Geiger Handling GmbH & Co. KG

Condition: used, Year of construction: 2013, overall weight: 300 kg, load capacity: 3 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Crodpfx Aiszi E Tlelsd

Condition: like new (used), Year of construction: 2018, operating hours: 7,500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The machine can be inspected/tested; original purchase price was €59,000! Technical Specifications: Z-axis (crosswise to the machine longitudinal axis) Stroke: 1,600 mm Max. speed: 3.0 m/s X-axis (parallel to the machine longitudinal axis) Stroke: 900 mm Max. speed: 2.0 m/s Y-axis (vertical/plunge axis) Crjdpfxszi A Ute Ailed Stroke: 1,000 mm C-axis (for gripper rotation) - Swing range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Max. torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Second vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Third vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper Fourth vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Tenth pneumatic valve 5/3 with locked center position for gripper functions, piped to the gripper flange with quick-release couplings DN 2.7 for hose size OD 6 / ID 4; customer-side hose connection 8 freely programmable inputs for querying 8 gripper-mounted sensors, pre-wired to the gripper flange with a 25-pin connector; up to 8 sensors can be monitored; the corresponding mating connector for the gripper-side connection is included Second interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Third interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Fourth interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Interface with 4 freely programmable inputs and outputs, non-isolated, on a 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), non-isolated, wired to a 72-pin socket on the MULTILIFT Push-in fitting for hose size OD 6 / ID 4

Condition: good (used), Description Articulated conveyor belt from Frasch with an attached separating screw for separating sprues and parts. FS add-on separator Cjdpfsziwqcex Ailord Features: Separation of parts with small size differences Drive via the conveyor Precise adjustment of the sliding plate via threaded spindle Lever-free discharge side Safety slip clutch Robust design FS500 left (separator) Conveyor belt length: 1,300 mm Conveyor belt width: 300 mm Overall length: 2,500 mm Overall width: 600 mm Overall height: 1,200 mm Total weight: 80 kg Input voltage: 400 V Input frequency: 50 Hz

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: documentation/manual, Frasch FA_LH700 (2011) - Codpfjzht Nrox Ailsrd Dimensions (m): 2,6x0,51x1,35 (LxWxH)

Condition: excellent (used), Year of construction: 2013, Number of axis: 3 Reach: 2000 mm Payload: 8 kg X- 905 mm Y-1200 mm Z-2000 mm with console height 50cm see in pictures Model: Wittmann W828-311 Controller: CNC 8.2 Main Specifications Crjdezhni Tepfx Ailod 1. Number of axes: 4 (X, Y, Z + pneumatic C axis) 2. Z stroke: 2000 mm 3. Y stroke: 1200 mm 4. X stroke: 905 mm 5. C axis: 0–90°, 15 Nm, pneumatic 6. B axis: Servo 7. A axis: Not installed Equipment 1. Euromap standard mounting bracket (500 mm height) 2. 4 vacuum circuits 3. Venturi vacuum generator with blow-off function 4. 2 additional valves for mold air blow-off 5. Y-axis quick coupling according to LEGO specification 6. VDMA E12 interface (LEGO specification) 7. Conveyor synchronization (Band Takt) 8. Digital I/O No. 1 and No. 3 9. Operator interface in Danish 10. Operating manual in Danish

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,900 mm, control cabinet width: 76 mm, control cabinet length: 46 mm, control cabinet height: 92 mm, Geiger MotionLiner 10.0 XD Crjdpfjzhkn Ejx Ailsd Stock number: 503651 Machine type/ Device type: Handling Manufacturer: Geiger Type: MotionLiner 10.0 XD Year of manufacture: 2020 Handling weight: 10 kg Stroke X-axis: 600 mm Stroke Y-axis: 1200 mm Stroke Z-axis: 1900 mm Console dimensions: 115cm x 20cm x 76cm Control cabinet dimensions: 76cm x 46cm x 92cm Interface: EUR 67 Accessories: EASYTouch HT320Z

Condition: used, Year of construction: 2006, Wittmann robot W721-0575 year 2006 Crodpfozg U I Hsx Ailjd

Condition: used, Type: FM611E1 Credpfezcgc Nox Ailod 400V/3N - 15A - 50Hz - 9.2kW dimension Length: 980mm Width: 770mm Height: 840mm

Condition: excellent (used), Year of construction: 2015, Number of axis: 3 X- 580 mm Crsdpfx Aisy Ud Hdelod Y- 1000 mm Z- 1500 mm Reach: 1500 mm Payload: 3 kg Possible buy with rotary unit Gimatic OFN30-90SD or rotary unit Gimatic RBT30

Condition: good (used), Year of construction: 2022, Ref. no.: 18635 Manufacturer: SEPRO Type: 5 T25 Year of construction: 2022 Further information: The SEPRO S5-25 med is a powerful 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and cosmetic condition and comes from a clean production environment. The “med” version is specifically designed for medical manufacturing and cleanroom applications. The robot was used exclusively for testing and training purposes and therefore has very low operating hours. Cjdpfey Ub Edex Ailsrd The robot is additionally fitted with a Zimmer Group pneumatic rotation module and a Gimatic QCY90-A Quick Tool Changer system. The Zimmer module allows components to be rotated between defined positions, while the Gimatic system enables quick changing of grippers or vacuum tooling. These additional features increase the flexibility of the robot for a wide range of automation applications.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: R006176-01, Industrial Haitian robot SEPRO Success 22, MFG 2018, SN: R006176-01 Success is a range of universal and economic robots that provide all the performance and reliability that you expect from Sepro. These 3-axis servo controlled robots can quickly and precisely perform simple and peripheral pick & place operations around the IMM. The powerful Touch 2 control system is easy to use and controls Success robots. Specifications Traverse (Horiz) Stroke Min 1,500 mm Traverse (Horiz) Stroke Max 6000 mm Max Speed (Traverse) 2 m/s Kick (Ejector) Stroke Min 700 mm Kick (Ejector) Stroke Max 900 mm Cjdey S Uc Ropfx Ailord Max Speed (Kick) 2 m/s Vertical stroke minimum 1,400 mm Vertical Stroke Max 1,600 mm Max Speed (Vertical) 3 m/s Payload Max 10 kg Machine Tonnage Min 200 t Machine Tonnage Max 500 t Control CNC The buyer will be responsible for disassembling and getting everything ready for shipping; we will only cover the necessary logistical support, like a forklift. Price Euro 17.700 Euro + VAT, negotiable, ExWorks Simeria, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Wittmann W828 Z=2500 mm linear robot , payload 5kg Euromap 67 X= 1105 mm Y= 1200 mm Z= 2500 mm C is added in this price Gimatic brand Codpfsy Nkf Aex Ailsrd Vacuum : 2 Number of axis: 3 Reach: 2500 mm Payload: 5 kg

Condition: excellent (used), Year of construction: 2017, Year of manufacture: 2017 Control: Visual 3 (PLC, Parallel Subprograms) Additional I/Os in the robot rack: 7 inputs / 8 outputs + 4 additional 1/0 cards 16 inputs / 16 outputs Communication interface with injection moulding machine: EUROMAP 12 (length 10 m) Conveyor belt control: YES Control cabinet: Separate Documentation: YES Robot condition: very good Warranty: None X-axis travel: 2500mm Y-axis travel: 700 mm Z-axis travel: 1400 mm Payload: 5kg Servo R1: 182° Servo R2: 302° Workpiece gripping circuits: Number of digital vacuums : 8 Number of pressure circuits: 8 Crsdoy Ey Aiepfx Ailod

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Controls: Visual 2 (PLC, Parallel Subroutines) Additional I/Os in the robot rack: 7 inputs / 8 outputs + additional I/O card 16 inputs / 16 outputs Crjdpfx Aiey Eyzxjled Interface for communication with the injection molding machine: EUROMAP 12 (length 10 m) Conveyor Belt Control: YES Control cabinet: separately Documentation: YES Robot condition: very good Warranty: None X-axis travel: 3000 mm Y-axis travel: 700 mm Z-axis travel: 1400 mm R1 pneumatic head rotation: 0° - 90° R2 pneumatic head rotation: 0° - 180° and 0° - 90° Workpiece gripping circuits: Number of digital vacuum (level control from the robot panel): 2 (can work as pressure) Number of pressure circuits: 4 Number of digital vacuum (level control from the robot panel): 2

Condition: like new (used), Year of construction: 2018, operating hours: 7,500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The machine can be inspected/tested; original purchase price was €59,000! Technical Specifications: Z-axis (crosswise to the machine longitudinal axis) Stroke: 1,600 mm Max. speed: 3.0 m/s X-axis (parallel to the machine longitudinal axis) Stroke: 900 mm Max. speed: 2.0 m/s Y-axis (vertical/plunge axis) Stroke: 1,000 mm C-axis (for gripper rotation) - Swing range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Max. torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Second vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Third vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper Fourth vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper; Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4 Tenth pneumatic valve 5/3 with locked center position for gripper functions, piped to the gripper flange with quick-release couplings DN 2.7 for hose size OD 6 / ID 4; customer-side hose connection Codpfx Aiey Emm Ujljrd 8 freely programmable inputs for querying 8 gripper-mounted sensors, pre-wired to the gripper flange with a 25-pin connector; up to 8 sensors can be monitored; the corresponding mating connector for the gripper-side connection is included Second interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Third interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Fourth interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection Interface with 4 freely programmable inputs and outputs, non-isolated, on a 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), non-isolated, wired to a 72-pin socket on the MULTILIFT Push-in fitting for hose size OD 6 / ID 4

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Cedpfx Asy Duzqoilsrd Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: good (used), Year of construction: 2016, Sepro success 22 x=700 mm y vert=1400mm Z(horiz.)=2000mm +C +A(R1, R2) year: 2016 Cedpsy Av Hfjfx Ailsrd price: 14.500 Euro contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2016, overall weight: 150 kg, load capacity: 5 kg, terms of delivery: EXW (ex Works) delivery time: on request Crjdpfx Aoy Aba Dsilsd terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2006, X: 2500 mm Cjdpfx Asyyby Seiljrd Y: 1000 mm Z: 1500 mm R1: 0 - 90 ° R2: 0 - 180 °

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, X: 2500 mm Y: 1000 mm Z: 1500 mm Credpfx Aisyybx Uoled R1: 0 - 90 ° R2: 0 - 180 °

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, Very well-maintained Multilift V 15, like new! Csdpfsywtzvox Ailjrd

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Linear Robot / Take-out Robot SEPRO S5-25 med Manufacturer: SEPRO Robotique S.A.S. Model: S5-25 med Machine type: Linear robot / take-out robot – currently used on an injection moulding machine, but can also be used as a stand-alone unit for other applications Year of manufacture: 2024 Maximum output: 1.5 kVA Cjdjytnxgjpfx Ailerd Weight: 100 kg Voltage: 3×400 V to 3×480 V ±10 % Frequency: 50/60 Hz Short circuit withstand: 10 kA Automation system manufacturer: SEPRO Robotique GmbH CE marking: available Location: Freiburg

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Can be inspected and tested! Cedpfsyk U Hrex Ailord

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Crjdpfsyk U Enex Ailod Year of manufacture: 2007 Can be inspected and tested!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Cjdjyk U D Dspfx Ailord Can be inspected and tested!