW 1) main engine - 37kW 2) servo motor – 7.5kW 3) heating parts – 13kW 4) control system – 2kW Control voltage: 110V AC MOULDING CHAMBER DIMENSIONS Top Plate # 774.8 x 710 x 30mm Side Plate, right # 810 x 710 x 30mm Side Plate, left # 810 x 710 x 30mm bottom plate # hardchromed 1-side 2311 x 774.8 x 8mm PMC SYSTEM -PMC cappingstrips Dimensions: Width: 775mm Length: 18m Weight: ca 8t Air consumption: Average consumption: 0.5m³/min Max. consumption: 2.5m³/min ----- Lack of CSE – "QUICK CORE MASK CHANGE" Lack of QPC – "QUICK PATTERN PLATE CHANGING UNIT" ----- Molding machine DISAMATIC 2032 A is integrated with pouring furnace BBC XCQ 44 with capacity 4.4t s inductive furnace is equipped with heated inductor with max. power 120kW and bottom-pour stopwatch. Molding line is connected with knockout grid. We're ready to sell whole molding line, including extra facilities. Machines are in goods hape, mechanically and electrically efficient. Cedpevyc T Uofx Ab Tjrk

Condition: good (used), Year of construction: 1960, functionality: fully functional, AOD converter The argon oxygen decarburization (AOD) process is used to make stainless steel and specialty grades of steel, including tool steels, silicon steels, low-alloy steels, and low-carbon steels. - Output 8,0 t - AOD Konverter furnace reserve vessel + lifting balance - Argon Csdpfxovamv He Ab Tork - Oxygen - Nitrogen - Compressed air Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 - KF Arc Furnace_AC EAF 8 ton, 4 MW - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t - Power transformer 4 MW Codpfxovampgo Ab Terk Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: good (used), Year of construction: 2012, functionality: fully functional, - Year of manufacture / commissioning: 2012 - Technical documentation is available. - The machine can be operated from the control panel or via a remote control. - The machine's operating system is Windows 7. - Control unit - Sand mixer - Sand station with New sand, Reclaimed sand, - Chemical station whit ALPHASET TPA 180 and INDUSTOL ABS Codpouxt I Djfx Ab Tsrk - If desired, the machine operator can be requested to explain the machine's operation - I.M.F. T36/50-SB 2012 1 continuous mixer Europe double-articulated style, upright, capacity 50 t/h, radius 6,5 + 2 m, height adjustable - The price includes the entire I.M.F. T36/50-SB sand mixing system - Offers are accepted

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood Crjdpfsuxmt Tjx Ab Tok grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, Machine type: Horizontal table-type boring machine Cjdpfsui H U Nsx Ab Tork Manufacturer: CORNAO Model: BS65N S1893 Year of manufacture: 1983 Condition: Used Motor power: 6.5 kW Voltage: 400 V Required air pressure: 5 bar Weight: 1,900 kg Control system: A.I.F

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Cedpfspu D Dzex Ab Terk Extendable : 700 mm x 1400 mm Angle of rotation around longitudinal pivot : 360`

Condition: as good as new (ex-display), Year of construction: 2019, Four pieces UHP graphite electrodes 405x1800 mm, 442 kg each, with nipples T4, for electro arc melting furnaces. Cedji Dn H Ijpfx Ab Terk

Year of construction: 1995, condition: excellent (used), SPECIAL STEEMAKING SHOP EQUIPMENT   Vacuum Induction Melting Furnace P1000 ALD, 8 tons capacity Electro Slag Remelting, type ESFR F350/1, capacity 1,3 tons electrode AJAX, Induction Melting Furnace 6.3 ton capacity with two crucible AJAX Vibration Scrap Charging for AJAX Induction Melting Furnace Spectrometre ARL 3460 KRAUTKREMER, Ultrasonic Testing Equipment Electrical Transformer 1600 KVA 20/0.4 KV Metalographic Microscop Metalographic specimen cutting and polishing Diesel Generator Water treatment plant Cutting saw Please contact us for more technical details and photos. Codpfoif Ulusx Ab Tork Thank you!

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Technical data: Crsdpfxsgxmabs Ab Tok - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg - Separate control cabinet with high frequency device for - high frequency tools

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Credpjgqr A Dsfx Ab Tok

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt Codpfx Absd Tx A Eo Tjrk cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: excellent (used), 1 piece shooting head, dimensions see photo, very good condition, ready for immediate use Cjdpfed Tx A Aex Ab Tjrk

Condition: excellent (used), 2 pieces shooting head and one shooting head extension for a Roeper H12, very good condition, ready for immediate use Crodpfod Tx Azjx Ab Tek

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Crjdpfx Ajd Tx Ahob Tok

Condition: good (used), Rash rust, unpacker with two vibration motors, good condition, ready for immediate use, wooden supports have to be replaced Cedod Tx Abjpfx Ab Tork

Condition: good (used), Core Sand Mixers, Green Sand MixersVarious sizes and manufacturers, (the photos show only a small part of the selection) immediately available from stock Crsdpfx Aod Txz Ueb Tsk