Aluminiumtechnik Schubert

Condition: good (used), Year of construction: 2009, Machine is in good condition, 2009. Year of production. Gsdpfx Aox Hln Heg Deca Sinumeric control unit.

Condition: used, Year of construction: 2001, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, controller manufacturer: Heidenhain, controller model: TNC 430 M, total height: 2,830 mm, total length: 3,200 mm, total width: 2,600 mm, STEP TEC Spindle, Type HVC140-SB-10-15/42-3F-HSK-E40 Spindle Hours: 26,897 h Feed Drives: • Axes X, Y, Z: • A.C. servomotor, 3000 rpm with timing belt • Ball screw drives • 0–40 m/min • 1 g (10 m/s²) Tool Spindle 42,000 rpm • Tool holder: HSK E40 • Speed range: 100–42,000 rpm • Power at 40% duty cycle: 13 kW • Power at 100% duty cycle: 10 kW • Torque at 40% duty cycle: 4.25 Nm • Torque at 100% duty cycle: 3.2 Nm • Lubrication: oil-air Pallet Table HSM 400 • Erowa UPC: 320 mm × 320 mm • Max. workpiece weight: 200 kg Control Unit • Heidenhain: TNC 430 M Tool Changer • Number of tools (HSK E40): 36 Workpiece Changer (WPC) • Number of pallets: 7 Cooling Unit Gcsdpox Hii Isfx Ag Doa • Cooling capacity: 5.8 kW • Flow rate: 5 l/min Electrical Connection Data • Installed nominal power: 16 kW • Control voltage: 24 V DC • Operating voltage: 3 × 400 V – 50/60 Hz • EMC immunity: according to EN 50081-1 and EN 50082-2 • Radio interference suppression: according to EN 55011, Class A • Protection of 400 V/50 Hz supply: 30 A slow-blow (30AT) • Protection rating: IP 54 Additional Equipment: Chip conveyor, assortment of tools in the magazine, and touch probe

Condition: ready for operation (used), Year of construction: 2008, operating hours: 93,500 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, workpiece diameter (max.): 32 mm, TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Gjdpex E U Exsfx Ag Deca Spindle speed: 30,000 rpm Spindle taper: HSK-E40 Tool changer: 48 positions MACHINE DETAILS Number of axes: 5 Control: Fanuc Series 16i MB Power-on hours: 93,500 h EQUIPMENT Bar feeder LNS Hydrobar Express 332 Coolant filtration system Spindle cooling Through-spindle coolant (IKZ)

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller model: MILLPLUS, total height: 2,500 mm, total length: 5,500 mm, total width: 4,500 mm, rotary table diameter: 630 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 26,350 h, number of slots in tool magazine: 60, mount diameter: 40 mm, tool diameter: 100 mm, DECKEL MAHO DMU 60 P Hi-dyn CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Connection: 44 kVA - Linear scale resolution X/Y/Z-axis: 0.001 mm - Input increment X/Y/Z-axis: 0.001 mm - Position tolerance in X/Y/Z-axis: 0.010 mm - Max. tool length from spindle nose without tool breakage monitoring: 350 mm - NC rotary table clamping surface: 630 mm diameter Gcjdpfxjx E T R To Ag Dja - T-slot spacing: 63 mm - Number of T-slots: 9 - Centering bore: 50 mm diameter - Max. rotation speed of table plate: 10.7 rpm - Feedrate: 3600°/min - Measuring system resolution: 0.001° - Including chip conveyor and cooling unit - Note: The machine can be transported on a truck with a width of 3000 mm. Attention: The item must be collected on a binding date between 04 and 12 March 2026, to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2013, spindle speed (min.): 12,000 rpm, Machine type: CNC machining center 3+2 axes Model: DMU50 Ecoline Manufacturer: DMG Control: Siemens 840D with ShopMill user interface Year of manufacture: 2013 Location: Germany Travel range: X-axis 500 mm Gedpsx Exkxjfx Ag Djca Y-axis 450 mm Z-axis 400 mm Table 360° x 0.001°, -5°/+110° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 300 kg Tool magazine with 30 positions SK40 Chain with tool pots and double gripper Direct linear measuring system X, Y, Z including air purge RENISHAW probe kit for DMU50 ECOLINE Calibration tool with tool holder ICS pump 12 bar Scraper belt conveyor with enlarged 360 l coolant tank Coolant-air blow-off switch Coolant spray gun 4-color signal tower Electronic handwheel (Subject to errors and technical changes) For sale on behalf of a customer!

Condition: good (used), DECKEL MAHO 5-Axis Milling Machine DMU 50 eVolution - With probe Gsdpox Emxkefx Ag Doca - With handwheel - With several tools Good condition, fully functional, can be viewed and tested on site. Shipping also available abroad. Inspection: Please note that, to avoid misunderstandings, the item can gladly be inspected and tested under power before purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipment via forwarding agent.

Condition: used, Year of construction: 2003, operating hours: 68,200 h, functionality: fully functional, machine/vehicle number: 15035706824, controller model: ITNC 530 Softwarestand 11, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 21000 spindle hours Gedpfjx Ed Aqex Ag Deca

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Model 810 D General Data Measurements width 2815 mm Measurements depth 4325 mm Measurements height 2450 mm Machine weight 4010 kg Main Drive Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Table Godpox D Hbgsfx Ag Dsca Outer length 630 mm Outer width 500 mm Table load 200 kg Additional Equipment No. of Tools: 16 This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 2000 MM Measurements depth 2000 MM Measurements height 2000 MM Movement X-Axis Movement 400 mm Y-Axis Movement 320 mm Gsdpox D Er Refx Ag Doca Z-Axis Movement 400 mm Tools Type of tool holder Sk40 This KUNZMANN WF4/3 universal milling machine was manufactured in 1998. It features a clamping surface of 650 x 350 mm, a maximum load capacity of 250 kg, and a tool holder SK40. Speed ranges from 40 to 2500 rpm with a quill stroke of 60 mm. The machine includes a control cabinet and weighs approximately 1300 kg. Ideal for precise milling applications. Reach out for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, Main Drive Gsdpfxex D Hx Eo Ag Doca Spindle speed range 35 – 12000 Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 300 kg This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,913 h, Control Unit Gedpfx Aex D Eqgsg Deca Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle motor power 29/22 kW (40/100%ED) Number of axis 5 Spindle speed range 20 to 28000 rpm Movement X-Axis Movement 450 mm X-Axis Rapid Traverse 80 m/min Y-Axis Movement 580 mm Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 400 mm Z-Axis Rapid Traverse 80 m/min C-Axis Movement 360° This DMG Mori HSC 55 linear Universal Machining Centre was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time (spindle exchange at approx.7300 hours). The machine has a spindle speed of 20 - 28000 rpm and a capacity for 30 tools. It is equipped with a Heidenhain iTNC 530 control unit and has 5 axis. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Movement Gcjdpfx Agjx D Duks Doa X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, operating hours: 7,476 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Gcjdpfx Ajx D Dx Nog Doa Main Drive Number of axis 5 Spindle Speed 18000 RPM Tool taper HSK 63 Movement X-Axis Movement 400 mm Z-Axis Movement 375 mm Y-Axis Movement 400 mm This 5-axis DMG DMU 40 evo Linear was manufactured in 2016. It features a travel range of 400/400/375 mm, spindle speeds up to 18,000 rpm, and a tool magazine with 60 positions. Additional highlights include a pallet changer with two 400x400 mm pallets, internal coolant at 40 bar, and a Heidenhain iTNC 530 control system. Consider the opportunity to buy this DMG DMU 40 evo Linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, Technical Details x-axis travel: 750 mm y-axis travel: 600 mm z-axis travel: 520 mm Control: Heidenhain Main spindle: Speed range - main spindle: 20 - 18,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm Tool holder: HSK A63 NC rotary tilt table: Clamping surface: 700 x 500 mm Swivel range B-axis: 180° Rotatable C-axis: 360° Max. table load: 350 kg Centering bore: 30 H6 mm T-slots: 7x 14H7 x 63 mm Table rotation speed range: 21.5 rpm Tool magazine: Number of tool stations: 32 positions Max. tool length: 315 mm Max. tool diameter: 105 mm Max. tool diameter with adjacent magazine free: 130 mm Max. tool weight: 6 kg Feed rates: Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min Feed speed: 20,000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN Total connected load: 48 kVA Gcedex Dy Nkspfx Ag Dsa Machine weight approx.: 10 t Space required approx.: 6.5 x 3.5 x 2.9 m

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Gcjdpfx Asx A Umneg Doa Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm Gedpfx Agjx Auvve Doca T-slot width: 14H7 mm Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Including tool holders and zero point clamping system.

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale: 3+2 axis machining center by DMG, model DMU 35 M This machine comes from an educational institute and was primarily used for training in control operation and setup. Note the exceptionally low spindle hours. Technical specifications: Year of manufacture: 2009 Spindle hours: 625 Machine no.: 18065358844 X-axis travel: 350 mm Y-axis travel: 240 mm Gcsdpfx Aex Aiiqjg Doa Z-axis travel: 340 mm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servomotors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized Europe-wide upon request and at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2005, Type: DMU 80T2 Year of manufacture: 10/2005 Gjdsxz Rhljpfx Ag Deca Control: Heidenhain 3D path control iTNC-530 Clamping surface: 1250 x 700 mm (fixed table) Working area: X: 980 mm Y: 630 mm Z: 630 mm Spindle speed range: 20 – 12,000 rpm Feed rate: 0–10 m/min Tool changer: 32 magazine positions SK 40 Machine hours: Control on: 33,814 h Machine on: 29,764 h Program run: 8,237 h

Condition: good (used), DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2-axis CNC milling machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001-2003 Travel distances X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose to table: min./max. 145/485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1,750 kg Technical data subject to change! Equipment / Accessories: Direct position measuring system for 3 axes Spindle drive via servo motor with toothed belt 2 gearbox stages Full safety enclosure with sliding door Swiveling control panel Coolant nozzles on vertical head Coolant system Chip tray with coolant tank Gedpfxexz Rdae Ag Dsca Electronic handwheel Machine feet Machine lamp Interface Serial RS232C, LAN (RJ45) The machine is perfect for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It impresses with its versatility, with the additional manually operated rotary-swivel table allowing 5-sided machining. Available in March 2026 A total of 3 machines are available. Condition: Good to very good from a vocational training center, see pictures

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 9,000 rpm, CNC Heidenhain TNC 426 WORKING AREA: Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Rotation: 360° Tilting: -10° / +95° SPINDLE: Spindle speed: 9,000 rpm Power (100% / 40%): 9 / 13 kW Tool taper: SK 40 DIN 69871 AXIS DRIVE: Feed rate X, Y, Z: 10,000 mm/min Rapid traverse X/Y/Z: 12 m/min Gjdpoxz Axiefx Ag Djca TABLE: Manual rotary table with tilting axis Clamping surface: 700 x 500 mm Maximum load: 200 kg T-slot distance/size: 63 mm / 14 H7 TOOL CHANGER: Magazine capacity: 16 tools Maximum tool length: 290 mm Maximum tool weight: 6 kg DIMENSIONS AND WEIGHT: Dimensions: 1,783 x 1,647 x 2,534 mm (h) Weight: 3,000 kg Year: 2002

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, controller manufacturer: Heidenhain, controller model: TNC 426/430M, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is accordingly in a very tidy condition, and both the axes and spindle still run very smoothly! Equipped with Heidenhain electronic handwheel. Gcedexzf Erspfx Ag Dea Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Condition: good (used), DMU 60P hi-dyn, power-on 37,732 h, spindle 22,802 Gcsdpsxy T Ulofx Ag Dja

Condition: good (used), Year of construction: 2005, DMC 80U duoblock, year of manufacture 2005, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, 60-position automatic tool changer (ATC), coolant through spindle, serial no. 1147 000022 3, power-on hours: 42,344, spindle hours: 23,544 Gcsdpfoxy T Hnox Ag Dsa

Condition: good (used), Year of construction: 2004, DMC 80 U, year of manufacture 2004, CNC MillPlus IT, spindle 18,000 rpm, SK40 taper, coolant through spindle, ATC 60 positions, machine number 1120 000170 3, power-on 41,449 h, spindle hours 21,015 h. Gjdoxy Tybspfx Ag Deca

Condition: ready for operation (used), Year of construction: 2013, operating hours: 76,000 h, functionality: fully functional, Equipment: documentation/manual, The machine is powered and can be inspected and tested by appointment. Gjdoxyp Saopfx Ag Doca A current video is available upon request. Location: Neu-Ulm