Spinner AG

Condition: excellent (used), functionality: fully functional, Schaublin 102N precision lathe. Benchtop model. In good condition, fully functional. Distance between centers: 450 mm Center height: 102 mm Spindle: W20 Fodsziq Dpspfx Ad Ijgd Swinging diameter over cross slide: 120 mm and over bed: 200 mm Tailstock quill: MK2 Connection: 50 Hz, 3 x 380 volts.

Condition: used, Schaublin 102 VM We have a total of 5 units in stock. The price is 2000 Euros per unit. See photo. Fgodszicwbjpfx Ad Ied

Condition: used, Needs some attention and a new fan belt, otherwise it's in good condition. Fgsdpozicgijfx Ad Ied Accessories are shown in the photo.

Condition: used, Year of construction: 2009, functionality: fully functional, Turning machine with carriage and tooling. Fedpjzg Hk Tjfx Ad Iogd

Condition: good (used), Year of construction: 1996, operating hours: 7,352 h, functionality: fully functional, Max. turning length: 500 mm Max. diameter over the bed: 270 mm Max. diameter over the carriage: 130 mm Max. bar diameter: 28 mm Power: 15 kW Spindle speed: 0-5000 [rpm] with variable speed drive Fgodpfszgf U Rjx Ad Ied X x Z travel: 180 x 400 mm Power supply: 380 V 50 Hz 15 kW Dimensions: 1700 x 1226 x 1660 mm Weight: 1415 kg The delivery includes tool holders, collets, and other tooling accessories as shown in the pictures.

Condition: good (used), Conventional lathe, Pinacho model ML 18-250, year 2019. Distance between centers: 1,500 mm, main spindle bore: 58 mm, chuck diameter: 250 mm, swing over bed: 502 mm, bed width: 300 mm, Fagor Innova digital readout. Fsdpszcxnwefx Ad Ijgd

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Fedpfxjzb U Epo Ad Iegd Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, LOW USAGE - GE FANUC 20-T Fgedpfoy U Ntpex Ad Ied

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: BL278700, center height: 150 mm, turning diameter over cross slide: 177 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle nose: Camlock D 1-4, type of input current: three-phase, total length: 1,730 mm, total height: 1,300 mm, total width: 970 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, empty load weight: 1,250 kg, overall weight: 1,250 kg, For sale is a Schaublin 150 precision lathe from Switzerland. It is considered one of the best conventional lathes ever built. The machine has been overhauled. The spindle has been fitted with new bearings. The bearing set was ordered directly from Schaublin. The slides have been scraped. Turning tests with 30mm round steel resulted in a cylindricity of 0.002mm over 200mm. A large amount of accessories is included with the machine: - Reishauer 3-jaw chuck, 2x - Original Multifix B Mivesa tool holder - Collet chuck with lever clamp - Schaublin B32 collet set, 2 to 28mm, complete in 0.5mm increments, with MK5/B32 reducing sleeve and draw tube. - Steady rests - Machine documentation with catalog - Complete standard set of change gears, plus special gears - Conventional tool holder from Schaublin Fjdpfxey Uqx Ho Ad Isgd - Fixed and live center - Albrecht drill chuck - Coolant system - Digital readout The machine has not been used extensively in recent years and was only used sporadically. Extremely robust construction, suitable for hard turning. Center height: 150mm Distance between centers: 630mm Spindle bore: Ø40mm Spindle speed, continuously variable: 55-3,000 rpm Feed rate: 0.05-0.35 mm/rev Spindle taper: MK5 Tailstock taper: MK3 Swinging diameter over cross slide: Ø177mm Swinging diameter over bed: Ø340mm Motor: 4.5kW Dimensions: 1,730x970x1,300mm Weight: 1250kg The machine can be inspected and tested under power by arrangement in 5023 Salzburg.

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Fgsdpfx Asy Smvpod Ijd Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm

Condition: excellent (used), For sale is a set of steady rests for a Schaublin 150 lathe. Very good condition. Includes a set of 3 roller jaws. Price is for the complete set. Shipping available or collection in 5023 Salzburg. Fgodoy Rdaiepfx Ad Ied

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Fgsdpoy N Td Uefx Ad Iod Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control .

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Fgodpfxey N N N Ts Ad Ied

Condition: good (used), Schaublin 102 N, machine number BL 329218, year of manufacture approx. 1998, center height 102 mm, center distance 375 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, spindle speed up to 2,800 rpm, tailstock, accessories, Fjdpfoy Hip Iex Ad Ijgd

Condition: good (used), Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, Fgsdpey Hin Rjfx Ad Ied max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Fodpfxey Egmho Ad Ijgd Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Fgodpfx Adsy Avyxs Iod Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm Fjdpfx Adjywtd Ds Iogd 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. Fedpfxjxyh Nqs Ad Iogd The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. The lathe is locate in our warehouse and ready for shipment and any time.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Fgodpfx Adexdmgvj Iod Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Fedpfx Adew N Rh Aj Ijgd Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Fjdpfx Aow Iq Umsd Iegd Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: Fjdpfowvq Tmsx Ad Iegd >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Fgodewqxcfspfx Ad Iod Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: used, CNC lathe KUMMER K250 LSK Fedpfswdafujx Ad Iogd